Spirit T-COM VB Manuale utente
Contents:
Warranty Details
Welcome
2
General Safety Instructions
2
Motorcycle BluetootlfProduct Features
3
Parts List
4
Technical Specification
4
Product Controls
5
Fitting to your helmet
6
T-COMVB functions
g
TCOM-SC functions
12
Troubleshooting
17
Helmet BIuetootI1’Intercom Kit
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts
for a period of 6 months from the date of purchase. Defects that occur
within this warranty period, under normal use and care, will be repaired or
replaced at our discretion.
You are entitled to replace or repair the goods within warranty period and
get compensation for any other resonable foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the it fails to
be of acceptable quanlity and the failure occurs under normal use.
Welcome
Congratulations on choosing to buy T-COMVB / TCOM-SC. By doing so you now
have the assurance and peace of mind that comes with purchasing a product
made by one of the leading manufacturers. All products brought to you are
manufactured to the highest standards of performance and safety and, as part of
our philosophy of customer service and satisfaction, are backed by our
comprehensive 6 months Warranty. We hope you will enjoy using your purchase for
many years to come.
General Safety Instructions
Read this manual thoroughly before first use and keep it in a safe place for future
reference, along with the warranty card, purchase receipt and carton. The safety
precautions enclosed herein reduce the risk of fire, electric shock and injury when
correctly adhered to. Follow all instructions and take notice of all warning to
reduce the risk of fire or electric shock.
•
Do not remove the cover or the back of this product. There are no user-
serviceable parts inside this product.
• Do not repair the unit yourself. Only have it serviced by qualified personnel.
Supervise young children to ensure they do not play with the product.
•
Do not submerge the product in liquids.
•
Do not place the product near other items that may damage it, such as naked
flame sources (lit candles) or excessive heat (Bar radiator).
WARNING: Using headphones while operating a motorcycle, motor vehicle,
watercraft or bicycle can be dangerous, Use caution while using your motorcycle
Helmet Bluetooth”Kit when you are engaging in any activity that requites your full
attention.
Motorcycle Helmet BIuetooth”Kit
Product Features
• Complete system for all your communications needs while riding your
motorbike.
• The Bluetooth’function will keep you connected to your mobile phone, play
music and connect with BIuetooth°GPS systems.
• The intercom means you can communicate with your pillion or other riders
within 800m while you ride. With simple set up and clear sound
quality you will always be in touch.
Parts List
1.
1(2)=Bluetooth”Receiver 5. 4(8)•FeIted Adhesive Earphone Pads
2.
1(2)=USB Cable 6. 1(2)•Ear Speaker & Microphone Headset
3.
1 Screw Driver 7. 1•Headset Clip & Fastening Screws
4.
1(2)=Power Adaptor
Note: Different country may have different power adaptor.
1.
3.
, e
Technical Specifications
BIuetootI1”Version:2.1+EDR
Frequency:2.4GHz
Supports:A2DP and AVRCP
Supported BT Profiles:
BIuetooth’Headset and Hands free
Profiles with Automatic Detection
Operating Range: Up to 10m for cell
phones; up to 800m for intercom
function.
Weight: 45grams(excluding
accessories)
Size:81mm(L)•31mm(W)=25mm(H)
Battery Type: Rechargeable
Polymer 400mAh
Stand by: Up to 300hrs
Talk Time
-Phone: Up to 10 hours
-Intercom: Up to 7 hours
Charging Time: About 4 hours
Headset: High Power ultra slim
speaker with integrated boom
Power Adaptor: DC 5V 500mA
+
SKIP/VOL
FM RADIO
SKIP/V
O
L
-
Instructions
Fitting the Bluetooth°receiver to your helmet
1.
Using the provided screw driver, loosen the
Headset Clip screws.
2.
Slide the Headset Clip onto the left side of the
helmet (when on your head).Take care to
place the inside of the Headset Clip under the
helmet padding.
3.
Adjust the clip until you find the best location
for your helmet. Ensure that the slots in the
headset clip mount are facinp away from the
helmet.
4.
Tighten the screws to hold the clip firmly in
place. WARNING: Excessive tightening may
damage the clips.
5.
Slide the Bluetooth’receiver down into the
slots on the headset clip mount. Make sure
that it is locked in securely.
6.
To attach the ear speaker & microphone
headset, test which part of the helmet will be
the best location by putting your helmet on
and locating the place closest to your ears.
You will need to put the helmet on a few times
to find the optimum position to apply the pad.
when the correct position is found, remove the
adhesive protective strip and apply the felted
earphone pad.
7.
Attach ear speaker to the felted pad. Run the
microphone arm along the inside wall of the
helmet, to where your mouth will be. the
microphone arm is flexible and should to adjusted
so it sits in the bast position in front of your mouth.
Some helmet have removable to run the speaker
and microphone under the padding.
B.
Connect the headset to the Bluetooth’receiver.The
plug can only be inserted in one orientation.
WARNING: Inserting the plug backwards will cause
damage to the Bluetootlfreceiver. Use caution
when assembling.
Secure the cord of the headset plug inside the
helmet. Tuck any extra wire into the helmet.
Ensure that only few centimetres of the cord
comes out.
You have successfully mounted the
motorcycle helmet Bluetooth”
T-COMVB
..........page8-11
Charging the BluetootlYDevice
Before using this device, fully charge the Bluetooth“device.
1.
Insert the USB plug of the charging cable into the small USB jack on the
headset. Insert the other end of the charging cable into the Power Adaptor or
your computer’s USB port.
2. While charging, the red LED on the headset module will illuminate, when the
charging is finished, the red LED will switch off. A normal charge from a low
battery will take about 4 hours.
Tip: To maintain long life from the internal polymer battery, charge your
device at least once each month.
Powering 0n and Off
1.
To turn the device on, press the Power/Intercom button for 3 seconds until
you hear a beep. a blue light will flash quickly 3 times and then continue short
flashes at regular intervals.
2.
To turn the device off, press the Power/intercom button for 5 seconds until
you hear a beep. The headset and LED lights will turn off.
Pairing to your BluetootéEnabled
Mobile Phone
1.
Place your Bluetooth”enabled phone and the Bluetootlfreceiver near each
other (within 1m).
2.
Make sure the Bluetooth°receiver is turned off.
Indice
