Sporasub FLASH Manuale utente
1
LED FLASHLIGHT
FLASH
Compliments for having purchased the LED
flashlight "FLASH" from Sporasub. This flashlight is
the result of technological advances made over
years of experience in the underwater fishing
sector. Its versatility and functionality, combined
with the highest quality materials and the
technological design, make this flashlight truly one-
of-a-kind, and essential for skindiving and
underwater fishing.
The simple shape and small size make it easy to
carry and it can be hooked to any part of your
equipment, thus limiting any encumbrances. The
FLASH flashlight was designed for skindiving;
however it can be easily adapted to scuba diving.
The concentrated light beam is created by an
aluminium covered plastic dish that is designed
with a 10° angle and an additional front lens in
polycarbonate. This system provides a beam with a
maximum intensity of 200mm in diameter at a
distance of 1 metre between the flashlight and the
wall to be lighted, with a remaining ring of lower
intensity with 1.5 metres in diameter. Thus the light
beam is able to penetrate underwater rock caves
or cavities with ease.
IMPORTANT WARNINGS
WARNING: Before using the FLASH flashlight,
carefully read this manual.
WARNING: Do not aim the flashlight directly
into your own eyes or those of other people,
either out of water or underwater.
WARNING: Make sure to block the switch when
transporting the flashlight, in order to avoid
turning it on by accident.
WARNING: Make sure to remove the batteries
during plane flights.
WARNING: When changing the batteries,
remember to check the + and – signs.
WARNING: Use only high quality batteries, e.g.
Energizer AA Lithium.
WARNING: When leaving the flashlight unused
for long periods, be sure to remove the
batteries.
WARNING: When leaving the flashlight unused
for long periods, slightly unscrew the front
metal ring in order to avoid blockage.
2
3
GENERAL WARNINGS
•Do not keep the flashlight in the ON
position when out of water.
•Do not unscrew the front metal face when
underwater or when the flashlight is wet.
•Do not place the flashlight near high
temperature heat sources.
•Only use original spare parts for ordinary or
special maintenance, including original light
bulbs.
•Do not use batteries that have different
charge levels.
•Clean and lubricate the ORings
occasionally, using silicone oil/grease.
•Periodically check the wear and tear on the
ORings and replace them if they appear
worn.
TECHNICAL FEATURES AND SPECS
•Body made in highly resistant ABS with
overprinted thermal-rubber parts.
•Optical group and concentrated beam.
•Tempered glass panel.
•Front ring in anodized aluminium, covered in
non-slip thermal rubber.
•Sliding magnetic switch, with a double Off
position, in order to avoid switching it on by
accident. This flashlight is equipped with an
automatic recall spring for the Off position,
specifically designed for skindiving (in order to
keep the switch in the On position, you must
keep the switch pressed during its use). In
order to allow for constant use, the recall spring
can be removed and the On position can be
kept, by using the catch set in that position.
4
5
•N°1 LED, white with strength of 6200 °K – 8.5
watt 900 Lumen driven by specific electronics.
•ORing in silicone, watertight with glass front.
•Double toroidal ORing in NBR, 2.62 mm string,
for watertight sealing between the aluminium
ring and the body of the flashlight
•Band in polyurethane, easily adjustable.
Moreover, it has been designed to safely
unhook under high traction force if the flashlight
gets snagged in the cave or cavity during diving.
6
FEATURES LED FLASH
Power 8.5 W
Lumen 900
LUX More than 5500
Volt 9.0 V
Battery type
We suggest the use of Energizer
Lithium L91 AA format, 1.5 V
Battery location
Directly in the flashlight body
through the diagram, to be strictly
followed.
Supplied LED 1 Power LED 8.5W
Body Material ABS with overprinted thermal-
rubber parts.
Face/lens Material PBT thermal-resistant aluminium
coated resin
Panel Tempered glass panel.
ORing NBR and Silicone for water-tight
sealed glass
Weight in air 390 grams with 6 Lithium batteries
inserted
Weight in water 230 grams with 6 Lithium
batteries inserted
Length 195 mm
Diameter 59 mm
Switch Sliding magnetic switch
Safety catch on switch Mechanical, with 2 OFF positions
and 1 ON position (without spring)
Heat temperature 6200°K
Light Beam Concentrated (200 mm diameter
at 1 metre from the flashlight to
the wall to be lighted)
Range durability,
continuous use
Up to 120 minutes with Energizer
Lithium batteries
Range durability,
irregular use
Up to 300 minutes with Energizer
Lithium batteries
BATTERY INSERTION
WARNING: It is very important that you insert
the batteries correctly according to the + / -
signs!
7
8
•Unscrew, in the counter clockwise direction,
the front face of the flashlight.
•Insert the batteries following + / - directions
indicated on the rack.
•Lubricate the watertight ORings with a thin
layer of silicone.
•Screw down, in the clockwise direction, the
face of the flashlight.
•Make sure that the flashlight turns on
correctly by activating the switch.
WARNING If the batteries are placed in the
wrong position (inverted polarities), a short
circuit will be created, causing permanent
damage to the flashlight, with the possibility of
explosion!
CHECKS TO BE CARRIED OUT BEFORE DIVING
•If the flashlight hasn’t been used for some
time, check the state of the batteries by
turning on the flashlight.
•Make sure the body is perfectly closed.
•Once in water, check that there is not a
constant presence of air bubbles coming
out of the flashlight body.
Indice
Lingue:
Altri manuali Sporasub Torcia elettrica
