spovan BRAVO II Manuale utente
TO
TOTO
TO BE
BEBE
BE GREAT
GREATGREAT
GREAT
spovan
spovanspovan
spovan
BRAVO Ⅱ
ⅡⅡ
Ⅱ
user
manual
1.0
Introduction
Thank
you
for
purchasing
of
this
watch.
Your
watch
features
electronic
sensors
which
measure
and
shows
the
outdoor
conditions:
temperature,
pressure,
altitude
and
compass
directions.
Your
Watch
provides
the
essential
information
at
the
time
during
you
are
performing
hiking,
wild
camping
and
other
outdoor
activities
especially
for
a
prolonged
period.
Your
Watch
also
includes
current
time,
daily
alarm,
chronograph,
timer,
pacer
and
dual
time
function.
Your
Watch
is
carefully
designed
and
produced
for
outdoor
activities
which
need
to
stay
for
a
period,
in
order
to
utilize
these
features
of
your
watch,it
is
advisable
to
read
the
following
instructions:
Read
the
instruction
before
using
the
Watch.
Avoid
e posing
your
Watch
to
e treme
conditions
for
an
unreasonable
time.
Avoid
rough
usages
or
severe
impacts
to
your
Watch.
Do
not
open
the
Watch's
case
unless
a
certified
service
agency
because
your
Weather
Master
contains
precise
electronic
sensors
and
components.
Clean
your
Watch
with
a
soft
cloth
occasionally
that
working
for
a
longer
use
life
of
your
watch.
Keep
your
Watch
away
from
magnets
or
the
appliances
mobile
phones,speakers
and
motors.
Store
your
Watch
in
a
dry
place
when
it
is
not
in
use.
2.0 Buttons And Its Functions
A key：
：：
：back light: to turn on the EL back light for 3seconds.
B key：
：：
：setting mode：To select among the current time, daily alarm,
stop watch, time, pacer, and dual time mode. Press and hold B key to
switch to the setting mode.
C key: barometer decrease: press C key to enter barometer mode.
D key: compass: press D key to enter compass mode.
E key: altimeter increase：
：：
：press E key to enter altimeter mode.
3.0 Major Function Modes
4
.0
Current
Time
Mode
—
Functional
Display
F
unctional
D
isplay:
The current mode includes 4 kinds of functional display:
Day
of
week
display
Temperature
display
Altitude
tendency
display,
and
Sea
level
pressure
tendency
display
To select among different functional display, press and hold E button
following the adjacent diagram.
Automatic
Display
Switching
1. To activate the automatic switching feature, press and hold the E
button.
2. One of the 4 functional display will be appeared one by one.
4
.
1
Current
Time
Mode
-Setting
the
current
time
How to Set the Current Time
1. Press and hold B button for about 2 seconds in current time mode.
In setting display, the flashing “SET” icon will appear.
2. In setting display, Press the B button to change the selection
following the adjacent current time setting sequence.
3. When the second digits are flashing(selected), press the E or C
button to reset the digits to “00”.
4. When the digits are flashing(selected), press the E or C button to
increase/decrease the number. (Hold down the button change the
number at a higher speed).
5. When month-day order setting is selected, press the E or C button
to select between month-day and day-month format. When 12/24
hour format setting is being selected, press the E or C button to select
between 12 and 24 hour format.
6. When LCD contrat is selected, press the E or C button to
increase/decrease the contrast level(1-10). When key beep setting is
selected, press the E or C button to select between ON and OFF the
beep.
7. When the setting is completed, press and hold the B button to e it
the setting display.
8. It will e it the setting mode if without keystroke operation for 1
minute.
5
.0
Daily
Alarm
Mode-Daily
Alarm
and
Chime
Display
Daily Alarm mode
1. The watch includes two daily alarms: Daily Alarm 1 and Daily
Alarm 2, the Daily Alarm 1 and Daily Alarm 2 are working
independently.
2. Press the E button to switch among the Daily Alarm 1 and Daily
Alarm 2 and Chime Display following the adjacent diagram.
How to turn ON OFF the Daily Alarm
1. To turn ON/OFF the Daily Alarm 1(2),press the C button in Daily
Alarm 1(2) Display.
2. When the Daily Alarm 1(2) is ON, the alarm indicator will
appear.
3. If the Alarm indicator is appeared, the watch will sound at the
preset alarm time every day. When the alarm sounds, press any
button to stop the beep.
How to Turn ON OFF the Hourly Chime
1. To turn ON/OFF the Hourly Chime, press the C button in Chime
Display.
2. When the chime is ON, the chime indicator will appear. If the
chime indicator is appeared, the watch will beep once at the hour
every hour.
5
.
1
Daily
Alarm
Mode-Setting
the
Alarm
How
to
set
the
Alarm
1
and
Alarm
2
1. To select the setting display, hold the B button for about 2
seconds in Alarm 1(2) Display, then the flashing “SET” icon will
appear.
2. In setting display, press the B button to change the selection
between minute and hour.
3. When the digits are flashing(selected), press the E or C button to
increase/decrease the number. (Hold down the button to change the
number at a higher speed).
4. When the set is completed, press and hold the B button to e it
the setting display.
Indice
