NOTICE:
Spring USA induction servers and induction ranges are
designed to work together as a system. Optimal
performance is achieved by using Spring USA
components in conjunction with each other. Spring USA
cannot guarantee the performance of facsimile products
offered by other companies.
67
Follow the below steps for operating the induction range:
1. Plug in the unit. Press the ON/OFF button.
2. Place the vessel on the countertop surface just above where the
induction range is hidden.
3. The LED lights above each setting will blink until a setting is pressed.
NOTICE:
As a safety feature, if no induction ready vessel is placed
on the surface after 2.5 minutes, the unit will shut off.
Operation
To operate the induction range and ensure the surface material remains
unaffected, approved vessels must be used with approved surfaces.
SmartStone™is Spring USA’s proprietary stone designed specifically to
work together with Spring USA vessels for maximum performance and
precision. SmartStone™is the preferred surface for use with the
MultiSurface Hidden Induction Range.
For other surfaces, refer to the below list for approved surfaces and
vessels that can be used with the Multisurface Hidden Induction Range.
Surface Brand Surface
Material
Surface
Thickness Vessels
SmartStone™Porcelain 1.2 cm / 2 cm
max
1.2 cm thick:
All Spring USA Induction-
ready Vessels
2 cm thick:
Round Sauteuse Server
Square Server
Oatmeal/Soup Server
Servella
IronLite
Wynwood by Skyra
Silestone* Quartz 1.2 cm / 2 cm
max
Fiandre Porcelain 1.2 cm / 2 cm
max
Eiffelgres Porcelain 1.2 cm / 2 cm
max
Iris Ceramica Porcelain 1.2 cm / 2 cm
max
Fmg Porcelain 1.2 cm / 2 cm
max
Ariostea Porcelain 1.2 cm / 2 cm
max
All other surfaces & vessels –inquire for testing.
Approved Surfaces & Vessels:
*Requires SurfaceGuard.
Spring USA’s SurfaceGuard, item #SES651, helps expand the
compatibility of the MultiSurface Hidden Induction Range with other
approved surfaces under 2 cm thick. The SurfaceGuard prevents
cracking or staining of the surface. When noted, the SurfaceGuard
should always be in place between the approved vessel and
approved surface for further protection.
SurfaceGuard:
