Thank you for purchasing our product!
This product complies with the following standards:
IEC60598-1:2003
IEC60598-2-17:1984+A2:1990
On receiving products, please carefully check that there has been no damage caused in transportation
and that the following parts are enclosed:
Main features:
»The lightings can be spliced easily by every 30 degrees direction to a bar, square, round, S curve, arc and
so on .
»high-power RGB 3-in-1 LED
»Four digital LED display control board
»Stand alone,DMX,Master-slave control mode
»Over temperature protection
Safety information
Important: Every person involved with the installation, operation and maintenance of this device has
to be qualied and follow the instructions of this manual. Manufacturer will not with responsibility
for those operations not according to this Instruction.
»Verify that the voltage matches the rated voltage.
»Before using the xture, check that all power distribution equipment and cables are in perfect condition
and rated for the current requirements of all connected devices.
»Always ground (earth) the xture electrically.
»Avoiding hit the Light when you are move or install the light.
»The minimum distance between light-output and the illuminated surface must be more than 0.3
meters. Keep all combustible materials (for example fabric, wood, paper) at least 0.2 meters away from
the xture .
»Do not expose the xture to rain or moisture.
»Avoid looking directly into the light source (especially those who suer from epileptic ts)
»Maximum ambient temperature (Ta) is 40°C.
»The Maximum surface temperature is 65°C
»When suspending the xture above ground level, verify that the structure can hold at least 10 times the
weight of all installed devices.
»Verify that all external covers and rigging hardware are securely fastened and use an approved means of
secondary attachment such as a safety cable.
Manual | Modular Series 1x15W RGB
