SR Instruments SR300 Manuale utente

Model – 3000 Gram x 1 Gram Scale

Instruction Manual - S/N 1000+

Part No.: MAN315_110121 Page 1 of 2

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: 716-693-5977 Fax: 716-693-5854 URL: www.srscales.com

SPECIFICATIONS

Max. capacity: 3,000g/105oz

Min. capacity: 5g/0.2oz

Division: 1g/0.1oz

Power source: Two (2) CR2032 lithium

batteries

Accuracy: 0.2% +/- 1 digit of

displayed resolution for

calibrated range

FEATURES

Portability: Small and compact

Tare: Single button

Two units: Gram or ounce

Auto power off: 120 seconds

Warranty: Two (2) years

BATTERY INSERTION/

REPLACEMENT

1. Remove the Battery Compartment Cover by

pressing the tab towards the cover and lifting it

off (Figure 2).

2. Insert two (2) 3-Volt lithium batteries (CR2032)

with battery “+” in the up position.

3. Replace the Battery Compartment Cover.

TO OPERATE SCALE

1. Place scale on a flat surface in a sheltered area.

2. Press “ON/OFF” button to zero (“0”) scale.

3. Press “Kg / Lb” button to select between grams,

kilograms, ounces, or pounds and ounces.

4. Scale is ready for use.

USING THE TARE FUNCTION

1. Place scale on a flat surface in a sheltered area.

Press the “ON/OFF” button to turn the scale on.

2. When “0” appears place the empty container

onto the weighing platform.

3. Press “TARE” button and display will return to

zero, eliminating the weight of the container.

4. Place object to be weighed into the container to

obtain the net weight.

5. Press “TARE” button again to exit.

MANUAL POWER OFF

After use, turn the scale off by pressing the

“ON/OFF” button to prolong battery life.

AUTO POWER OFF FEATURE

The scale is also equipped with an “AUTO

POWER OFF” function. It will turn off in

approximately 120 seconds.

HOLD FUNCTION

1. To temporarily retain weight. Place item on the

scale. Press the “HOLD” button once.

2. Remove the item from the scale. The held

weight will remain on the scale display for 5

seconds.

CAUTION TO BE EXERCISED

1. Place the scale in a sheltered area when in use.

Air movement on the scale may affect accuracy.

2. Always place object onto the platform gently.

DO NOT weigh objects exceeding the full

capacity as this may permanently damage scale.

An “o-Ld” message will appear on the display if

the scale is over-loaded.

3. Replace with two (2) CR3032 lithium batteries

when battery symbol appears (Figure 2).

CALIBRATION METHOD

1. Calibration switch is located under “VOID”

sticker; use a small screw driver to slide switch,

inside scale to Cal mode.

2. A random number will be displayed. Press the

“ON / OFF” button to display “3000gr”.

3. Place a 3000 gram calibrated weight on scale.

4. Press “ON / OFF” button. The scale will

display “CAL” and then “PASS”.

NOTE: If “o-Ld” appears; recalibrate.

5. Remove weight. Slide calibration switch out of

Cal mode.

6. Place 3000 gram weight back on scale to verify

calibration.

Model – 3000 Gram x 1 Gram Scale

Instruction Manual - S/N 1000+

Part No.: MAN315_110121 Page 2 of 2

SInstruments, Inc., 600 Young Street, Tonawanda, NY 14150

Tel: 716-693-5977 Fax: 716-693-5854 URL: www.srscales.com

SCALE ASSEMBLY

1. With the scale OFF, gently remove the top of

the scale by lifting the surface plate and

unsnapping it from the four (4) holes in the

weighing plate.

2. Insert perch mounting screw along with washer,

through the hole in the surface plate. Place

Loctite® on screw. Thread screw into bottom of

the perch and tighten in place (Figure 1).

3. Carefully align and snap the four (4) snaps on

the surface plate back into the weighing plate

(Figure 1).

TWO (2) YEAR LIMITED WARRANTY

SR Scales®systemsare manufactured with high quality

components. SR Instruments, Inc. warrants that all

new equipment will be free from defects in material

or workmanship, under normal use and service, for

a period of two (2) years from the date of purchase

by the original purchaser. Normal wear and tear,

injury by natural forces, user neglect, and

purposeful destruction are not covered by this

warranty. Warranty service must be performed by

the factory or an authorized repair station. Service

provided on equipment returned to the factory or

authorized repair station includes labor to replace

defective parts. Goods returned must be shipped

with transportation and/or broker charges prepaid.

SR Instruments, Inc.’s obligation is limited to

replacement of parts that have been so returned and

are disclosed to SR Instruments, Inc.’s satisfaction

to be defective. The provisions of this warranty

clause are in lieu of all other warranties, expressed

or implied, and of all other obligations or liabilities

on SR Instruments, Inc.’s part, and it neither

assumes nor authorizes any other person to assume

for SR Instruments, Inc. any other liabilities in

connection with the sale of said articles. In no

event shall SR Instruments, Inc. be liable for any

subsequent or special damages. Any misuse,

improper installation, or tampering, shall void this

warranty.

Figure 1: Scale Assembly

CAUTION

The integrated circuits and semiconductors on the

printed circuit boards may be damaged by

electrostatic discharge (ESD). Be sure to use

proper handling precautions at all times.

CALIBRATION

SWITCH ACCESS

IS LOCATED

UNDER STICKER

BATTERY

COMPARTMENT

Figure 2: Battery Compartment Cover

Indice

Altri manuali SR Instruments Scala

SR Instruments

SR Instruments ST Scales SRV930KG Series Manuale di servizio

SR Instruments

SR Instruments SRV710W Series Manuale di servizio

SR Instruments

SR Instruments SR Scales SR463iR-PH Series Manuale di servizio

SR Instruments

SR Instruments SR Scales SRV957IFS Manuale di servizio

SR Instruments

SR Instruments SR Scales SRV712W Manuale di servizio

SR Instruments

SR Instruments SR755KG Manuale di servizio

SR Instruments

SR Instruments SR Scales SR 735i Manuale di servizio

SR Instruments

SR Instruments SR Scales SR7010i Manuale di servizio

SR Instruments

SR Instruments SR Scales SR7005i-KG Manuale di servizio

SR Instruments

SR Instruments SR Scales SRV713 Manuale di servizio

SR Instruments

SR Instruments SRSCALES SRV411i Manuale di servizio

SR Instruments

SR Instruments SR Scales SR463iR-PH Series Manuale di servizio

SR Instruments

SR Instruments SRScales SR465 Manuale utente

SR Instruments

SR Instruments SR Scales SR585i-KG Manuale di servizio

SR Instruments

SR Instruments SR Scales SR555i-KG Manuale di servizio

SR Instruments

SR Instruments SRScales SRV714 Series Manuale di servizio

SR Instruments

SR Instruments SR Scales SRV930 Manuale di servizio

SR Instruments

SR Instruments SRScales SR7000i-KG Manuale di servizio

SR Instruments

SR Instruments SRScales SRV947R Manuale di servizio

SR Instruments

SR Instruments SR Scales SRV716W Manuale di servizio

SR Instruments

SR Instruments SRScales SRV716W Series Manuale di servizio

SR Instruments

SR Instruments SRScales SR7000i Manuale di servizio

SR Instruments

SR Instruments SR Scales SRV95 Series Manuale di servizio

SR Instruments

SR Instruments SR Scales SRV957 Manuale di servizio

Manuali Scala popolari di altre marche

AWS

AWS ZEO-50 Manuale utente

Gima

Gima Glass Body Fat Analyzer Manuale elenco delle parti

Seca

Seca 374 Manuale utente

TEC

TEC TEC SL59 SERIES Manuale utente

Axis

Axis B/E Series Manuale utente

Alecto

Alecto ACW-40 Manuale utente

Rice Lake

Rice Lake MSI-4260 IS Manuale utente

IKA

IKA RCT basic safety control Manuale utente

ADE

ADE M20011 Manuale utente

Duronic

Duronic KS3000 Manuale utente

Digi

Digi SM-720 Manuale utente

Cardinal

Cardinal CS Series Manuale utente

Korona

Korona Kastella Manuale utente

A&D

A&D FC-50Ki Manuale utente

BDA

BDA CAMARGUE Manuale utente

Tanita

Tanita HD-357 Manuale utente

Leifheit

Leifheit 03173 Manuale utente

Lumme

Lumme LU-1340 Manuale utente