Sricam NVS010 Guida utente

Wireless NVR

Quick Operation Guide

Applicable to NVS010

V1.0 CN202310

English

1. Connect the host correctly (as shown below)

3. If the camera test screen displays normally, then select the camera installation location

according to the channel corresponding to the screen.

(Tips: It is recommended that the installation location have as few partition walls as possible, and

the network signal is relatively stable within 30 meters of indoor installation)

Camera (12V)

NVR power supply(12V/2A)

Router

HDMI or VGA

Monitor (optional)

Mouse (optional)

WiFi

CH1

CH3

CH2

CH4

+2023-10-25 16:45:29

User Name

Tips

Cancel

password

Forget Password?

admin

2. After powering on and waiting for startup to complete, you will see the camera screen on

the host display. (NVR default login password: 888888)

Install wireless NVR

(1) Please use the power adapter provided by the manufacturer to connect

(2) Connect the NVR to the router through a network cable (for local access, please skip this step)

888888

If the product you purchased does not come with a hard drive, please purchase a 2.5-inch

hard drive by yourself, 4T is recommended (maximum support is 16T)

Notice:

A: The camera has been paired with the NVR host at the factory, so there is no need to configure WiFi.

B: If you purchase a single product of NVS010 and need to add a camera, please refer to pages 3-4

of the manual.

The hard disk installation method is as shown below:

Note: Please do not connect the NVR to the power supply before installing the hard disk.

(1) Open the hard drive compartment cover from the buckle underneath the hard drive compartment.

(2) Connect a 2.5-inch SATA hard drive to the NVR hard drive interface and fix it on the hard drive

compartment cover with screws.

(3) Fasten the hard drive compartment cover.

2.5”HDD

NVS010 output VGA/HDMI settings

Click the start menu in the lower left corner -> click the normal device icon -> click

"Advanced" -> turn on "HDMI Display"

Warn:

After the HDMI interface is turned on, the current host will no longer be

displayed, and an external monitor must be connected to display it.

NVR installation hard disk

CH1

CH3

CH2

CH4

+2023-10-25 16:45:29

Add IPC

General

Camera

Record

Backup Maintenance

Motion

Ring

Network

HDD

P2P

Playback

Normal settings

Startup Wizard

Advanced

HDMI display

Screen Saver

Reset

Note: If the camera does not emit a "beep", "beep", "beep" network configuration prompt after 30 seconds

of power on, please keep the power on and hold the Reset button for 5 seconds. After hearing a long beep,

let go and wait for the camera. Restart.

CH1

CH3

CH2

CH4

+2023-10-25 16:45:29

Added Device List

Index IP address Mac address type operate

idle

Add

idle

Add

idle

Add

idle

Add

idle

Add

idle

Add

idle

Add

idle

Add

Set up relay wireless status

Method 1: Scan the QR code to add

It will take about 30 seconds after the camera is powered on to complete the power-on process.

After hearing the beep, beep, and beep sounds from the camera, do the following:

(1). Click the icon in the lower left corner of the monitoring display

(2). Click "Add" on the right side of the device list, and then select "QR code"

(3). Aim the camera lens at the QR code and keep a distance of 20-60cm. After the camera

recognizes the QR code, the camera emits a "ding" sound, indicating that the network

configuration is successful. After successful pairing, wait a few seconds to see the video in the

preview interface.

How to add a camera

Warn: Do not delete the camera in the added device list. After deletion, you need to pair it again.

Select IPC connection method

Tip

Pair QR code

Reset

+2023-10-25 16:45:29

Available device list

Add IPC

Serial number IP Address Mac Address

1 192.168.1.4 00：2A:2B:FE:55:E0

00：2A:2B:FE:55:ED

00：2A:2B:FE:55:E0

00：2A:2B:FE:55:ED

00：2A:2B:FE:55:E0

00：2A:2B:FE:55:ED

2 192.168.1.6

3 192.168.1.10

4 192.168.1.12

5 192.168.1.15

6 192.168.1.18

Tip: Click the camera IP button in the available devices list to enter the add device page.

Add

Cameras in the same local network (support SriHome models with network interfaces) can be

added to the device by searching and adding. Select "Search" -> Select the camera you want to

add in the list of available devices and enter the camera password.

(Default password: 888888) Click Add to confirm.

WIFI

Method 2: Button pairing added

Method 3: Search and add

It will take about 30 seconds after the camera is powered on to complete the power-on process.

After hearing the beep, beep, and beep sounds from the camera, do the following:

(1). Click the icon in the lower left corner of the monitoring display

(2). Click "Add" on the right side of the device list, and then select "Pair"

(3). To connect, quickly press the reset button of the camera 5 times for pairing. When the camera

emits a "ding" sound, it indicates that the network configuration is successful. After successful

pairing, wait a few seconds to see the video in the preview interface.

2023-10-25 16:45:29

Index IP address Mac address type operate

Add

Set up relay wireless status

Select IPC connection method

Tip

Pair QR code

Added Device List

SriHome APP Setup

Step 1. SriHome App Installation

Method 2: Search“SriHome”on Google Play or iOS App Store.

Method 1: Scan the QR code to download “SriHome” App.

Step 2. Register & Login SriHome App

Step 3. Add the Device to App

Device

3-1

Add

N0*******

Input the device’s ID

3-2

Input device name to search device

You can scan the

QR code or input the

Device ID manually

WiFi NVR

ID: N0***********

Password: 888888

RoHS

The label is attached on

the NVR

Note: The NVR host must be connected to the Internet for the mobile APP remote

monitoring function to be used.

Android iOS

FAQ

Settings

System

Time Settings

Video Settings

Alarm Settings

Record Settings

Network Settings

Security Settings

Visitors Management

Home

1 2 3

Add share user

User authorization Visitor

Operator

Visitor

Input new user’s APP ID

User Remarks

Share User

Visitors Management

Add

FAQ1: Share the Wireless NVR to other users

To protect the user's privacy, the first user is an administrator by default. Other users

accessing the Wireless NVR need administrator permission, or they cannot login even

with ID and password. The way to get permission is as follows:

2. Access the “SriHome” App, tap Settings -> Visitor Management -> Add.

There are 2 types of permissions:

Operator:

Live video view, set time, alarm, record and network.

Visitor:

Viewing video only in real time

Note: You can find the user's App ID in

App Settings

1. Download SriHome App->Login Account->Add Camera ID

(Prompt no permission, please contact the administrator for authorization)

Click the main menu in the lower left corner >Device Maintenance >Restore Default

>Please select the default setting item you want.

FAQ3: If you forget your password, How to retrieve password

email account > Enter the key number, and your password will be displayed on the login panel.

FAQ2: If you forget who the administrator is, you can reset and

become a new administrator

CH1

CH3

CH2

CH4

+2023-10-25 16:45:29

Add IPC

General

Camera

Record

Backup Maintenance

Motion

Ring

Network

HDD

P2P

Playback

CH1

CH3

CH2

CH4

+2023-10-25 16:45:29

Add IPC

General

Camera

Record

Backup Maintenance

Motion

Ring

Network

HDD

P2P

Playback

Restore

IP address

System time

Password

Log

Other

OK Cancel

Upgrade Source USB

Mac address: 60:08:00:00:3B

Chip information: 714-W1

Series version: 6.3.17.11000000

System Upgrade

Select upgrade ﬁle

Upgrade

Restore

Reboot

Maintenance

CH1

CH3

CH2

CH4

+2023-10-25 16:45:29

Retrieve password

Random number 43501922

Retrieve password

Recovery key

Select 'Retrieve Password' and check your recovery email

account for the recovery key

CH1

CH3

CH2

CH4

+2023-10-25 16:45:29

Retrieve password

Random number 43501922

Retrieve password

Recovery key

****

Password: *******

CH1

CH3

CH2

CH4

+2023-10-25 16:45:29

Retrieve password

Random number 43501922

Retrieve password

Recovery key

Select 'Retrieve Password' and check your recovery email

account for the recovery key

CH1

CH3

CH2

CH4

+2023-10-25 16:45:29

User Name

Tips

Cancel

password

Forget Password?

admin

888888

Exit

Tip

Send successfully, please conﬁrm the recovery

key in the mobile phone mailbox.

NVR inalámbrico

Guía de operación rápida

Aplicable a NVS010

V1.0 CN202310

Español

1. Conecte el host correctamente (como se muestra a continuación)

3. Si la pantalla de prueba de la cámara se muestra normalmente, seleccione la ubicación de

instalación de la cámara de acuerdo con el canal correspondiente a la pantalla.

(Consejos: se recomienda que la ubicación de instalación tenga la menor cantidad de paredes

divisorias posible y que la señal de la red sea relativamente estable dentro de los 30 metros de la

instalación interior.)

Cámara (12V)

Fuente de alimentación NVR (12V/2A)

Enrutador

HDMI o VGA

Monitorear (opcional)

Ratón (opcional)

WiFi

CH1

CH3

CH2

CH4

+2023-10-25 16:45:29

User Name

Tips

Cancel

password

Forget Password?

admin

2. Después de encender y esperar a que se complete el inicio, verá la pantalla de la cámara en

la pantalla del host. (Contraseña de inicio de sesión predeterminada de NVR: 888888)

Instalar NVR inalámbrico

(1) Utilice el adaptador de corriente proporcionado por el fabricante para conectar

(2) Conecte el NVR al enrutador a través de un cable de red (para acceso local, omita este paso)

888888

Indice

Lingue:

Altri manuali Sricam Registratore digitale

Sricam

Sricam NVS001 Guida utente

Sricam

Sricam NVS008 Guida utente

Sricam

Sricam NVS001 Guida utente

Manuali Registratore digitale popolari di altre marche

FLIR

FLIR M3100E Series Manuale utente

VTRACKPRO

VTRACKPRO FPRO300 Manuale utente

Swann

Swann NVR-7085 models Manuale utente

XtendLan

XtendLan DVR-1670C Manuale utente

urmet domus

urmet domus 1093/004AHD Manuale utente

Holux

Holux M1 Manuale utente

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuale utente

Whistler

Whistler D16VRS Manuale utente

Defender Security

Defender Security 82-20235 Manuale utente

MISUMI

MISUMI MP-WF100M Manuale utente

Speco

Speco D8HU Manuale utente

UST

UST DDR-E04AA Istruzioni per l’uso

Consolidated

Consolidated Digital Video Recorder Manuale utente

Mace

Mace DVR0404RW Guida rapida

RCA

RCA RTD315W Manuale utente

FSM

FSM Colibri Grande PRO Manuale utente

Hauppauge

Hauppauge HD PVR 2 Manuale utente

Identivision

Identivision ICR-PH161i PIONEER Manuale utente