SSI America 8040 Manuale utente

Super Systems Inc. Page 1 SDS Data Logger Manual #4565 Rev D

Operations Manual

SDS Data Logger

MODEL SDS 8020/8040

Universal Data Logger

Please read, understand, and follow these instructions before operating this equipment.

Super Systems, Inc. is not responsible for damages incurred due to a failure to comply with these

instructions. If at any time there are questions regarding the proper use of this data logger, please

7205 Edington Drive

Cincinnati, OH 45249

513-772-0060 / 800-666-4330

Fax: 513-772-9466

www.supersystems.com

Super Systems Inc. Page 2 SDS Data Logger Manual #4565 Rev D

Table of Contents

Product Overview_____________________________________________________________________________5

Product Description________________________________________________________________________5

Product Specifications ______________________________________________________________________5

Software Installation _______________________________________________________________________6

Calibration _______________________________________________________________________________6

Getting Started____________________________________________________________________________7

Analog Inputs _____________________________________________________________________________7

Thermocouple connections _________________________________________________________________7

Voltage connections ______________________________________________________________________7

4 – 20 mA. Current Loop connections ________________________________________________________7

Survey Templates__________________________________________________________________________8

Installation_________________________________________________________________________________10

Installing the SDS Software ________________________________________________________________10

Connecting The SDS Data Logger To A Network ______________________________________________11

SDS 8020/8040 Data Logger ___________________________________________________________________13

Menu List _______________________________________________________________________________13

Keypad Assignments ______________________________________________________________________16

1. Overview Display _____________________________________________________________________17

2. Display Survey Information _____________________________________________________________17

3. Display Input Settings __________________________________________________________________18

4. Display Input Offsets __________________________________________________________________19

5. Display Logged Data___________________________________________________________________19

6. Help________________________________________________________________________________20

7. Select Input Channels __________________________________________________________________20

8. Modify Input Settings __________________________________________________________________21

9. Modify Input Offsets___________________________________________________________________22

10. Select Survey Template________________________________________________________________22

11. Battery Status _______________________________________________________________________23

12. About/Sign-On ______________________________________________________________________24

13. Revision Display _____________________________________________________________________24

14. Set Display Values ___________________________________________________________________25

15. Language/Lengua ____________________________________________________________________25

16. Quick Chart_________________________________________________________________________26

17. Overview Display Selected _____________________________________________________________26

18. Quick Chart Setup____________________________________________________________________27

19. Modify Survey Information ____________________________________________________________27

20. Set the Date and Time _________________________________________________________________28

21. Port Setup __________________________________________________________________________29

22. Input Calibration _____________________________________________________________________29

TC Type mV Range Chart ______________________________________________________________30

23. Cold Junction Trim ___________________________________________________________________31

Firmware revision 1.09 or below _________________________________________________________32

Firmware Revision 1.10 and above _______________________________________________________33

Firmware Revision 1.11 and above _______________________________________________________34

Super Systems Inc. Page 3 SDS Data Logger Manual #4565 Rev D

To Perform a Cold Junction Calibration____________________________________________________34

24. System Setup________________________________________________________________________35

25. Set Pass Codes ______________________________________________________________________36

26. Set IP Address_______________________________________________________________________36

32. Survey Deviation Alarm Log ___________________________________________________________37

34. Clear Logged Data ___________________________________________________________________37

SDS Software _______________________________________________________________________________39

SDS Reporter ____________________________________________________________________________39

File Menu Options ________________________________________________________________________39

File ÆNew / New Button_________________________________________________________________39

File ÆOpen / Open Button _______________________________________________________________40

Manually Creating a Survey Record _________________________________________________________42

File ÆSave / File ÆSave As / Save Button __________________________________________________52

File ÆExport __________________________________________________________________________52

File ÆPrint____________________________________________________________________________52

Print Button____________________________________________________________________________54

File ÆPrint Preview_____________________________________________________________________54

File ÆExit ____________________________________________________________________________54

SDS Menu Options________________________________________________________________________54

SDS ÆManage Survey Templates__________________________________________________________54

SDS ÆDownload Surveys and Data ________________________________________________________55

SDS ÆLaunch Direct FTP________________________________________________________________58

FTP Login For Access to the A Drive________________________________________________________60

SDS ÆView Real-time Data ______________________________________________________________61

SDS ÆManage Survey Records ___________________________________________________________63

SDS ÆPerform Comms Test ______________________________________________________________65

Options Menu Options ____________________________________________________________________67

Options ÆMultiple SDS Mode ____________________________________________________________67

Options ÆShow Labels On Chart __________________________________________________________67

Help Menu Options _______________________________________________________________________67

Help ÆCheck for Updates ________________________________________________________________67

Help ÆAbout__________________________________________________________________________68

SDS Data Tags ___________________________________________________________________________69

Creating a Personalized Template___________________________________________________________74

SDS Template Manager ___________________________________________________________________77

SDS Reporter Versions 1.101.0.71 and below __________________________________________________77

Description/Function of Template Manager Screen buttons/menu options _________________________77

New Button / File ÎNew ______________________________________________________________77

Open Button / File ÎOpen _____________________________________________________________78

Save Buttons / File ÎSave _____________________________________________________________79

File ÎSave As _______________________________________________________________________79

Exit Button / File ÎExit _______________________________________________________________80

Add New Template Button______________________________________________________________80

Save Changes to Template Button ________________________________________________________81

Delete Template Button ________________________________________________________________82

Description of Template Manager Screen Tabs ________________________________________________83

Template Information Tab ______________________________________________________________83

Survey Information Tab ________________________________________________________________84

Active TCs Tab ______________________________________________________________________85

Controller Information Tab _____________________________________________________________86

Super Systems Inc. Page 4 SDS Data Logger Manual #4565 Rev D

SDS Reporter Versions 1.101.0.76 and above __________________________________________________87

Description/Function of Template Manager Screen buttons/menu options _________________________87

New Button / File ÎNew ______________________________________________________________87

Open Button / File ÎOpen _____________________________________________________________87

Save Buttons / File ÎSave _____________________________________________________________88

File ÎSave As _______________________________________________________________________88

Exit Button / File ÎExit _______________________________________________________________89

Add Template Button __________________________________________________________________89

Delete Button ________________________________________________________________________89

Copy Button _________________________________________________________________________89

Arrow Buttons _______________________________________________________________________89

Description of Template Manager Screen Tabs ________________________________________________90

Template Information Tab ______________________________________________________________90

Survey Information Tab ________________________________________________________________91

Active TCs Tab ______________________________________________________________________92

Controller Information Tab _____________________________________________________________93

Description of Template Manager Screen Fields _____________________________________________94

Notes ___________________________________________________________________________________95

Appendix A – Standard Calibration Range _______________________________________________________97

Revision History_____________________________________________________________________________98

Super Systems Inc. Page 5 SDS Data Logger Manual #4565 Rev D

Product Description

You’ll find all the necessary information related to how to use the product in this manual. The product is

broken up into 2 parts, the software and hardware components. This user guide is also written in this

manor.

SDS8020 / SDS8040 provides the hardware and software needed to meet industry standards for

thermocouple uniformity by logging and generating temperature and data log reports.

It is easy to use and addresses the many industrial applications where datalogging, trending, and

reporting is required. The product is available in either the 20 or 40-channel version with user-defined

inputs for each channel.

The easy to use Survey Template and Report Manager provides users with all the necessary tools to

generate uniformity reports. The Report Manager includes a report writer that allows the user to setup

reports to meet their specific requirements. The Template Manager allows survey specific data to be

created, updated and used during the reporting process. All reports can be printed, saved electronically

and emailed using the software utilities. The SDS software tools along with the data logger, combine to

create a powerful solution for data logging and reporting temperature uniformity surveys.

Product Specifications

•User defined “logging” intervals as frequently as 10 seconds

•Isolated inputs

•AC ( 90 – 240 V) and DC Power

•Rechargeable battery – Approximately 12 hours of “runtime”

•Dimensions: 16”D X 20”L X 8”H

•Password protected menu options

•Easy calibration

•Web-page enabled real-time view

•ETHERNET and RS232 serial communications

•16-Bit A/D converter

•128 Mbytes of on-board data

Super Systems Inc. Page 6 SDS Data Logger Manual #4565 Rev D

Degrees F. A/D Accuracy Accuracy Accuracy

TC Type Min Max Full scale Full Scale At 1600 Degrees F.

At 1600 Degrees F with

thermister error

B 32 3308 0.0124% 0.0179% 0.29 0.65

C 32 4208 0.0062% 0.0067% 0.11 0.47

E -328 1832 0.0031% 0.0032% 0.05 0.41

J -346 2192 0.0031% 0.0036% 0.06 0.42

K -328 2502 0.0031% 0.0045% 0.07 0.43

N -328 2372 0.0031% 0.0052% 0.08 0.44

NNM 0 1409 0.0031% 0.0033% 0.05 0.41

R -58 3214 0.0062% 0.0118% 0.19 0.66

S -58 3214 0.0124% 0.0133% 0.21 0.57

T -328 752 0.0062% 0.0119% 0.19 0.55

*** Note: Accuracy at 1600 Degrees F with thermister error requires SDS firmware level 1.10 or later ***

Software Installation

You will find the SDS Recorder software CD that ships with the unit includes all the reporting and

administrative utilities. Insert the CD into the CD ROM device on your computer and click the setup.exe

file. You will be given a step-by-step instruction for completing the installation process. See

Installing the

SDS Software

section for more details.

Calibration

The SDS data logger is calibrated prior to shipment. The

calibration process is available through menu option 22 on the

data logger. Instructions for calibration are included in this

manual. Super Systems calibrates the SDS data logger using

NIST traceable instruments that are listed on the calibration

certificate included with the device. The default calibration is

performed using a zero and span routine for the millivolt range of

0 – 80mV. Each range that is being used should be calibrated.

For a list of suggested mV ranges by thermocouple types, please

refer to the section on Input Calibration in the manual. Other

calibration ranges are available upon request.

An input device will be used to input a specific type K

thermocouple value and the data logger value will be recorded.

This will be performed at different temperatures and printed with the certificate.

Super Systems Inc. Page 7 SDS Data Logger Manual #4565 Rev D

Getting Started

When logging data, the operator will use the on-board display to start and stop the data logging / survey

process. The first steps related to data logging are connecting the inputs to the terminal strips on the

data logger. Each terminal strip represents a single analog board with 5 inputs. You can remove these

terminal strips by pulling up on both ends of the terminal strip.

Depending on the model number, you have either 20 or 40 input channels for data logging. For each

channel there will be a positive and negative connection which must be attached to the appropriate input.

The operator defines an input type for each channel. This is performed through menu option 8 (

Modify

Input Settings

) on the data logger.

Once the inputs have been connected, the operator

selects which inputs will be included in the survey.

This is done in 2 ways. The template provides

operators with input selection but can be updated on

the data logger using the

Select Input Channel

option.

When a template has been selected, the input

channels setup for the template, as defined in the

Template Manager, will be the selected channels for

the survey. As mentioned, this can be updated using menu option 7

Select Input Channel

. Always

select a template prior to running a survey. If you want to create new templates, please see

section

SDS Template Manager

Analog Inputs

The Super Systems, Inc. 31541 Analog Board contains a group of five channels isolated from the main

DC power source. The board can be connected to thermocouples, voltage sources from 20mV full scale to

1.28 Volts full scale, or 4 – 20 mA current loops.

Thermocouple connections

Thermocouple wires can be connected directly to the terminal blocks. The thermocouple junctions should

not be grounded. If they do touch a ground reference, all thermocouples on a board must have a

common ground reference. If multiple thermocouples are connected to different ground reference points,

the accuracy of all thermocouples on the board cannot be guaranteed to be accurate.

Voltage connections

Voltages from 0 mV to 1.28 Volts can be directly connected to the terminal blocks. When measuring

ground-referenced voltages, all references must share a common ground reference. If the voltage

sources are connected to different ground reference points, the accuracy of all the voltage sources

connected to the board need to be checked for accuracy.

4 – 20 mA. Current Loop connections

Before connecting the current loop, insert the shorting jumper on the board for each channel used to

measure current loops. This jumper inserts the 62-ohm shunt resistor across the input of the A/D. If

multiple current loops are connected to one board, all must share the same power supply and ground

reference points or the accuracy of all the current loops need to be checked for accuracy.

Super Systems Inc. Page 8 SDS Data Logger Manual #4565 Rev D

Survey Templates

The data logger will default to the last survey template used. To modify the template being used, the

operator can go to the

Select Survey Template

option. This data will be carried over for the reporting

process to make the reporting quick and easy. On the

Survey Template screen there are parameters that can

be modified for a specific survey such as setpoint.

After setting the required parameters, the start survey

process can be selected. This will timestamp the

selection and the data logger will log all channels that have been selected for logging.

The operator may receive deviation alarms depending on the

current input and setpoint as well as the alarm settings. The

alarm will notify the operator when an input is outside the

plus/minus tolerance for the setpoint. The alarm information

will display on the data logger and show the number of

channels above tolerance and below the tolerance. The

survey continues to run, it is simply providing the operator

with the information on the display.

The operator can view the input channel data on a number of

different screens. The

overview display

will display all

channels on the device but by using the circular arrow key,

, the operator views the

overview display

with only the

“selected” input channels. By pressing the circular arrow key

again, the operator will get the

Quick Chart View

screen

displaying trend data for a specific channel.

At anytime, the operator can view the data in real-time from

the computer using the SDS Recorder software. The real-time

data option when selected displays the data every 10 seconds. The system will update 10-second

intervals every minute. Follow instructions for connecting the datalogger to the PC.

The survey can be stopped from the

Display Survey

Information

screen. On the Action option, entering a “0” and pressing the

Enter key will stop the survey.

After stopping the survey, other surveys can be taken by

repeating the above steps. At anytime, all survey data can be

downloaded to the PC using the Download Surveys And Data

option on SDS Recorder. Follow instructions for

connecting the datalogger to the PC.

Once the data has been downloaded, it is available

for reporting. By clicking on the file open menu

option, the operator will be given the Report dialog

to generate a survey report. Reports use logged

data and the user specified interval in the report.

The report template selected will form the final

report view with all the template data, survey data

and additional report parameters that are entered.

Super Systems Inc. Page 9 SDS Data Logger Manual #4565 Rev D

The report templates are user defined and should be configured to meet your needs. All reports can be

saved and displayed at a later date.

Super Systems Inc. Page 10 SDS Data Logger Manual #4565 Rev D

Installing the SDS Software

Note – The person installing the SDS Software must have administrative rights on the

computer(s) where the installation is taking place for the installation to be successful.

Double-click on the setup file, SDSSetup.msi to start the auto-installation. If there is no version of the

SDS Reporter running on the computer, the installation will prompt the user for the download location

(figure 1.1).

Figure 1.1 SDS Reporter setup screen

The default location is “C:\SSI\SDS”. Click on the “Browse” button to select an alternate location.

Clicking on the “Disk Cost…” button will display the available computer drives onto which the SDS

Reporter can be downloaded, as well as the total space, available space, and required space for each

drive. Selecting the “Everyone” option will install the SDS Reporter for all users on the computer, while

selecting the “Just me” option will only install the SDSReporter for the current user. Clicking on the

“Cancel” button will prompt the user to confirm exiting the setup without continuing. Clicking on the “<

Back” button will display the previous screen, which is the introduction screen for the installer. Clicking

the “Next >” button will continue with the installation process (figure 1.2).

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Registratore di dati popolari di altre marche

TESTO

TESTO 176 Manuale utente

HT Italia

HT Italia XL421 Manuale utente

HBM

HBM SOMAT XR CX22B-R Manuale utente

Agtrix

Agtrix 380i Manuale utente

Hobo

Hobo H8 Pro Manuale utente

Beijing ART Tech

Beijing ART Tech PCI2320 Manuale utente

Athena

Athena GET SL1 Manuale utente

Motec Systems

Motec Systems C185 Manuale utente

Beijing ART Tech

Beijing ART Tech USB2832 Manuale utente

Rotronic

Rotronic HygroLog HL20 Manuale utente

MRC

MRC DW-6092 Manuale utente

Racelogic

Racelogic VBOX LapTimer Manuale utente

Edu-Logger

Edu-Logger 900-240 Manuale utente

Elma

Elma DT173 Manuale utente

MadgeTech

MadgeTech PRTemp140 Scheda tecnica

Comet

Comet U0121M Manuale utente

pico Technology

pico Technology PT-104 Manuale utente

Soil Instruments

Soil Instruments GTecLink Manuale utente