US-CMP65
Universal Cage Mount
6.5” Speaker Enclosures
SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751
!
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in
material or workmanship. All SSV Works Electronics are covered by a limited 1 year
warranty against defects in material or workmanship. Labor for replacement of defective
components is not covered. All SSV Works Speakers are covered by a limited 1 year
warranty against defects in material or workmanship. Contact SSV Works for further
warranty information.
1. US-CMP65 Enclosures (1 pair)
2. M6 x 1.0 Screws x 4
3. M6 Washers x 4
4. Mounting Disc x 2
5. 1/2” Allen Screw x 4
TOOLS NEEDED FOR INSTALLATION PARTS LIST
PARTS LIST IMAGES
6. Clamp Base x2
7. Mounting Clamp x 2
8. 1 - 3/4” Allen Socket
Head x 2
9. 5/16” Nut x 2
2. M6 x 1.0 Screws x 4
1. US-CMP65 Enclosures
(1 pair)
6. Clamp Base x2 7. Mounting Clamp x 2 8. 1 - 3/4” Allen Socket
Head and Washer x 2
6. 5/16” Nut x 2
5. 1/2” Allen Screw x 43. M6 Washers x 4 4. Mounting Disc x 2
- Wire Crimpers
- Wire Strippers
- 4mm and 5mm Allen
Wrench
- Drill with 1/4” Drill bit
- #3 Phillips Screwdriver
- Scribe or Marker
INSTALLATION NOTES
The use of a thread locker is recommended on all screws to prevent loosening due to vibration. It is recommended to wrap the bag that the clamps
come in around the cage before you slide the clamp onto the cage, this will prevent scratching.
