Remote Maintenance Gateway RMG/941C(L,N) – Hardware Reference
D o c u m e n t R e v i s i o n 1 . 0
1 INTRODUCTION
This document describes the basic hardware components of the Remote Maintenance
Gateway RMG/941C(L, ).
1.1 Safety Guidelines
Please read the following safety guidelines carefully! In case of property or personal
damage by not paying attention to this manual and/or by incorrect handling, we do not
assume liability. In such cases any warranty claim expires.
• The power supply should be in immediate proximity to the device.
• The power supply must provide a stable output voltage at 12..24 VDC ±10%. The
output power should be at least 10 W.
• Please pay attention that the power cord or other cables are not squeezed or dam-
aged in any way when you set up the device.
• Do OT turn on the power supply while connecting any cables, especially the pow-
er cables. This could cause damaged device components! First connect the cables
and THE turn the power supply on.
• The installation of the device should be done only by qualified personnel.
• Discharge yourself electrostatic before you work with the device, e.g. by touching a
heater of metal, to avoid damages.
• Stay grounded while working with the device to avoid damage through electrostat-
ic discharge.
• The case of the device should be opened only by qualified personnel.
1.2 Conventions
Important terms and information
Filenames, Pathnames, program code, command lines
Table 1: onventions used in this document
