Element-MF Stove
4
GENERAL INFORMATION
SAFETY PRECAUTIONS
SAFETY NOTICE: The Element-MF must be properly installed in order to prevent the
possibility of a house fire! These installation instructions must be strictly observed! The
Maintenance schedule must be followed as described in this manual. Failure to follow
instructions may result in property damage, bodily injury or even death.
The Element-MF’s exhaust system works with negative combustion chamber pressure and a
slightly positive chimney pressure. Therefore, it is imperative that the air intake and exhaust
system be airtight and installed correctly. Do not install a flue damper in the exhaust vent of this
unit.
Do not connect this unit to a chimney flue serving another appliance.
BUILDING PERMIT
CONTACT THE LOCAL BUILDING OFFICIALS TO OBTAIN A PERMIT AND
INFORMATION ON ANY LOCAL INSTALLATION RESTRICTIONS AND
INSPECTION REQUIREMENTS.
DEFINITION OF “MULTI-FUEL STOVE”
The word “Multi-Fuel Stove” as used in this manual is interpreted to mean a corn, wheat, rye
Distillers Grain pellets, Cherry pits or wood pellet burning Multi-Fuel Stove. This model is not
intended as the sole source of heat.
SAFETY TESTING
The Element-MF has been independently tested and listed by Warnock Hersey Laboratories in
accordance with the proposed ASTM E 1509-2004 Standards and the applicable portions of UL
1482 and ULC S627/B366.2, and Oregon Administrative Rules 814-23-901 through 814-23-
909, stating requirements for installation the Element-MF and for mobile home installations. The
safety-listing label is located on the back of the unit. Please refer to label for pertinent
information.
DISCLAIMER OF WARRANTY
Since Even Temp Company has no control over the installation of the Element-MF, Even Temp
Company grants no warranty, implied or stated, for the installation of the Element-MF and
assumes no responsibility for any special, incidental or consequential damages.
MANUFACTURED BY:
Even Temp Inc
Hwy 34
Waco, NE, 68467
Save This Installation & Operations Manual
