Staco Energy Tower 1KVA Manuale utente

Tower

1KVA/2KVA/3KVA

True On Line Double Conversion UPS

User’s Manual

003-2299 Rev A 12/20/2007

ISE, Inc

10100 Royalton Rd.

Cleveland, OH 44133

Tel: (440) 237-3200

Fax: (440) 237-1744 http://iseinc.com

Table of Contents

Important Safety Instructions

An Important Notice -----------------------------------------------------2

W a r n i n g ---------------------------------------------------------------3

1. Product Introduction

1.1. The General Characteristics-------------------------------------------------------4

1.2. The Advanced Technical Characteristics --------------------------5

2. Introduction to the Front and Rear Panel

2.1. Front Display Panel Explanation-----------------------------------------------6

2.2. Rear Panel Explanation----------------------------------------------------------8

2.2.1.General Explanation-----------------------------------------------------------8

2.3. Communication Port Explanation--------------------------------------------10

3. Installation and Operation

3.1. Unpack ing-----------------------------------------------------------11

3.2. Selecting Installation Position ---------------------------------- 11

3.3. Operation T est and Installation Instruction -----------------12

3.4. Storage Instruction------------------------------------------------13

3.5. SNMP Slot ----------------------------------------------------------13

4. UPS Working Principle

4.1. When Utility is Normal------------------------------------------------------16

4.2. W hen Utility is Abnormal-----------------------------------------16

4.3. Overload Condition--------------------------------------------------17

4.4. Inverter Is out of Order-------------------------------------------18

4.5. Inverter Over Tem perature---------------------------------------18

4.6. Inverter Over-current and Inverter Output Voltage Out of Window------18

5. Troubleshooting & Maintenance Guide

5.1. System Block Diagram----------------------------------------------------------19

5.2. Troubleshooting-------------------------------------------------------------------19

5.3. Maintenance-----------------------------------------------------------------------20

6. Bundled Software Installation Guide

6.1. Hardware Installation--------------------------------------------------------------21

6.2. Software Installation---------------------------------------------------------------21

Appendix

A.1.Specification------------------------------------------------------------24

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

This manual contains important instructions that should be followed during

installation and maintenance of the UPS and batteries.

An Important Notice

To ensure safety in all applications where a UPS is hard wired to the

electrical supply, ensure that the system is installed by a qualified electrical

contractor.

Those UPS systems supplied with a factory input lead can be safely

connected to the wall socket by the purchaser.

The UPS has its own internal energy source (battery). Should the battery be

switched on when no AC power is available, there could be voltage at the

output terminals.

Make sure that the AC Utility outlet is correctly grounded.

Do not open the case as there are no serviceable parts inside. Your

warranty will be void.

Do not try to repair the unit yourself, contact your local supplier or your

warranty will be void.

Please make sure that the input voltage of the UPS matches the supply

voltage.

Use a certified input power cable with the correct plugs and sockets for the

appropriate voltage system.

To eliminate any overheating of the UPS, keep all ventilation openings free

from obstruction, and do not store "things" on top of the UPS. Keep the UPS

20 cm away from the wall.

Make sure the UPS is installed within the proper environment as specified.

(0-40 C and 30-90% non-condensing humidity)

Do not install the UPS in direct sunlight. Your warranty may be void if the

batteries fail.

Install the UPS indoors as it is not designed for installation outdoors.

Dusty, corrosive and salty environments can do damage to any UPS.

Install the UPS away from objects which give off excessive heat and areas

which are excessively wet.

If liquids are split onto the UPS or foreign objects dropped into the unit, the

warranty will be null and void.

The battery will discharge naturally if the system is unused for any length of

time.

It should be recharged every 2-3 months if unused. If this is not done, then

the warranty will be null and void. When installed and being used, the

batteries will be automatically recharged and kept in top condition.

This UPS supports electronic equipment in offices, telecommunications, and

process control, medical and security applications.

This UPS has been designed and constructed to protect your assets from the

wide range of power aberrations experienced on Utility power lines today. It

is your insurance for reliable, clean and stable voltage supply. It is worth

taking care to install the system correctly and to have it maintained correctly

by your local distributor.

WARNING:

This is a Class A-UPS product. In a domestic environment,

This product may cause radio interference, in which case,

The user may be required to take additional measures.

Intended for installation in a controlled environment.

Servicing of batteries should be performed or supervised by personnel

knowledgeable of batteries and the required precautions. Keep unauthorized

personnel away from batteries.

When replacing batteries, replace with the same number and type.

CAUTION – Do not dispose of battery or batteries in a fire. The battery may

explode.

CAUTION – Do not open or mutilate the battery or batteries. Released

electrolyte is harmful to the skin and eyes. It may be toxic.

CAUTION – Risk of electric shock – battery circuit is not isolated from ac,

hazardous voltage may exist between battery terminals and ground. Test

before touching.

CAUTION – A Battery can present a risk of electrical shock and high short

circuit current. The following precaution should be observed when

working on batteries:

a. Remove watches, rings, or other metal objects.

b. Use tools with insulated handles.

c. Wear rubber gloves and boots.

d. Do not lay tools or metal parts on top of batteries.

e. Disconnect charging source prior to connecting or disconnecting

battery terminals.

CAUTION – To reduce the risk of fire, connect only to a circuit provided with

20 amperes maximum branch circuit over current protection in accordance

with the National Electric Code, ANSI/NFPA 70.(1K/2K)

CAUTION – To reduce the risk of fire, connect only to a circuit provided with

30 amperes maximum branch circuit over current protection in accordance

with the National Electric Code, ANSI/NFPA 70. (3K)

Chapter One: Product Introduction

1.1. The General Characteristics

True online architecture continuously supplies in your critical device with

a stable, regulated, transient-free pure sine-wave AC Power.

50 KHz PWM sine-wave topology yields an excellent overall performance.

The high crest factor of the inverter handles all high-inrush current

loads without a need to upgrade the power rating.

To protect the unit from overloading, it automatically switches to bypass mode

in case loading exceeds 120% of rating. It will automatically switch back to

inverter mode once overload condition ceases.

Should the output becomes short-circuited, the UPS holds the system

and cuts the output automatically till the short circuit situation is removed.

Should the unit become overheated, the internal thermistor will detect

the heat and switch to bypass mode and vice versa.

Maintenance-free sealed-type battery minimizes after-sales service.

1.2. The Advanced Technical Characteristics

 Market leading light and compact design for modern OA environment and

OEM flexibility.

 Powerful CPU integrates all power stages, control and communication

functions necessary for maximized UPS protection and functionality, including

power management status monitoring, configuration setting operation

scheduling, remote control and self-diagnosis.

 Slick CPU communication design allows full function remote control from any

computer environment via standard RS-232 interface using Megatec’s

RUPSII protocol.

 State-of-the-Art IGBT Technology and Industrial Grade quality ensures

highest efficiency and reliability under worst operating condition.

 Industry leading inverter protection technology incorporates 2-stage output

current sensor, smart overload output current control, improved crest factor,

and feedback failure proof circuit, elevating the availability of power service.

 Guarantees an exclusive protection against DC damage for inductive load,

such as motor based devices, entirely eliminating application limitation.

 Advanced Input PFC control guarantees the PF performance and maximum

energy efficiency.

 Unique electronic over-current protection detects output short-circuit and

faults, and halts output before damages done to output fuse or equipment,

thereby minimizing the need for service.

 Expanded input voltage working range minimizes battery usage and

enhances battery utilization and life.

 Automatic Frequency Sensor reduces headache in frequency shift.

 DC-start function makes sure of the start-up of UPS during power outages.

 On-demand self-diagnosis function ensures UPS reliability and availability.

 Built-in supplementary charger enables speediest charging of external battery

bank.

 SNMP adapter slot represents the advanced upgrade solution to achieve

direct power management via the internet world-wide.

 User's adjustable Output DIP switches allow you to select an accommodate

output voltage for your critical device.

Chapter Two: Introduction to the Front and Rear Panel

2.1. Front Display Panel Explanation

2Kva1Kva 3Kva

Main Switch

This is control the on/off of the UPS

Self Test OK LED

Green LED lights up if self test is O.K.

Test/Silence

a. To silence alarm by pressing the button.

b.1.For Standard Unit

To execute the self test of the UPS by pressing

the button over 10 sec.

b.2.For Unit with Manual Bypass function (Special

order required)

To press the button over 5 seconds, the UPS will

be switched to Bypass mode and vice versa.

c. To illustrate the percentage of output load level at

AC Mode, and the battery energy level at Backup

Mode by pressing the button.

Fault LED

Red LED lights up if UPS is faulty.

Bypass LED

Amber LED lights up when UPS is in Bypass mode.

Utility LED

a. AC normal: Green LED lights up.

b. 100% for load & battery level

Inverter LED

a. Inverter On: Green LED lights up

b. 75% for load & battery level.

Battery low LED

a. Battery low : Red LED lights up

b. 50% for load & battery level

Over load LED

a. Over load condition: Red LED lights up

b. 25% for load & battery level.

2.2. Rear Panel Explanation

2.2.1 General Explanation

a) 120Vac

b) 230Vac

1Kva 2Kva 3Kva

AC Inlet

For 120Vac

System

This is to be connected with an AC power cord for plugging

into the wall receptacle.

1Kva

2Kva

3Kva

5-15P

5-20P

L5-30P

For 230Vac

System

1Kva

2Kva

3Kva

IEC 320

AC Input

Fuse/

Breaker

This is to disconnect line input to protect application from

Output overload or short circuit.

Fuse/Breaker Rating for 120Vac/230Vac systems

1Kva

2Kva

3Kva

120Vac: 20A/250V

230Vac: 10A/250V

120Vac: 25A/250V

230Vac: 20A/250V

120Vac: 50A/250V

230Vac: 25A/250V

External

Battery

Terminal

This is a battery terminal to be connected with additional

battery banks for longer backup time purpose. Only a

qualified technician is permitted to proceed with the

installation.

AC Outlet

For 120Vac

System

This is to be plugged by the devices being protected by the

UPS.

Socket type

1Kva

2Kva

3Kva

NEMA

5-15R

4ea

6ea

NEMA

5-20R

N/A

2ea

For 230Vac

System

Socket Type

1Kva

2Kva

3Kva

IEC 320

4ea

6ea

SNMP Slot

It is an optional feature used for SNMP card. Please Refer to

Chapter 3.5 for hardware installation.

Comm Port

This is an interface to send signals to and receive signals

from the computer. An optional computer software may be

required. Please refer to Chapter 2.3 for its pin

assignments.

RJ11/RJ45

Jack

Noise suppression is provided for modem (RJ11) or 10-Base

T Network (RJ45) devices

DIP

Switches

For Calibration.

AC Output

Breaker

Rating

1Kva

2Kva

3Kva

120Vac

N/A

15A-NEMA5-15R

20A-NEMA5-20R

230Vac

N/A

10A

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Staco Energy UPS

Staco Energy

Staco Energy FLU-160-00 Manuale utente

Staco Energy

Staco Energy SC60021RM Manuale utente

Staco Energy

Staco Energy E2 Manuale utente

Staco Energy

Staco Energy Unistar V Manuale utente

Staco Energy

Staco Energy 924 Manuale utente

Staco Energy

Staco Energy Unistar VP Manuale utente

Staco Energy

Staco Energy FirstLine Manuale utente

Staco Energy

Staco Energy UniStar SB2 Series Manuale utente

Staco Energy

Staco Energy UniStar C Manuale utente

Staco Energy

Staco Energy FirstLine P Manuale utente

Staco Energy

Staco Energy FLP-10-POPC-5-R-4Y-2Y Manuale utente

Staco Energy

Staco Energy SB Series Manuale utente

Staco Energy

Staco Energy FLP-BAT-080-150-2-B-30K Manuale utente

Staco Energy

Staco Energy SCV-10001 Manuale utente

Staco Energy

Staco Energy FirstLine P Manuale utente

Staco Energy

Staco Energy E2 Manuale utente

Staco Energy

Staco Energy SB-04001 Manuale utente

Staco Energy

Staco Energy E2 Manuale utente

Staco Energy

Staco Energy SC60021T Manuale utente

Staco Energy

Staco Energy Unistar V Manuale utente

Manuali UPS popolari di altre marche

Pylontech

Pylontech Victron & Pylontech US5000 Manuale utente

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuale utente

Mecer

Mecer ME-1000-WTU Manuale utente

Mustek

Mustek PowerMust 530(B) Plus Manuale di installazione e funzionamento

Emerson

Emerson Liebert NXL series Manuale utente

MAKELSAN

MAKELSAN BOXER SERIES Manuale utente

Block

Block PC-0524-400-0 Manuale utente

CyberPower

CyberPower CP585LCD Manuale utente

Eaton

Eaton 3S Istruzioni per il montaggio

CyberPower

CyberPower Office Tower Series UPS 1000 Manuale utente

CyberPower

CyberPower BM100 Manuale utente

Best Power

Best Power 610 Manuale utente

Best Power

Best Power Unity/I UT3K Manuale utente

Mustek

Mustek PowerMust 400 Offline Manuale utente

Xantrex

Xantrex Trace 512 UR-UPS Manuale utente

Forza

Forza SL-1501UL Manuale utente

LEGRAND

LEGRAND keor 310081 Manuale utente

ABB

ABB Conceptpower DPA 500 Manuale utente