(0.4”) MAX ELEVATION! If you cannot lift the platform without
exceeding the 5 bar max pressure your equipment is way above the
max allowable load.
BASIC PLATFORM: The section on the left side of the platform
(looking from the switches' side) controlled by the leftmost switch will
need to be pumped to a higher pressure than the other two sections. For
that switch the other two sections off after they have reached the desired
elevation (put the central and the rightmost switches down) and
continue pumping until the left side of the platform reaches the same
elevation as the right one. The manometer will read a higher pressure
which is normal. The important is an approximate level of the platform
(uniform elevation at all 4 corners).
NOTE: The optimal platform elevation for a vast majority of the
equipment is 3-5mm. This represents the best trade-off between the
soni performan e and the need for frequent pressure orre tions.
6. Put all the switches down. This is the “CLOSED” position. Disconnect
the pump.
7. If you want to check the pressure in any of the sections open the
