Stadium USBMIC1 Manuale utente
OFF
ON
USBMIC1 User Manual
Cardioid Condenser USB Microphone
Contents
Preliminary setup with Mac OS X2
Preliminary setup with Windows XP4
Preliminary setup with Windows Vista7
Preliminary setup with Windows 7/108
Additional Information11
Specifications & Technical Assistance12
2
1. Plug the free end of the provided USB cable into the USB port on your computer.
Your computer will automatically recognize the USB device and install a driver.
2. System Preferences.
Preliminary setup with Mac OS X
Note: Many recording software programs are available online. Audacity is widely used free software
for recording and editing sounds. It is available online at http://audacity.sourceforge.net/
3
USBMIC1 USB
3. Next, click Sound to display the Sound preference pane.
4. Click the Input tab and select the USBMIC1 as the device for sound input.
Your preferences are now set to use the USBMIC1 on your Mac with GarageBand or another
recording program of your choice.
Preliminary setup with Mac OS X (continued)
4
(Service Pack 2; other operating systems may vary slightly)
1. Plug the free end of the USB cable into the USB port on your computer.
Your computer will automatically recognize the USB device and install a driver.
2.
In the lower right portion of your screen you may see a message that new hardware was found;
or you may see a driver software installation notice.
3. To select the USBMIC1 as your default recording device, begin at your Start menu.
Select Control Panel.
Preliminary setup with Windows XP
5
4. Select Sounds and Audio Devices .
Preliminary setup with Windows XP (continued)
6
5. Select the Audio tab, and choose USBMIC1 as the default device.
6. Adjust computer volume by clicking on the Volume button beneath Sound recording Default device.
Preliminary setup with Windows XP (continued)
USBMIC1
7. Through the Wave In window, you can set the computer volume or mute the microphone.
Your preferences are now set to use the USBMIC1 with Windows XP with the recording program
of your choice.
USBMIC1
7
Microphone
USBMIC1 Mic
Working
Microphone
SigmaTel C-Major Audio
Working
Preliminary setup with Windows Vista
1.
Plug the free end of the USB cable into the USB port on your computer.
Your computer will automatically recognize the USB device and install a driver.
2.
In the lower right portion of your screen you may see a message that new hardware was found;
or you may see a driver software installation notice.
3. To select the USBMIC1 as your default recording device, begin at your Start menu.
Select Control Panel.
4. Select (double-click) Sound.
5. Select the Recording tab. Make sure that the USBMIC1 microphone is set as the default
Your preferences are now set to use the USBMIC1 with Windows Vista with the recording
program of your choice.
recording device. (You should see a green check mark beside the USB microphone icon.)
8
1. Plug the free end of the USB cable into the USB port on your computer.
Your computer will automatically recognize the USB device and install a driver.
2.
In the lower right portion of your screen you may get a message that new hardware was found;
or you may see a driver software installation notice.
3. Start menu > Control Panel > Sound
To select the USBMIC1 as your default recording device, begin at your Start menu.
Select Control Panel .
Preliminary setup with Windows 7/10
9
4. Select Sound .
5.
Preliminary setup with Windows 7/10 (continued)
The following screen will pop up:
10
6. Select the Recording tab, and choose USBMIC1 as the default device.
7. Double click on the USBMIC1 icon to open the Microphone Properties window. Select the
levels tab to adjust microphone level (loudness). You may need to come back to this window to
readjust the level after you begin recording.
Preliminary setup with Windows 7/10 (continued)
Your preferences are now set to use the USBMIC1 with Windows 7/10 with the recording program
of your choice.
Microphone
USBMIC1-Mic
Default Device
Indice
Altri manuali Stadium Microfono
