Stage Ape Lighting PSYCHO Manuale utente
PSYCHO Instructions
LED DMX Crystal Ball with red, blue and green beams...
6 x 1 watt LED’s
Modes include: 6 channel DMX, master/slave, multiple auto and sound modes with 9 speed
options for each mode.
Automatic mode: A1- red LED’s on, A2- green LED’s on, A3- blue LED’s on, A4- RGB color
change, A5- RGB color mix, A6- RGB color fade in/out, A7- RGB strobing, A8- mix of all
modes
Sound active mode: S1- strobe to sound, S2- color change an strobe to sound
9 LED rotation speeds can be controlled and set for each auto mode function. Low heat,
low power consumption (10W) and can run all night.
Unit size 7" x 7" x 6.5" weight 2 Lbs.
Instructions for Operation:
Auto/Sound Modes:
Press the mode button until A# appears on the LED display.
A1- RED LED’s on
A2- GREEN LED’s on
A3- BLUE LED’s on
A4- RGB color change
A5- RGB color mix
A6- RGB color fade in/out
A7- RGB strobing
A8- Mix of all modes
S1- Strobe to sound
S2- Color change and strobe to sound
After you have found the correct mode use the up and down buttons to select the
rotation speed from 1-9.
DMX Mode:
Press the mode button until the LED display reads A###. Then press the up and down
buttons to set the fixture's DMX value.
Channel 1 0-249 Strobe (0-183 is slow to fast and 184-249 is slow to fast),
250-255 ON
Channel 2 0-255 controls RED LED's
Channel 3 0-255 controls GREEN LED's
Channel 4 0-255 controls BLUE LED's
Channel 5 0-255 controls the speed of the rotation (slow to fast)
Channel 6 0-37 RED LED's (at medium rotation speed)
38-65 GREEN LED's (at medium rotation speed)
66-93 BLUE LED's (at medium rotation speed)
94-121 cycles through red, green and blue LED's with only 1 color on at a time
(at medium rotation speed)
122-150 cycles through combinations of red, green and blue (at medium rotation
speed)
151-177 cycles through RGB combinations fading in and out (at medium rotation
speed)
178-210 fast strobe through color combinations (at medium rotation speed)
211-233 cycles through combinations of RGB witch some fast strobing (different
than above, at medium rotation speed, looks like it could be an auto
mode)
234-255 Nothing
Master/Slave Mode:
Set the first fixture to any auto or sound active mode. Connect the second fixture to the
first using a DMX cable. Use the mode button to set the second fixture to DMX mode
A001. The units will then start doing the same thing.
Indice
Altri manuali Stage Ape Lighting Attrezzatura per DJ
