Stamina 1773 Manuale utente

Model#: 55-1773

STAMINA PRODUCTS

MADE IN CHINA

Product May Vary Slightly

From Pictured.

2009, 08

Exercise can present a health

risk. Consult a physician

before beginninganyexercise

program with this equipment.

If you feel faint or dizzy,

immediately discontinue use

of this equipment. Serious

bodily injury can occur if this

equipment is not assembled

and used correctly. Serious

bodily injury can also occur if

all instructions are not

followed. Keep others and

pets away from equipment

when in use. Always make

sure all bolts and nuts are

securely tightened prior to

each use. Follow all safety

instructions in this manual.

When calling for parts or

service, please specify the

following number.

WARNING

CAUTION:

Weight on this product should not exceed 250 lbs.

2009 Stamina Products, Inc.

Owner's

Manual

2040 N. Alliance, Springfield, MO 65803

Customer Service

1 (800) 375-7520

www.staminaproducts.com

This Product is Produced Exclusively by

TABLE OF CONTENTS

Safety Instructions 2

Before You Begin 4

Equipment Warning & Notice Labels 5

Hardware Identification Chart 6

Assembly Instructions 7

Set Up Instructions 12

Operational Instructions 13

Storage 15

Maintenance 15

Conditioning Guidelines 16

Warm-Up and Cool-Down 17

Product Parts Drawing 18

Parts List 19

Warranty 21

Notes 22

Fax/Mail Ordering Form 23

Page Page

SAFETY INSTRUCTIONS

To reduce the risk of serious injury, read the following Safety Instructions before

using the Magnetic 1773 Elliptical.

WARNING:

Before starting any exercise or conditioning program you should consult with your personal

physician to see if you require a complete physical exam.This is especially important if you

are over the age of 35, have never exercised before, are pregnant, or suffer from any

illness. READ AND FOLLOW THE SAFETY PRECAUTIONS. FAILURE TO FOLLOW

THESE INSTRUCTIONS CAN RESULT IN SERIOUS BODILY INJURY.

WARNING:

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

Read all warnings posted on the Magnetic 1773 Elliptical.

The Magnetic 1773 Elliptical should only be used after a thorough review of the Owner's Manual.

We recommend that two people be available for assembly of this product.

Keep children away from the Magnetic 1773 Elliptical. Do not allow children to use or play on the

Magnetic 1773 Elliptical. Keep children and pets away from the Magnetic 1773 Elliptical when it is

in use.

Make sure the Magnetic 1773 Elliptical is properly assembled and that all nuts and bolts are

tightened before use.

It is recommended that you place this exercise equipment on an equipment mat.

SetupandoperatetheMagnetic 1773 Elliptical onasolidlevel surface.DonotpositiontheMagnetic

1773 Elliptical on loose rugs or uneven surfaces.

Make sure that adequate space is available for access to and around the Magnetic 1773 Elliptical.

Adjustthe LEVELINGCAPS onthe REARSTABILIZERsothatthe bikesitsonthe floorwithout rocking.

Before using, inspect the Magnetic 1773 Elliptical for worn or loose components, and securely

tighten or replace any loose or worn components prior to use.

Consult a physician prior to commencing an exercise program and follow his/her recommendations

in developing your fitness program. If at any time during exercise you feel faint, dizzy, or experience

pain, stop and consult your physician.

Follow your physician's recommendations in developing your own personal fitness program.

Always choose the workout which best fits your physical strength and flexibility level. Know your

limits and train within them. Always use common sense when exercising.

Do not wear loose or dangling clothing while using the Magnetic 1773 Elliptical.

Never exercise in bare feet or socks; always wear proper footwear such as running, walking, or

cross training shoes that fit well, provide foot support, and feature non-skid rubber soles.

Care should be taken in mounting or dismounting the Magnetic 1773 Elliptical.

The Magnetic 1773 Elliptical should not be used by persons weighing over 250 pounds.

The Magnetic 1773 Elliptical should be used by only one person at a time.

The Magnetic 1773 Elliptical is for consumer use only. It is not for use in public or semipublic

facilities.

THANK YOU FOR PURCHASING THE

Magnetic 1773 Elliptical

To help you get started, we have pre-assembled most of your

Magnetic 1773 Elliptical at the factory with the exception

of those few parts left unassembled for shipping purposes.

Simply follow the few assembly instructions set forth in this manual.

With regular workouts, you will be getting your body into shape

and be on your way to achieving a happier and healthier lifestyle.

Should you have any questions,

please call our Customer Service Department toll-free number,

1 (800) 375-7520

Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time.

Friday, 8:00 A.M. - 3:00 P.M., Central Time.

CALL US FIRST

Customer Service

1(800)375-7520

www.staminaproducts.com

TELEPHONE

CUSTOMER SERVICE

Tel: 1 (800) 375-7520

FAX

CUSTOMER SERVICE

Fax: (417) 889-8064

MAIL

STAMINA PRODUCTS, INC.

ATTN: Customer Service

P.O. Box 1071

Springfield, MO. 65801-1071

ONLINE

CUSTOMER SERVICE

customerservice@staminaproducts.com

www.staminaproducts.com

BEFORE YOU BEGIN

THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY : Allen Wrench (6mm)

Multi-opening Wrench

Right Handlebar

Upright

Meter

Lower Pivoting Arm

Warning Label

Right Pedal Arm

Right Pedal Cap

Wheel

Left Handlebar

Lower Pivoting Arm

Tension Knob

Left Pedal Cap

Left Pedal Arm

Left Cover

Rear Stabilizer

Leveling Cap

Right Crank

Pulse Sensor Plates

Front Stabilizer

Linkage

Foam Grip

Thank you for choosing the Magnetic 1773

Elliptical. We take great pride in producing this

quality product and hope it will provide many hours

ofqualityexerciseto makeyoufeelbetter,look better,

and enjoy life to its fullest.

It's a proven fact that a regular exercise program

can improve your physical and mental health. Too

often,ourbusylifestyleslimitour time andopportunity

to exercise. The Magnetic 1773 Elliptical provides

aconvenientandsimplemethodtobeginyourassault

ongettingyourbody in shape andachievingahappier

and healthier lifestyle.

Before reading further, please review the drawing

below and familiarize yourself with the parts that are

labeled.

Read this manual carefully before using the

Magnetic 1773 Elliptical.

Although Stamina constructs its products with the

finest materials and uses the highest standards of

manufacturing and quality control, there can

sometimes be missing parts or incorrectly sized

parts. If you have any questions or problems with

the parts included with your Magnetic 1773

Elliptical, please do not return the product. Contact

us FIRST!

If a part is missing or defective, please call us toll

free at 1-800-375-7520 (in the U.S.). Our Customer

ServiceStaffisavailableto assist youfrom 7:30A.M.

to5:00P.M.(CentralTime)MondaythroughThursday

and 8:00A.M. to 3:00 P.M. (Central Time) on Friday.

If you would like to contact us online, go to our

websiteatwww.staminaproducts.comand access the

Customer Service section.

Be sure to have the name and model number of the

product available when you contact us.

EQUIPMENT WARNING & NOTICE LABELS

Label is larger than actual size

WARNING LABEL(91)

This chart is provided to help identify the warning & notice labels on the Magnetic 1773 Elliptical. Please

take a moment to familiarize yourself with all of the warning & notice labels.

CRANK WARNING LABEL

(2 locations)

Part No. and Description Qty

65 Bolt, Button Head (M8 x 1.25 x 15mm) 9

66 Bolt, Button Head (M8 x 1.25 x 20mm) 2

72 Bolt, Hex Head (M6 x 1 x 35mm) 4

81 Nylock Nut (M8 x 1.25) 2

88 Lock Washer (M6) 4

89 Lock Washer (M8) 15

84 Acorn Nut (M6 x 1) 4

85 Acorn Nut (M8 x 1.25) 2

86 Arc Washer (M6) 4

87 Arc Washer (M8) 13

45 Large Washer (M8 x ø32 x 2mm thick) 2

52 Large Washer (M16 x ø32 x 0.5mm thick) 2

67 Bolt, Button Head (M8 x 1.25 x 48mm) 2

68 Bolt, Button Head (M8 x 1.25 x 75mm) 2

64 Carriage Bolt (M8 x 1.25 x 75mm) 2

75 Screw, Round Head (M5 x 15mm) 6

HARDWARE IDENTIFICATION CHART

This chart is provided to help identify the hardware used in the assembly process. Place the washers or the

ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to check the

length of the bolts and screws.

NOTICE: The length of all bolts and screws, except those with flat heads,

is measured from below the head to the end of the bolt or screw.

Flat head bolts and screws are measured from the top of the

head to the end of the bolt or screw.

mm.

in.

INCHES

MILLIMETERS

11/2021/2 31/2 41/2 51/2 61/2

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

6 8 10 12

3/16" 5/16" 1/2"3/8"1/4"

length

After unpacking the unit, open the hardware bag and make sure that you have all the following items.

Some hardware may be already attached to the part.

STEP 1

Attach the FRONT STABILIZER(2) to the MAIN FRAME(1) with CARRIAGE BOLTS(M8x1.25x75mm)

(64), ARC WASHERS(M8)(87), LOCK WASHERS(M8)(89), and ACORN NUTS(M8x1.25)(85).

STEP 2

Attach the REAR STABILIZER(3) to the MAIN FRAME(1) with BUTTON HEAD BOLTS(M8x1.25x 75mm)

(68), ARC WASHERS(M8)(87), and LOCK WASHERS(M8)(89).

NOTE: You can adjust the LEVELING CAPS(61) on the REAR STABILIZER(3) to keep the Magnetic

1773 Elliptical stable.

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all

packing materials from your area and place them back into the box.Do not dispose of the packing materials

until assembly is completed. Read each step carefully before beginning. If you are missing a part please call

ourtoll-free numberforassistance1-800-375-7520 ore-mail us at: customerservice@staminaproducts.com

ASSEMBLY INSTRUCTIONS

Bracket

Cable End

Spring Hook

Metal Fitting

STEP 3

Refer to the inset drawing. Lay the UPRIGHT(6) on the floor close to the front of the MAIN FRAME(1). Set

the TENSION KNOB(25) on the UPRIGHT(6) at position 8, so the CABLE END of the TENSION KNOB

KNOB(25) extends out of the metal fitting as far as possible. Connect the CABLE END of the TENSION

KNOB(25)tothe SPRING HOOK endof the TENSION CABLE(24). Pullthe CABLE END on the TENSION

KNOB(25) firmly and insert the cable through the slot in the bracket. Then insert the metal fitting on the end

of the CABLE END of the TENSION KNOB(25) into the hole at the end of the slot in the BRACKET. Adjust

the TENSION KNOB(25) and verify that the SPRING HOOK moves when the TENSION KNOB(25) is

adjusted.

STEP 4

Plugthe SENSORWIRE(30) firmly into the CONNECTION WIRE(29). CAUTION: Be carefulnot to damage

the SENSOR WIRE(30) and CONNECTION WIRE(29) when assembling the UPRIGHT(6).

STEP 5

InserttheUPRIGHT(6) ontotheMAIN FRAME(1) and securewithBUTTONHEADBOLTS(M8x1.25x15mm)

(65), ARC WASHERS(M8)(87), and LOCK WASHERS(M8)(89). Do not tighten the bolts until STEP 10.

Thereis an "L" decal onthe LEFT PEDALARM(4), and an "R" decal onthe RIGHT PEDALARM(5).

The RIGHT PEDAL SHAFT(42) has right hand threads and is tightened by turning clockwise.

TheLEFT PEDAL SHAFT(41) has lefthandthreadsandistightened byturningcounterclockwise.

ASSEMBLY INSTRUCTIONS

Place the front end of the RIGHT PEDAL ARM(5) on the ROLLER(58) of the FRONT STABILIZER(2).

Connectthe backend of the RIGHT PEDALARM(5) to the RIGHT CRANK(36). Thread theRIGHT PEDAL

SHAFT(42) intothe RIGHT CRANK(36) byhand.SECURELYTIGHTEN using a 15mmopen-ended wrench

or an adjustable wrench (not included). Repeat on the left side.The shoulder of the PEDAL SHAFT(41, 42)

should be in contact with the CRANK(35, 36) when securely tightened.

Check the tightness of the PEDAL SHAFT(41, 42) and CRANK(35, 36) regularly. Retighten as necessary.

RIGHT

LEFT

STEP 6

NOTE:

The LEFT and RIGHT PEDAL CAPS(46, 47) have a raised lip on three sides.Attach the LEFT and

RIGHT PEDAL CAPS(46, 47)to the LEFT and RIGHT PEDALARMS(4, 5) so that the side without

the raised lip is on the outside.

STEP 7: There is an "L" decal on the LEFT PEDAL CAP(46), and an "R" decal on the RIGHT PEDAL

CAP(47). Attach the RIGHT PEDAL CAP(47) tothe RIGHT PEDALARM(5) withROUND HEAD SCREWS

(M5x15mm)(75). Repeat on the left side.

NOTE:

WARNING!

The PEDAL SHAFT(41, 42) must be securely tightened to the CRANK(35, 36).

Failure to securely tighten may cause the PEDALSHAFT(41, 42) to become loose

from the CRANK(35, 36) and may result in serious injury to user and damage to

product. The shoulder of the PEDAL SHAFT(41, 42) should be in contact with the

CRANK(35, 36) when securely tightened.

ASSEMBLY INSTRUCTIONS

RIGHT

LEFT

Shaft

Look down from the top

STEP8: There isan "L" decalontheLEFT HANDLEBAR(8), and an "R" decal on theRIGHT HANDLEBAR

(9). To assemble the RIGHT HANDLEBAR(9), place a SPACER(51) and a LARGE WASHER(M16)(52) on

the right side of the SHAFT on the UPRIGHT(6). Slide the RIGHT HANDLEBAR(9) onto the SHAFT and

secure with a LARGE WASHER(M8)(45), LOCK WASHER(M8)(89), and BUTTON HEAD BOLT

(M8x1.25x20mm)(66). Repeat on the left side.

STEP9: AttachtheLOWER PIVOTINGARMS(10) tothe LEFT andRIGHT HANDLEBARS(8, 9) withHEX

BOLTS(M6x1x35mm)(72), ARC WASHERS(M6)(86), LOCK WASHERS(M6)(88), and ACORN NUTS

(M6x1)(84). Attach the LOWER PIVOTINGARMS(10) to the LINKAGES(11) on the PEDAL ARMS(4, 5) at

both sides with the PLASTIC WASHERS(M8)(49), BUTTON HEAD BOLTS(M8x1.25x48mm)(67), and

NYLOCKNUTS(M8x1.25)(81).

STEP 10: Look down from the top of the UPRIGHT(6) to make sure the PIVOT TUBES on the

HANDLEBARS(8, 9) are parallel to the FRONT STABILIZER(2) and the PEDAL ARMS(4, 5) are crossing

theROLLERS(58) properly.Tighten theBUTTON HEAD BOLTS(M8x1.25x15mm)(65) on theUPRIGHT(6)

from STEP 5 on page 8.

Pivot Tube

Indice

Altri manuali Stamina Ellittica

Stamina

Stamina 1725 Manuale utente

Stamina

Stamina In Motion E-1000 Manuale utente

Stamina

Stamina 703 Series Manuale utente

Stamina

Stamina 55-2010 Manuale utente

Stamina

Stamina Elliptical /Stepper Manuale utente

Stamina

Stamina 55-1771 Manuale utente

Stamina

Stamina 1725 Manuale utente

Stamina

Stamina INSTRIDE 55-1615 Manuale utente

Stamina

Stamina CT2.0 Manuale utente

Stamina

Stamina 1764 Manuale utente

Stamina

Stamina 55-1703 Manuale utente

Stamina

Stamina AVARI GX 8 Manuale utente

Stamina

Stamina 1701 Manuale utente

Stamina

Stamina InMotion E3000 Manuale utente

Stamina

Stamina AVARI Magnetic Elliptical Manuale utente

Stamina

Stamina InMotion E3000 Manuale utente

Stamina

Stamina 55-1610B Manuale utente

Stamina

Stamina Avari Fitness A550-043 Manuale utente

Stamina

Stamina Total Body Pro Elliptical 55-1702 Manuale utente

Stamina

Stamina InMotion Elliptical Manuale utente

Stamina

Stamina AVARI 2000E Elliptical Trainer Manuale utente

Stamina

Stamina 704 Manuale utente

Stamina

Stamina 55-2065 Manuale utente

Stamina

Stamina in motion e3000 Manuale utente

Manuali Ellittica popolari di altre marche

Weslo

Weslo Momentum 4.0 Elliptical Manuale operativo e di manutenzione

Progear Fitness

Progear Fitness Air elliptical pro 1307 Manuale utente

Torque Fitness

Torque Fitness XPLLP Manuale utente

Octane Fitness

Octane Fitness PRO3700C Manuale utente

Xterra

Xterra FS5.8e Manuale utente

Bodyguard

Bodyguard E-40 Manuale utente

Bonn Germany

Bonn Germany Concept 2.2 Manuale utente

Precor

Precor Resolute RSL 620 Manuale utente

NordicTrack

NordicTrack E 9.2 Elliptical Manuale utente

Vision Fitness

Vision Fitness X6600iNetTV Manuale utente

Matrix

Matrix MX-A5x Manuale utente

SportsArt Fitness

SportsArt Fitness ECO-NATURAL Elite E874 Manuale utente

Sears

Sears FREE SPIRIT C249 30737 0 Manuale utente

True

True FS-64 Manuale utente

Sport-thieme

Sport-thieme ST 310 Manuale utente

VIRTUFIT

VIRTUFIT CTR 1.1 Manuale utente

Kettler

Kettler GIRO C 1 Manuale utente

CIRCLE FITNESS

CIRCLE FITNESS E7 Manuale utente