Standa 11Beamage-3 Manuale utente

USER MANUAL

11Beamage-3

USB 3.0 Beam Profiling Camera

11Beamage-3 User’s Manual Revision 4.0 1

WARRANTY

The Standa 11Beamage-3 beam profiler carries a one-year warranty (from date of shipment) against

material and/or workmanship defects, when used under normal operating conditions. The warranty does

not cover damages related to battery leakage or misuse.

Standa Ltd. will repair or replace, at Standa’s option, any 11Beamage-3 that proves to be defective during

the warranty period, except in the case of product misuse.

Any attempt by an unauthorized person to alter or repair the product voids the warranty.

The manufacturer is not liable for consequential damages of any kind.

Customers must fill in and mail the warranty card in order to activate the warranty.

In case of malfunction, contact your local Standa distributor or Standa office to obtain a return

authorization number. The material should be returned to:

Standa Ltd.

Svitrigailos 4-39

03222 Vilnius

Lithuania

Tel: +370-5-2651474

Fax: +370-5-2651483

e-mail: sales@standa.LT

Website: www.standa.LT

CLAIMS

To obtain warranty service, contact Standa or send the product, with a description of the problem, and

prepaid transportation and insurance, to Standa. Standa assumes no risk for damage during transit.

Standa will, at its option, repair or replace the defective product free of charge or refund your purchase

price. However, if Standa determines that the failure is caused by misuse, alterations, accident or

abnormal conditions of operation or handling, you will be billed for the repair and the repaired product will

be returned to you, transportation prepaid.

11Beamage-3 User’s Manual Revision 4.0 2

SAFETY INFORMATION

Do not use the 11Beamage-3 if the device or the detector looks damaged, or if you suspect that the

11Beamage-3 is not operating properly.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy. If not installed

and used in accordance with the instructions, it may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, try

to correct the interference by taking one or more of the following steps:

•Reorient or relocate the receiving antenna.

•Increase the distance between the equipment and receiver.

•Connect the equipment to an outlet that is on a different circuit than the receiver.

•Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved in writing by Standa may void the

user’s authority to operate this equipment.

SYMBOLS

The following international symbols are used in this manual:

Refer to the manual for specific Warning or Caution information to avoid any

damage to the product.

DC, Direct Current

11Beamage-3 User’s Manual Revision 4.0 3

TABLE OF CONTENTS

1. 11Beamage-3 ........................................................................................................................................7

1.1. INTRODUCTION..................................................................................................................................7

1.2. SPECIFICATIONS ...............................................................................................................................7

1.2.1. 11Beamage-3 Mechanical Drawings.....................................................................................10

1.2.2. Sensor and Filter Spectral Responses..................................................................................11

2. Quick Start procedure..........................................................................................................................12

3. Main User Interface..............................................................................................................................13

4. The Main Controls................................................................................................................................14

4.1. MULTIPLE 11BEAMAGE-3 MODE.......................................................................................................14

4.2. CAPTURE CONTROLS......................................................................................................................15

4.2.1. Camera Status.......................................................................................................................15

4.2.2. Capture Button ......................................................................................................................15

4.2.3. Subtract Background Button .................................................................................................16

4.3. FILE CONTROLS..............................................................................................................................17

4.3.1. Open......................................................................................................................................17

4.3.2. Save Current Image ..............................................................................................................17

4.3.3. Save All Images in Buffer......................................................................................................18

4.3.4. Start Data Acquisition............................................................................................................18

4.3.5. Print Report ...........................................................................................................................19

4.4. BUFFER CONTROLS ........................................................................................................................22

4.4.1. Image Index...........................................................................................................................22

4.4.2. Previous Image and Next Image...........................................................................................22

4.4.3. Clear Buffer ...........................................................................................................................23

4.4.4. Animate .................................................................................................................................23

4.4.5. Buffer Size.............................................................................................................................23

4.5. DATA COMPUTATIONS.....................................................................................................................23

4.5.1. Filters.....................................................................................................................................24

4.5.2. Normalize ..............................................................................................................................25

4.5.3. Trigger...................................................................................................................................25

4.5.4. Show/Hide Options................................................................................................................26

4.5.4.1. Divergence...................................................................................................................................26

4.5.4.2. Relative Position...........................................................................................................................27

4.6. SOFTWARE INFO.............................................................................................................................27

4.6.1. Color Legend.........................................................................................................................28

4.6.2. About.....................................................................................................................................29

4.6.3. Help .......................................................................................................................................29

5. Home and Setup Panels......................................................................................................................30

5.1. HOME.............................................................................................................................................31

5.1.1. Main Controls ........................................................................................................................32

5.1.1.1. Beam Diameter Definition ............................................................................................................32

5.1.1.2. Crosshair Definition......................................................................................................................32

5.1.2. Measure.................................................................................................................................32

5.1.2.1. Diameter.......................................................................................................................................34

5.1.2.2. Centroid........................................................................................................................................34

5.2. SETUP............................................................................................................................................36

5.2.1. Exposure Time ......................................................................................................................37

5.2.2. Image Orientation..................................................................................................................37

5.2.3. Image Averaging ...................................................................................................................37

5.2.4. Active Area............................................................................................................................38

5.2.5. Pixel Addressing....................................................................................................................38

11Beamage-3 User’s Manual Revision 4.0 4

5.2.6. Gain.......................................................................................................................................39

5.2.7. ADC Level .............................................................................................................................39

5.2.8. Pixel Multiplication Factor (PMF)...........................................................................................39

5.3. DATA ACQUISITION..........................................................................................................................40

5.4. DIVERGENCE ..................................................................................................................................42

5.5. RELATIVE POSITION ........................................................................................................................43

5.6. CAMERA LENS ................................................................................................................................45

6. Display Panel.......................................................................................................................................47

6.1. 3D DISPLAY....................................................................................................................................48

6.1.1. 3D Display: Controls..............................................................................................................49

6.2. 2D DISPLAY....................................................................................................................................49

6.2.1. 2D Display: Controls..............................................................................................................50

6.3. XYDISPLAY....................................................................................................................................51

6.3.1. XY Display: Controls .............................................................................................................51

6.3.2. Gaussian Fit ..........................................................................................................................52

6.4. BEAM TRACKING DISPLAY ...............................................................................................................53

6.4.1. Beam Tracking Display: Controls..........................................................................................54

7. Troubleshooting ...................................................................................................................................55

7.1. WHILE TRYING TO INSTALL PC-BEAMAGE-3.0, THE FOLLOWING MESSAGE APPEARS:THE PROGRAM

CAN’T START BECAUSE MSVCR100.DLL IS MISSING[..]...................................................................................55

7.2. 11BEAMAGE-3 IS NOT DETECTED.....................................................................................................55

7.3. DO NOT DISCONNECT THE 11BEAMAGE-3WHILE IT’S STREAMING.......................................................55

7.4. THE DISPLAY AREA IS COMPLETELY WHITE........................................................................................55

7.5. CHANGING THE OPTICS IN FRONT OF THE 11BEAMAGE-3...................................................................55

7.6. SMALL BLACK SPOTS APPEAR ON THE IMAGE.....................................................................................55

7.7. IT IS NOT POSSIBLE TO START AN ACQUISITION.IT KEEPS OPENING A WARNING MESSAGE INDICATING

THAT 0GB IS AVAILABLE ON HARD DRIVE.....................................................................................................55

7.8. THERE IS NO SERIAL NUMBER DISPLAYED IN THE CAMERA..............................................................55

7.9. THE 10 BIT ADC LEVEL IS NOT AVAILABLE EVEN WHEN THE 11BEAMAGE-3 IS CONNECTED TO A USB 3.0

PORT. 56

8. Declaration of Conformity ....................................................................................................................57

Annex A ISO11146 and iso11670 Definitions.............................................................................................58

Annex B 11Beamage-3 Driver Installation Quick Guide.............................................................................61

Annex C 11Beamage-3 FIRMWARE Installation Quick Guide...................................................................70

Annex D Recycling and separation procedure for WEEE...........................................................................71

11Beamage-3 User’s Manual Revision 4.0 5

LIST OF ILLUSTRATIONS

FIGURE 1-1 11BEAMAGE-3 FRONT AND SIDE VIEWS .......................................................................................10

FIGURE 1-2 ATTENUATION FILTER TRANSMISSION...........................................................................................11

FIGURE 3-1 PC-BEAMAGE-3.0 USER INTERFACE............................................................................................13

FIGURE 4-1 PC-BEAMAGE-3.0 MAIN CONTROLS.............................................................................................14

FIGURE 4-2 THE PC-BEAMAGE-3.0 INTERFACE WITH AND WITHOUT THE MAIN CONTROLS RIBBON ..................14

FIGURE 4-3 11BEAMAGE-3 SELECTOR FOR NUMEROUS CONNECTED 11BEAMAGE-3........................................14

FIGURE 4-4 CAPTURE CONTROLS ..................................................................................................................15

FIGURE 4-5 CAMERA STATUS.........................................................................................................................15

FIGURE 4-6 CAPTURE BUTTON.......................................................................................................................15

FIGURE 4-7 SUBTRACT BACKGROUND BUTTON...............................................................................................16

FIGURE 4-8 SUBTRACT BACKGROUND MESSAGE BOX.....................................................................................16

FIGURE 4-9 FILE CONTROLS ..........................................................................................................................17

FIGURE 4-10 OPEN FILE BUTTON...................................................................................................................17

FIGURE 4-11 SAVE CURRENT IMAGE BUTTON.................................................................................................17

FIGURE 4-12 SAVE ALL IMAGES IN BUFFER BUTTON .......................................................................................18

FIGURE 4-13 START DATA ACQUISITION BUTTON............................................................................................18

FIGURE 4-14 PRINT REPORT BUTTON ............................................................................................................19

FIGURE 4-15 PRINT REPORT PREVIEW...........................................................................................................19

FIGURE 4-16 PRINT REPORT PAGE 1 .............................................................................................................20

FIGURE 4-17 PRINT REPORT PAGE 2 .............................................................................................................21

FIGURE 4-18 BUFFER CONTROLS...................................................................................................................22

FIGURE 4-19 IMAGE INDEX.............................................................................................................................22

FIGURE 4-20 NEXT AND PREVIOUS IMAGE BUTTONS .......................................................................................22

FIGURE 4-21 CLEAR BUFFER BUTTON............................................................................................................23

FIGURE 4-22 ANIMATE BUTTON......................................................................................................................23

FIGURE 4-23 BUFFER SIZE ............................................................................................................................23

FIGURE 4-24 DATA COMPUTATIONS ...............................................................................................................23

FIGURE 4-25 FILTERS BUTTON.......................................................................................................................24

FIGURE 4-26 SPATIAL FILTER EXAMPLE..........................................................................................................24

FIGURE 4-27 NORMALIZE BUTTON..................................................................................................................25

FIGURE 4-28 NORMALIZATION EXAMPLE.........................................................................................................25

FIGURE 4-29 TRIGGER BUTTON .....................................................................................................................25

FIGURE 4-30 SMA CONNECTOR FOR TRIGGER INPUT .....................................................................................25

FIGURE 4-31 SHOW/HIDE OPTIONS BUTTON...................................................................................................26

FIGURE 4-32 SHOW/HIDE OPTIONS................................................................................................................26

FIGURE 4-33 DIVERGENCE BUTTON ...............................................................................................................26

FIGURE 4-34 RELATIVE POSITION BUTTON .....................................................................................................27

FIGURE 4-35 SOFTWARE INFO .......................................................................................................................27

FIGURE 4-36 COLOR LEGEND BUTTON...........................................................................................................28

FIGURE 4-37 COLOR LEGEND ........................................................................................................................28

FIGURE 4-38 ABOUT BUTTON.........................................................................................................................29

FIGURE 4-39 HELP BUTTON...........................................................................................................................29

FIGURE 5-1 GRAPHIC DISPLAY.......................................................................................................................30

FIGURE 5-2 HOME TAB..................................................................................................................................31

FIGURE 5-3 FIXED COORDINATES SYSTEM FOR THE SENSOR ..........................................................................34

FIGURE 5-4 PEAK TO AVERAGE......................................................................................................................35

FIGURE 5-5 PEAK TO AVERAGE RATIO EXAMPLE.............................................................................................35

FIGURE 5-6 SETUP TAB .................................................................................................................................36

FIGURE 5-7 PIXEL ADDRESSING MODE...........................................................................................................38

FIGURE 5-8 PIXEL MULTIPLICATION FACTOR...................................................................................................39

FIGURE 5-9 EXAMPLE FILE OF A MEASUREMENT ACQUISITION.........................................................................40

FIGURE 5-10 DATA ACQUISITION TAB.............................................................................................................41

FIGURE 5-11 DIVERGENCE TAB......................................................................................................................42

FIGURE 5-12 RELATIVE POSITION TAB............................................................................................................43

11Beamage-3 User’s Manual Revision 4.0 6

FIGURE 5-13 COORDINATES DEFINED BY USER ..............................................................................................44

FIGURE 5-14 MEASURES SECTION.................................................................................................................44

FIGURE 5-15 CAMERA LENS CALIBRATION SECTION........................................................................................45

FIGURE 5-16 PIXEL MULTIPLICATION FACTOR SECTION...................................................................................46

FIGURE 6-1 DISPLAY PANEL...........................................................................................................................47

FIGURE 6-2 3DDISPLAY.................................................................................................................................48

FIGURE 6-3 2D DISPLAY SHOWING CROSSHAIRS AND DIAMETER POSITIONS....................................................49

FIGURE 6-4 2D DISPLAY................................................................................................................................50

FIGURE 6-5 XYDISPLAY................................................................................................................................51

FIGURE 6-6 BEAM TRACKING DISPLAY............................................................................................................53

11Beamage-3 User’s Manual Revision 4.0 7

1. 11BEAMAGE-3

1.1. INTRODUCTION

Standa introduces the new 11Beamage-3. Its sleek and thin design allows the 11Beamage-3 to fit

between tight optical components. Its USB 3.0 connection and improved algorithm allows very fast frame

rates. The new 2.2 MPixel CMOS sensor has a large ⅔” optical format with a small 5.5 µm pixel pitch

allowing high resolution on large beams. Most importantly the innovative and improved PC-Beamage-3.0

software is simple and intuitive to any new or expert beam profiling user.

1.2. SPECIFICATIONS

The following specifications are based on a one-year calibration cycle, an operating temperature of 18 to

28ºC (64 to 82ºF) and a relative humidity not exceeding 80%.

Table 1-1 List of Specifications

Sensor Specification

Sensor Technology

CMOS without coverglass

Sensor Size

11.3 x 6.0 mm

Sensor Area

0.67 cm2

Pixel Count

2.2 MPixels

Pixel H x V

2048 x 1088

Optical Format

⅔”

Pixel Dimension

5.5 µm

Minimum Measurable

Beam

55 µm

ADC

12 bit (default) or 10 bit

Shutter Type

Global

Wavelength Range

350 -1150 nm

Frame Rate

9 fps (2.2 MPixel Full Frame)

12 fps (1.1 MPixel Active Area 2048 x544)

16 fps (0.016 MPixel Active Area 128 x 128)

RMS noise

1000:1 (60 dB)

Minimum and

Maximum Exposure

Times

0.06 to 100 ms

External Trig

SMA connector

1.1 volts to 24 volts, the rise edge response time is 300 ns

Trigger signal pulse width: 300 ns to 230 ms

Optional SMA to BNC adaptor (202273) :

11Beamage-3 User’s Manual Revision 4.0 8

Damage Thresholds

Maximum Average

Power

1 W with ND filter

Saturation Level

(1064 nm, CW, ND4)

10 W/cm2

Saturation Level

(1064 nm, Pulsed,

ND4)

300 µJ/cm2

PC Requirements

USB Port

USB 3.0 port for optimal performance

USB 2.0 port

Operating System

Compatibility

Windows 8

Windows 7

Windows Vista

Average RAM

allocation

500 MB

PC Recommended

Requirement

4 Gb RAM minimum

Intel i series processors (i3, i5, i7) or equivalent for optimal performance,

other processors will have lower specifications.

Internet Upgrades

Downloadable at website

Physical Characteristics

Dimensions

61 H x 81.1W x 19.7D

Weight

138 g

Default Attenuation

ND 4.0

Measured and Displayed Parameters

Displays

3D, 2D, XY (crosshair), Beam Tracking

Beam Diameter

Definition

4 Sigma (ISO) - ISO-11146-1:2005

FWHM along crosshair (50%)

1/e2along crosshair (13.5%)

86% effective diameter (D86)

Beam Center

Definition

Centroid - ISO-11146-1:2005

First Encountered Peak

11Beamage-3 User’s Manual Revision 4.0 9

Displayed

Measurements

Major Axis

Minor Axis

Effective Diameter

Ellipticity

Orientation

Centroid X and Y

Peak X and Y

Peak Saturation Level

Peak to Average Ratio X and Y

Divergence

Fitted Gaussian equations

Roughness fit along crosshairs

Gaussian fit along crosshairs

Mean Centroid Position

Azimuth

Beam Position Stabilty

Setup Options

Exposure Time (auto or manual)

Image Orientation (rotation and flip)

Image Averaging (temporal filter)

Active Area

Pixel Addressing

Gain

ADC Level

Magnifying Lens

Processing Option

Background Subtraction

Area Filters (triangular and flat spatial filters)

Normalized Display

Trigger

Buffer

Buffer size from 1 to 32 frames

Possibility to animate stored frames

File options

Save 1 or all images in buffer

Save in native format, text format, or binary format

Load native format files

Print report

Save 3D or 2D image in bitmap format

Save crosshairs in text format

Data Acquisition of measurements in text format and in native format

Indice

Manuali Macchina fotografica digitale popolari di altre marche

Mercury

Mercury 350K Manuale utente

Pentax

Pentax Optio LS 465 Manuale utente

Sanyo

Sanyo VPC-S1085 Manuale utente

GE SMART A1255 Manuale utente

Point Grey

Point Grey Gazelle Manuale utente

Nikon

Nikon COOLPIX A Manuale utente

Pentax

Pentax P-5 Manuale utente

BlazeVideo

BlazeVideo A280 Manuale utente

Sony

Sony MCA-20 Manuale utente

Sony

Sony Alpha DSLR-A290 Manuale utente

ATIK Cameras

ATIK Cameras One Manuale utente

CohuHD Costar

CohuHD Costar 3930 Series Manuale utente

Leica

Leica M10-R Manuale utente

FujiFilm

FujiFilm FinePix A700 Manuale utente

Lorex

Lorex LNZ81P25 Series Manuale utente

GE J1470S Manuale utente

Sony

Sony A6700 Guida utente

Canon

Canon EOS ELAN7 Manuale utente