Star systems Ranger Manuale utente
Ranger USB Reader
User Guide
|Ranger USB Reader User Manual |
1
Disclaimer
Star Systems International and the Star Systems International logo are trademarks of Star Systems
International Ltd. in Hong Kong and other countries.
Microsoft, Windows, the Windows logo are trademarks of Microsoft Corporation in the U.S. and
other countries. All other products names mentioned herein may be trademarks of their respective
companies.
Star Systems International Ltd. shall not be liable for technical or editorial errors or omissions
contained herein or for incidental or consequential damages in connection with the furnishing,
performance, or use of this material. The information in this document is provided “as is” without
warranty of any kind - including but not limited to, the implied warranties of merchantability and
fitness for a particular purpose, and is subject to change without notice. The warranties for Star
Systems International products are set forth in the express limited warranty statements
accompanying such products. Nothing herein should be construed as constituting an additional
warranty.
This document contains proprietary information that is protected by copyright. No part of this
document may be photocopied, reproduced, or translated to another language without the prior
written consent of Star Systems International Ltd.
This product is not designed, intended, authorized or warranted to be suitable for life support
applications or any other life critical applications which could involve potential risk of death,
personal injury, property damage, or environmental damage.
Ranger USB Reader User Manual
Version 1
Copyright © 2017
SSI reserves the right to change specifications without prior notice
|Ranger USB Reader User Manual |
3
Reader Overview
The Ranger is a new compact, full-featured ISO18000-6C/EPC C1G2 reader which is
perfect for use in a variety of tag reading, writing and programming applications.
Ranger is powered by a standard USB connection (requires USB 2.0 or above), no
additional power supply is needed. Its small size allows it to easily be used on a desktop
or where space is limited.
The Ranger Reader is very user friendly and extremely easy to set up read and write
tags with its standard free software. It also comes with a SDK to allow you to create
your own custom programs to interface and drive the Ranger Reader.
The Ranger reader’s features provides a powerful, and very economical way to
implement UHF RFID technology in just about any application.
Possible Applications:
•Point of Sale RFID reading and writing
•Commissioning/Activation of RFID Tags
•Parking and Access Control
•Production / WIP checkpoints
•Document Tracking and Management
•Library Management
•Catering Management
•Healthcare/Pharmaceutical Applications
The reader has 2 LEDs as status indicators. The LEDs provide indication for the
following:
Status \ LEDS
Blue
Red
Connected to Host
Off
On
Tag read/write
operation
Flash
On
|Ranger USB Reader User Manual |
4
Package Content
Ranger Reader x 1
USB Cable x 1
|Ranger USB Reader User Manual |
5
Installing the reader
The reader is intended to work on a desktop environment. We recommend operating
the reader on a NON-Metal desktop surface. Since metal cause reflection of RF, and
may cause undesirable performance of the reader.
Mechanical installation
Connect the USB cable to the reader and to the host PC. The reader requires USB
2.0 or above to operate on a PC.
The reader’s LED should turn on upon successful connection.
Software installation
The reader requires installation of driver to function properly.
System requirement
64 MB Ram
200 MB of Hard disk space
Windows 2000, Windows Vista, Windows 7 and Windows 8
Driver installation
The Ranger Reader use serial protocol to communicate with host PC. In order for
the host PC to be able to communicate with the reader, it may be necessary to
install the USB to serial driver.
1. Unzip “CP210x_VCP_Windows.zip”
2. If your operating system is running 64bits,
run“CP210xVCPInstaller_x64.exe” Otherwise if your operating system is
running 32bits, run“CP210xVCPInstaller_x86.exe”.
3. Follow the on screen instruction of the installer.
|Ranger USB Reader User Manual |
6
Ensure the reader is connected properly
1. Go to Control Panel > Device Manager
2. Open tab（COM 和LPT）”，
3. You should see “CP201x USB to UTRA bridge(COM X)”where X is the port
number assigned by the PC
Troubleshooting
•If you cannot see the “CP201x USB to UTRA bridge” in device manager, ensure
the USB cable connect to the reader properly and the reader LED is on.
•If you see a (!) symbol at the side of the “CP201x USB to UTRA bridge” in device
manager, this indicates that the PC is not able to run the driver properly. You
can try:
1. Re-install the driver as it may be corrupted.
2. Connect to another USB port of the PC.
|Ranger USB Reader User Manual |
7
Using the reader
Tag placement
To ensure the tag read and write operations can be perform with a consistent
performance, please ensure to place the tag’s whole inlay within the surface of the
reader.
Running the demo software
Connect the reader to the PC using the USB cable before running the test tool.
Upon successful connection of the test tool with the reader, you will be able to
hear two beeps from the reader. A pop up window will be shown as followed:
If the software failed to connect to the reader automatically, you will see a pop up
error message:
In case where the software failed to automatically connect the correct com port,
you can manually input the com port to connect to.
1. Go to Settings
2. Go to the “Com” tab
|Ranger USB Reader User Manual |
8
3. Change the value of the “Serial Ports”*
**You can go to Window> Control Panel>Device Manager to check the Com
Port number that the reader is using, please refer to section driver installation
section.
Reading tags in Inventory Mode
At the main page, click “Start Inventory” Button, information on tag being read will
be displayed in the center of the screen as a list. If multiple tags are being read,
multiple records will be shown.
|Ranger USB Reader User Manual |
9
To stop the reader from reading tags, click “Stop Inventory Run” Button.
To clear the tag data read, click “Clear Inventory” button.
Tag Memory Management
To perform read/write operation on individual tag’s memory banks, right click on
the tag data record to bring up the option Menu.
Indice
Altri manuali Star systems Lettore di schede
