10
Set Date/Time
1. Create a new “.txt” file, name it as “time.txt”
2. Set the correct date and time into the file according to the
following format: 2012/10/01 08:55:00
2012 is the year, 10 is the month, 01 is the day, 08 is the
hours, 55 is the minutes, 00 is the seconds.
3. Save file and immediately copy it into micro SD card.
4. Remove camera from computer, restart and record, the
date and time are set up successfully.
Other Settings
1. Insert the card, turn on then turn off the camera, it will
create the setup fie on card automatically.
2. Connect the camera with computer by USB cable.
3. Open the removable disc, find the file named “set.txt” in card.
4. Timestamp=Y
5. MaxRecordTime=30
6. AutoRecord=N
7. CycleRecord=N
8. Set TimeStamp, AutoRecord and CycteRecord by “Y” or “N”.
9. Set MaxRecordTime as 1 to 60 minutes, or “N” will disable
time limitation and 3.6GB will be the file size limit.
Timestamp = Y With date/time stamp on video records.
Timestamp = N Without date/time stamp on video records.
MaxRecordTime
Video recording section, support 1 to 60 minutes. Standard is
30 minutes. “N” will disable time limitation and 3.6GB will be
the file size limit
AutoRecord = Y Auto mode, record when camera is switched on, save then
stop when camera stops.
AutoRecord = N Manual mode, press button to record.
CycleRecord = Yes Overwrite files in front and continue recording automati-
cally when card is full.
CycleRecord = No Stop recording then turn off when card is full.
