StarLeaf Touch 2035 Manuale utente

StarLeaf GT Mini

Installation Guide

01 February 2018

Contents

About the codec 4

The connectors 4

Using the correct HDMI and DVI cables 5

Audio voltage levels 5

Extending the camera cables 6

CEC support 6

GT Mini dimensions and mounting 7

About the touchscreen controller 8

How to install GT Mini 3330 9

About the camera 15

Camera control for the PTZ camera 15

Camera presets 15

Audio settings for Group Telepresence 18

Microphone settings 18

StarLeaf microphones 18

3rd party XLR microphones 18

Line in microphones 19

Line out 19

Advanced settings 20

Auto-answer mode 20

API mode 20

Max send and receive rates 20

Typical installation of GT Mini 21

Using the Conference Phone 2220 22

LED behavior 22

Installing the Conference Phone 2220 22

Installing the Conference Phone 2220 23

Using Group Telepresence 24

About StarLeaf touchscreen controllers 25

Touchscreen controller features 27

Appendix: LED behavior 30

Network port LED behavior 30

StarLeaf Controller Port LED behavior 30

Legal information 31

StarLeaf GT Mini, 01 February 2018 Page 2 of 31

Third party software acknowledgments 31

Disclaimers and notices 31

StarLeaf GT Mini, 01 February 2018 Page 3 of 31

About the codec

The connectors

The figure below shows the connectors on the rear of the Group Telepresence 3330 (GT

Mini) codec.

Camera

Control

COM

360-00230

Network

Video Out

Camera In

Link/Act Gigabit Link/Act Gigabit

Mic In

Computer In DVI-I

DC 48V

USB

Line Out

Line In

3330 Group Telepresence

Microphone Audio-out PTZ camera (optional)

PTZ camera

control

(optional)

USB camera (optional) Power

Telepresence

screen 1

Telepresence

screen 2

(optional)

PC video-in (optional) Network

StarLeaf Touch

Audio-in

B A

HDMI

StarLeaf

Controller Only

The table below describes the connectors:

Connector Description

Microphone XLR-F connectors. Connect the microphone. You can alter the

power and gain settings of the microphone via the StarLeaf Portal

(refer to Audio settings for Group Telepresence (p18))

Audio line-in 3.5mm line level stereo audio connector. You can connect a line

level microphone source or input other audio, for example a

computer. In either case, ensure you have the correct settings for

audio in the Portal. For more information, refer to How to install GT

Mini 3330 (p9)

Audio line-out 3.5mm stereo audio connector. If required, you can connect to a

local loudspeaker system. You can alter the line-out audio settings

via the StarLeaf Portal (refer to Audio settings for Group

Telepresence (p18))

COM This port is for a 4P4C connector providing an RS-232 interface. This is

the same connector used in RJ9, RJ10, and RJ22. There is both a

serial and an IP API option for the GT Mini and a StarLeaf Room

Systems API guide is available

Camera control Mini-DIN-8 connector for controlling zoom, pan, and tilt using

VISCA™ protocol. You connect to this port if you are using a PTZ

video conferencing camera. For more information, refer to About

the camera (p15)

Camera input HDMI connector. You connect to this port if you are using a PTZ

video conferencing camera. For more information, refer to About

the camera (p15)

Computer In DVI-I connector. Connect a PC to share a desktop in a video call

StarLeaf GT Mini, 01 February 2018 Page 4 of 31

About the codec

Connector Description

Video Out HDMI x2 HDMI connectors. Video Out connector A outputs both audio and

video (1080p60 only) to the screen. If you are connecting a second

screen, connect it to HDMI port B

USB x2 USB connectors. If you are using a USB webcam, you connect it to

one of the USB ports

Network 10/100/1000 Mbit/s auto-sensing Ethernet port. Connect to the

network

StarLeaf Controller

Only

Connect to the PoE port on the rear of the StarLeaf touchscreen

controller to both power the touchscreen controller and to allow

communication between the touchscreen controller and the

codec

+48V power Connect to the supplied AC/DC adaptor

There are LEDs on the Network port and the StarLeaf Controller Only port of the codec

indicating the status of the network link, and the link to the StarLeaf touchscreen

controller. LED behavior is described in Appendix: LED behavior (p30).

Note: Older models of GT Mini have HDMI ports labeled 1 and 2. In this case, plug screen 1

into port 2.

Using the correct HDMI and DVI cables

When connecting HDMI or DVI cables to the camera inputs, the PC input, and the

telepresence screen display outputs, ensure you use the correct gauge of HDMI/DVI

cable. For short cable lengths of up to 5m (17 feet), use 28AWG or thicker core. For longer

lengths, use 24AWG or thicker. StarLeaf does not support the use of HDMI or DVI cables of

longer than 15m (49 feet) with the codec.

Audio voltage levels

If you are using external equipment to connect the GT Mini to your microphones, you

need to be aware of the required audio voltage levels for XLR, audio line-in, and audio

line-out:

nXLR Mic in sensitivity -40dBu to -13dBu (The StarLeaf Portal 0dB gain setting is equivalent

to -13dBu)

n3.5mm Line in sensitivity -16dBu to +12dBu (The StarLeaf Portal 0dB setting is equivalent to

+7dBu)

n3.5mm Line out range -40dBu to +2 dBu (The StarLeaf Portal 0dB gain setting is

equivalent to +2dBu)

Phantom power is compatible with active microphones that are designed for 48V

phantom power. The following are specifications of the power supply:

nOutput voltage when operational, no load is 45.3V +/- 4%

nOutput voltage when muted, no load is 35.3V +/- 4%

nPower output source impedance is 1.975kOhms +/- 2%

StarLeaf GT Mini, 01 February 2018 Page 5 of 31

About the codec

Extending the camera cables

StarLeaf room systems that use a PTZ camera are provided with camera connection

cables of 5m in length. If you need to install the camera further than 5m from the room

system, you must extend those cables.

You can extend those cables using a third-party product called an extender. This product

effectively carries the media and camera-control signals across a cat 6 Ethernet cable.

StarLeaf has partnered with Sound Control Technologies to provide this solution which is

available at http://www.soundcontrol.net/solutions/#

CEC support

CEC is supported by GT Mini 3330 as a beta feature. If you want to enable CEC support on

your GT Mini 3330, contact Starleaf Support.

CEC allows the GT Mini to communicate control commands to the connected screen/s

across HDMI. When enabled, it will put the screen/s to sleep in between calls. GT Mini will

wake the screens when it receives, or you make, a call. If the screens are displaying from a

different source when GT Mini receives, or you make, a call, GT Mini will tell the screens to

switch the source to GT Mini.

StarLeaf GT Mini, 01 February 2018 Page 6 of 31

GT Mini dimensions and mounting

StarLeaf GT Mini, 01 February 2018 Page 7 of 31

About the touchscreen controller

Every Group Telepresence system comes with a touchscreen controller: the StarLeaf

Touch 2035. You use the touchscreen controller as the means for making and controlling

video calls with Group Telepresence. Through the touchscreen controller, you can access

the directory and contacts. You can use the touchscreen controller to create ad hoc

conferences, and to add and remove participants.

The StarLeaf Touch 2035

StarLeaf GT Mini, 01 February 2018 Page 8 of 31

How to install GT Mini 3330

Before installing a StarLeaf product, read the safety information at

www.starleaf.com/safety.

Pre-requisites

Before installing the room system, ensure you have the following:

nA StarLeaf Cloud account

nOne or two telepresence screens that support a 1080p60 input format (use televisions

that have an audio-output capability, or alternatively, you can connect loud speakers

to the codec). If the televisions have an option to enable "Game Mode" or "PC Mode",

then do so as this reduces media processing delays and improves video experience

nSupported video camera

nNetwork connection routable to the public Internet

nMicrophone

nStarLeaf touchscreen controller (not installed)

Unpack the room system. The package contents is:

nCodec

nInstallation sheet

nAC/DC adaptor

nCables

lPower cable

lHDMI to HDMI cables (two) (connects codec to screens)

lDVI-I to DVI-I cable (connects codec to PC video)

lNetwork cable

nAdaptors for the codec-to-PC cable

lDVI-I to HDMI

lDVI-I to VGA

lDVI-I to DVI-D

Positioning the codec

1. Ensure you have chosen an appropriate installation site:

lThe codec must be accessible with all cables easily connected

lYou must provide ventilation for the codec; leave a space of at least 10cm (4

inches) behind, in front, and to the left and right of the codec

lEnsure that the power switch is easily accessible; the power switch is the main

disconnect device for the codec

lUse a grounded AC power outlet for the codec

2. Place the unit on a firm horizontal surface. If you intend to mount the unit, refer to GT

Mini dimensions and mounting (p7).

Connecting cables to the codec

1. Using an Ethernet cable, connect the StarLeaf Controller port on the codec to the

network port (PoE) on the rear of the touchscreen controller. The network port on the

touchscreen controller is marked with this symbol:

StarLeaf GT Mini, 01 February 2018 Page 9 of 31

How to install GT Mini 3330

Note: The touchscreen controller must connect directly to the codec; do not

connect the touchscreen controller via a switch to the codec.

Note: If you are using the StarLeaf Conference Phone 2220, refer to Installing the

Conference Phone 2220 (p23).

2. Using an Ethernet cable, connect the Network port on the rear of the codec to an

Ethernet switch in your network. The Ethernet port is a 10/100/1000 Mbit/s auto-sensing

port and is set to ‘auto’ by default.

Note: In all cases, the speed and duplex settings at either end of the connection must

be identical. Using non-matching settings causes severe packet loss.

To configure the network speed and duplex settings of the codec’s Network port: on

the touchscreen controller that you have connected to the codec, go to settings >

networking > network port speed.

3. Connect one telepresence screen to Video Out A. If you have a second telepresence

screen, connect it to Video Out B. (Note: on older systems, if you have only one screen,

connect it to the port labeled: HDMI 2.)

4. Connect the camera. One of:

lPTZ camera: connect the camera to Camera Control and to Camera In and then

connect power to the camera

lWebcam: connect the camera to the lower of the two USB ports

5. Connect the microphone to Microphone 1. (Note that you can, instead, use a

microphone connected to Audio In. If you do so, refer to Using the line-in connector

and to Audio settings for Group Telepresence (p18)).

6. Using the supplied AC/DC adaptor and power cable, connect power to the codec.

The power LED on the side of the codec lights.

StarLeaf GT Mini, 01 February 2018 Page 10 of 31

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali StarLeaf Sistema di conferenza

StarLeaf

StarLeaf GT Mini Manuale utente

StarLeaf

StarLeaf GTm 5140 Manuale utente

StarLeaf

StarLeaf Group Telepresence Mini 3330 Manuale utente

StarLeaf

StarLeaf Touch 2045 Manuale utente

StarLeaf

StarLeaf GTm 5250 Manuale utente

StarLeaf

StarLeaf PT Mini Manuale utente

StarLeaf

StarLeaf Phone 2120 Manuale utente

StarLeaf

StarLeaf GT Mini 3330 Manuale utente

StarLeaf

StarLeaf Group Telepresence 3351 Manuale utente

StarLeaf

StarLeaf GTm Manuale utente

StarLeaf

StarLeaf Teamline Portfolio Manuale utente

StarLeaf

StarLeaf GTm 5250 Manuale utente

StarLeaf

StarLeaf GTm 5250 Manuale utente

StarLeaf

StarLeaf Group Telepresence 3351 Manuale utente

StarLeaf

StarLeaf Touch 2045 Manuale utente

StarLeaf

StarLeaf Teamline 5140 Manuale utente

StarLeaf

StarLeaf GT 3351 Manuale utente

StarLeaf

StarLeaf GTm Manuale utente

Manuali Sistema di conferenza popolari di altre marche

Kramer

Kramer VIA GO Manuale utente

AVT

AVT MAGIC AC1 Go Manuale utente

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manuale utente

Sony

Sony PCS-I150 Manuale utente

Middle Atlantic Products

Middle Atlantic Products VTC Series Manuale utente

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guida

Speakerbus

Speakerbus iD 712 Manuale utente

Trelleborg

Trelleborg SafePilot CAT PRO Manuale utente

Sennheiser

Sennheiser ADN Manuale utente

ADTRAN

ADTRAN NetVanta 7100 Manuale utente

AINA

AINA PTT Voice Responder Manuale utente

Yamaha

Yamaha ProjectPhone PJP-100H Manuale utente

vissonic

vissonic VLI Series Manuale utente

Panasonic

Panasonic KX-VC500 Manuale utente

Poly

Poly Trio 8300 Manuale utente

Crestron

Crestron Mercury CCS-UCA-SMK Disegno dimensionale

Inmarsat

Inmarsat mini M Manuale utente

Tenveo

Tenveo ALL-IN-ONE Manuale utente