Start Shaphon CC-M3 Manuale utente
CNC Cutting Controller CC-M3 & CC-M3c Manual
Beijing Flourishing Start Control Technology Co., Ltd.
5F Building 2, No.9 Shuangyuan Road, Shijingshan District, Beijing, China 100041
Tel: 0086 10 8890 9235 Mobile (WhatsApp): 0086 159 0106 9532; Email: cuttingcnc@hotmail.com; Skype: henryhaozq
Catalog
Safety
Chapter 1 controller general introduction
1-1 Installation dimension
1-2 display
1-3 keys
1-4 USB port
1-5 Switch power supply
1-6 Replays
1-7 Signal ports
Chapter 2 parts load
2-1 load from Figures
2-2 load from disk
2-3 load from Edit
2-4 restore parts cutting
Chapter 3 parts nest
3-1 rotation
3-2 mirror
3-3 scale
3-4 array
3-5 nest
Chapter 4 parts cutting
4-1 auto interface, figures display, operation display, state display
4-2 manual interface
4-3 preparation before cutting, cutting mode, speed limitation, kerf
4-4 optional operation, torch movement, return, reset (fixed point), parts alignment, outline, simulation, start
point change, section, manual output
4-5 operation during cutting
4-6 operation after pause
Chapter 5 Settings
5-1 speed
5-2 system
5-3 control
5-4 craft
5-5 figure
5-6 machine
5-7 configuration
5-8 advanced parameter management
5-9 save
Chapter 6 Edit
6-1 edit function
6-2 code instrument
6-3 coordinate system
6-4 G command
6-5 M assistant function
6-6 file manager
Chapter7 Diagnose
7-1 diagnose
Appendix
1. Quick user guide
Safety notice
Please carefully read the manual before using the product. Here list some safety operation items, but they
can’t replace some safety operation rules from the country and the company.
Safety operation
Users must follow safety operation rules made by the country and the company.
Mechanical dangerousness
Operation and repair of automation equipment are a little dangerous and are careful. Please be far away from
the working equipment. Please control the equipment by correctly using the panel’s buttons. Don’t wear so
loose clothes when using and repairing the equipment.
High-voltage dangerousness
Be careful of electric shock during operation. Please install the equipment according to its manual. Don’t touch
cables or wires after power on. Only professional maintenance personal can open the controller. When the
equipment has problems, power should be off and then repair.
Power isolation
Please check whether power is right (AC220V±15%).
You must need an AC stabilized-voltage power if power is beyond the above range.
In some places there is no normal power, such as zero line and ground line are together or no zero line, an
isolation transformer must be used from 2-phase/3-phase AC380V to 2-phase AC220V.
A lightning rod is also a must.
Working environment
The controller’s working temperature is 0-40℃. If out of its working temperature, the controller probably
works worse. If the temperature is below 0℃, the screen will not display normally.
Relative humidity is 0-85%.
Special protection is a must when working in high-temperature, high-humidity, and corrosive-gas environment.
Don’t ask dusts, metal chips and others to go into the controller.
Controller connection
The controller’s input/output uses DC24V power (3A or over 3A) and the power can’t be used for other
electrical equipment. When the power is not connected and emergent stop and limit position are both valid,
the controller will in the state of emergent stop and limit position.
The connection line between the controller and the driver should be shielding wire.
Don’t plug in and plug out when power on.
Controller’s input/output line should connect well.
Good ground-connection
All parts of the cutting machine and the controller should connect ground.
Controller’s ground wire diameter should be over 4 mm², and try to keep a shorter distance to the ground.
DC24V ground (-) must break with ground.
Controller protection
Don’t ask dusts, metal chips and other materials to go into the controller so that it can’t normally work.
The controller’s LCD screen should be protected.
Others
The controller can use U disk and its format is FAT or FAT32
The controller has a manual.
If the controller damages because of abnormal operation, we are not responsible for maintenance.
Controller operation and maintenance
Only professional operators can use the controller.
Controller operation
Please use fingers to press buttons.
Please don’t change functions and parameters at random if you are not familiar with them.
Please feel free to let us know problems during operation.
Controller maintenance
When the controller can’t work normally, you need to check relative hardware or wire connection after power
off.
Don’t open the controller to repair without professional personnel.
Please feel free to let us know when the controller has problems.
Declaration
Controller guarantee instruction
Guarantee period: within 12 month after leaving our company.
Guarantee terms: during guarantee period any problems under normal operations.
During guarantee period, we charge for out of guarantee terms.
We charge for all problems out of guarantee period.
Following situations are beyond guarantee:
Any damage under abnormal operation or accident damage;
Damaged by plug in and out of the controller when power on;
Natural disasters;
Repair, disassemble, retrofit, etc. at random without our allowance.
Chapter 1 controller general introduction
Basic parameters
Processor: industrial ARM chip
Display: 10.4”color LCD
Input/output: 20 optoelectronic isolation input, 20 optoelectronic isolation output
Axis number: 2 axes, 4 axes are available
AD/DA: DA X 1
Communication: RS232 X 2, USB X 1
Pulse equivalence: electronic gear numerator, denominator set range: 1 ~ 65535
Store space: 4G
Installation dimension: 410 X 310 X 58 (mm)
Working temperature: 0℃~ +40℃
Store temperature: -40℃~ +60℃
1-1 Installation dimension (same as model SH-2200H)
CC-M3C
1-2 Display
10.4”true color LCD, resolution: 640*480
CC-M3 Front panel
CC-M3c
1-3 Keys
Function keys: specific function is up to the current interface. Esc is to cancel or back to the previous menu.
Cursor movement keys: to move the cursor or to move the figure when preview.
Letters keys: mainly to edit the program, or to operate in the auto and manual interfaces.
Fast operation:
1. To revise values, press , then press to clear numbers.
2. Usually for confirm and linefeed.
3. When preview figures, Y to zoom in, Z to zoom out, G to restore.
Switches keys: manually turn on or turn off the external switches
Directions, speed adjustment, torch up/down keys
Up/down, edit, speed adjustment keys
torch up/down, or pageup/down when edit.
F+: speed up
F-: speed down
Del: delete
Ins: insert
Enter: confirm
Start, pause keys
When preheat, extend delay, skip delay.
Upgrade key
press the key and turn on the controller, enter upgrade interface.
Multiple choices
Questo manuale è adatto per i seguenti modelli
1
Indice
