StarTech.com USB100BT Manuale utente

USB to 10/100 Mbps Ethernet Adapter

10/100 Mbps Network Adapter

Installation Manual

USB100BT

Overview

The StarTech.com USB to 10/100 Mbps Ethernet

adapter allows any PC running Windows 98 or 2000 to

connect to an Ethernet network. Its small size and

convenient USB connection allow it to be installed

without opening the computer, making it perfect for

notebook PCs or computers that have all their

expansion slots filled.

The USB100BT is perfect for connecting a notebook PC

to a network or connecting a PC with no available

IRQs on a network.

Features

• Autosenses 10 or 100 Mbps network speed

• Is installed without opening the computer

• Works with Windows 98/2000/ME

• LEDs indicate connection speed, link, and activity

• Supports full duplex ethernet connections

Specifications

USB Standards USB Specification 1.1

Ethernet Standards IEEE 802.3 and 802.3u

Connectors 1x RJ45 and 1x USB type B

LEDs 10/100 Mbps, Link/Activity

Driver Support Windows 98/2000/ME

Dimensions 3.15 x 1.8 x 0.83 inches

(80mm x 46mm x 21mm)

Weight 50g

Operating Temperature 0 - 50 degrees Celsius

Humidity 10 - 90% non-condensing

Certification FCC, CE Mark

Getting Started

This section is to help you prepare the USB100BT for

installation. Please read through this section carefully

before attempting to install the USB100BT.

Unpacking the USB100BT

1 x Ethernet adapter

1 x USB A-B cable

1 x Driver disk

Installation

Hardware Installation

1. Connect the RJ45 connector of the USB adapter to

the 10/100Mbps hub/switch of your LAN by using

a twisted-pair cable (maximum length 100 meters).

Use Category 3, 4 or 5 cable for 10Mbps Ethernet

and Category 5 cable for 100Mbps Fast Ethernet.

2. Connect the USB Type B connector is the USB

adapter and your PC’s or USB Hub’s USB Type A

connector by using the standard USB cable

(maximum length 5m).

Software Installation

The drivers and utilities are supplied on the diskette

included in this package.

Before you install the USB device driver, you must

first make sure that your computer’s USB controller

device has been properly detected and configured

under Windows. Also make sure that the USB port is

enabled. Check your computer’s user’s manual for

more information on how to use the USB port.

1. Start Windows 98/ME. Click “Start”, “Control

Panel”

and “System”.

2. Click “Device Manager” and browse the device list.

Check if the Universal Serial Bus controller device

is present.

Driver Installation

1. Connect the USB Ethernet adapter to the PC.

2. Connect the USB Ethernet adapter to your network’s

hub or switch.

3. The New Hardware Wizard will be displayed.

4. When prompted for the installation medium, check

Floppy Disk Drive and insert the software

driver diskette.

5. Follow the displayed instructions.

6. You will observe several loading status windows.

7. When prompted to restart the PC, remove the driver

diskette and click “Yes”.

Troubleshooting

If you experience any problems with this adapter, first

make sure the appropriate driver is loaded, the proper

cable is connected to the adapter and the hub complies

with the adapter specification; then check the LED.

This adapter provides two LEDs to indicate

network status.

(1) 10M/100M

This LED indicates the connection speed of the USB

Ethernet adapter. When the light is OFF, it indicates

that the 10Mbps UTP connection is established. When

the light is ON, it indicates that the 100Mbps Fast

Ethernet connection is established.

(2) Link/Activity

The Link/Activity LED indicates that the 10/100Mbps

UTP connection has been LINK OK or not. When the

light is OFF, it indicates that the 10/100Mbps port has

not been connected or LINK not OK. When the light is

ON, it indicates that the 10/100Mbps port connection

is OK. When the light is BLINKING, it indicates that

there is traffic flow on the network which the adapter

is connected to.

Indice

Altri manuali StarTech.com Adattatore

StarTech.com

StarTech.com SVID2USB22 Manuale utente

StarTech.com

StarTech.com ZIF2IDE35 Manuale utente

StarTech.com

StarTech.com ECESATUSB1 Manuale utente

StarTech.com

StarTech.com PEXM2SAT32N1 Manuale utente

StarTech.com

StarTech.com DKT30CHVSDPD Manuale utente

StarTech.com

StarTech.com USB32HD2 Manuale utente

StarTech.com

StarTech.com USB32DVIEH Manuale utente

StarTech.com

StarTech.com ICUSB232DB25 Manuale utente

StarTech.com

StarTech.com PCI EXPRESS SERIAL ADAPTER PEX4S952 Manuale utente

StarTech.com

StarTech.com USB2VGA2 Manuale utente

StarTech.com

StarTech.com 8ST102BUSBCMULTIP Manuale utente

StarTech.com

StarTech.com EC1000S Manuale utente

StarTech.com

StarTech.com ICUSBANDR232 Manuale utente

StarTech.com

StarTech.com 117B-USBC-MULTIPORT Manuale utente

StarTech.com

StarTech.com USBBT1EDR2 Manuale utente

StarTech.com

StarTech.com FCREADMICRO3 Manuale utente

StarTech.com

StarTech.com HD2DPVGADVI Manuale utente

StarTech.com

StarTech.com 8STICUSB232SM3 Manuale utente

StarTech.com

StarTech.com WIF2HDMC Manuale utente

StarTech.com

StarTech.com CB511WB Manuale

StarTech.com

StarTech.com WIFI2HDMC Manuale utente

StarTech.com

StarTech.com DP2DVID2 Manuale utente

StarTech.com

StarTech.com PS22USB Manuale utente

StarTech.com

StarTech.com SAT32MSATM Manuale utente

Manuali Adattatore popolari di altre marche

PCB Piezotronics

PCB Piezotronics 090B274 Manuale utente

Auvidea

Auvidea J20 Manuale del prodotto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuale utente

Akribis

Akribis ITF-21-BISS-MIT Manuale utente

Tenda

Tenda W54U Manuale utente

ROHO

ROHO AGILITY Manuale utente

PROLiNK

PROLiNK WN2001 Manuale utente

Hawking

Hawking HUF2 Manuale utente

Airlink101

Airlink101 AWLC4030 Manuale utente

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuale utente

Philips

Philips SWA4554S/10 Manuale utente

JVC

JVC TS-C9D2B Manuale di istruzioni

NETGEAR

NETGEAR A6100 Manuale utente

D-Link

D-Link DWA-121 Manuale utente

Philips

Philips SWA2037 Manuale utente

Basalte

Basalte 0610-20 Manuale utente

Yealink

Yealink EHS40 Manuale utente

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuale utente