StarTech.com SAT3540U2E Manuale utente

Manual Revision: 07/24/2012

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

SAT3540U2E

4 Drive eSATA USB Multi Bay External Hard

Drive Enclosure

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use ofTrademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction............................................................................................1

Packaging Contents ................................................................................................................................. 1

System Requirements.............................................................................................................................. 1

Installation ..............................................................................................2

Hardware Installation .............................................................................................................................. 3

Driver Installation...................................................................................................................................... 4

How to Use ..............................................................................................5

eSATA/USB Connectivity......................................................................................................................... 5

Fan Speed Control .................................................................................................................................... 5

Synchronization Mode............................................................................................................................ 6

Troubleshooting.....................................................................................6

Specications..........................................................................................7

Technical Support ..................................................................................8

Warranty Information............................................................................8

Instruction Manual

Introduction

StarTech.com’s SAT3540U2E External Multi Bay Enclosure is a high-performance 4-drive

SATA enclosure that connects to host systems through eSATA and/or USB.

Packaging Contents

• 1 x SAT3540U2E enclosure

• 1 x Screw driver and screw kit

• 4 x Hard Drive Handles

• 1 x Universal Power Adapter with 3 Power Cords (NA/UK/EU)

• 1 x eSATA cable

• 1 x USB cable

• 1 x Instruction Manual

System Requirements

• USB or eSATA* enabled computer system

• Microsoft® Windows® 2000/XP/Server 2003/Vista /Vista /7, or Apple® Mac OS® X or

Linux®

*If connecting the enclosure to a host computer using the eSATA port, please note

that in order to use some of the RAID modes of the enclosure, the eSATA port on the

host computer system must provide Port Multiplier support. If the eSATA port does

not oer Port Multiplier support, only one of the installed drives will be accessible.

Instruction Manual

Installation

Front View

Rear View

eSATA port

USB port

80mm Cooling Fan

(removable)

Front Door

release

Drive Power/

Activity LED

Fan Switch

Interface Switch

Sync Switch

eSATA/USB Mode LED

Power LED

Power

Button Sync Mode

LED

Fan Speed

LED

eSATA/USB

Link LED

Fan Mode

LED

Instruction Manual

Hardware Installation

1. Secure the included Hard Drive Handles to the hard drives with the supplied screws

and screw driver.

2. Press the front door in to release the latch and open the door. The door is also

removable for easier access.

3. Inside will be a metal drive cage in front of the drive bays. Along the top of the drive

cage are two small tabs. Press them down to release the cage and remove it.

Instruction Manual

4. Remove the card board inserts (if rst time setup) and then insert the hard drives

into the slots. If installing less than 4 drives, ensure a drive is installed in the bottom

slot. This will help when reinstalling the metal cage. Hard drives can be removed

from the enclosure by pressing down on the handles, then pulling them out.

5. Once all of the hard drives are installed, reinstall the metal cage and front door.

Make sure the bottom of the cage stays inside of the track before closing the cover.

6. Connect the power adapter DIN connector into the side of the enclosure and power

up the enclosure.

Driver Installation

Windows 2000/XP/Server 2003/Vista / Vista /7, Mac OS X, Linux

No driver installation is required for these operating systems, as this enclosure is

natively supported, so the drivers are already installed.

Instruction Manual

How to Use

eSATA/USB Connectivity

The enclosure features two separate host interfaces, which can be physically

connected at the same time, however only one will be active at a time. The enclosure

could even be connected to two dierent computers, one over eSATA and the other

over USB, and then switched between. The eSATA and USB Link LEDs, located above

the Power button, will indicate which interfaces are connected, while the eSATA and

USB Mode LEDs will indicate which interface is currently active.

LED Status Description

eSATA connection detection

OFF

ON USB connection detection

OFF

ON eSATA interface active

OFF

ON USB interface active

OFF

To switch between interfaces, press the ‘Interface’ button.

Fan Speed Control

The cooling Smart Fan is automatically controlled by an integrated thermal sensor,

but can also be set manually. The fan is capable of running at 3 dierent speeds

depending on the temperature range of the enclosure (less than 45oC, between 45-

54oC, and greater than 55oC), or set manually to run constantly at one speed.

Instruction Manual

LED Status Description

ON Smart Fan Auto Mode

OFF

ON Smart Fan Manual Mode

OFF

ON Low Speed - 1200RPM

(Manual Mode only)

OFF

ON Medium Speed - 1800RPM

(Manual Mode only)

OFF

ON High Speed - 2500RPM

(Manual Mode only)

OFF

Pressing the ‘Fan’ button will toggle between Auto and Manual modes and toggle

between the dierent manual fan speeds.

Synchronization Mode

This enclosure features a Synchronization Mode that allows it to power o when the

host computer it is connected to is powered o or the interface cable is disconnected.

LED Status Description

Blue When the host connection is o, the enclosure will power

o in 15 seconds.

Orange When the host connection is o, the enclosure will

immediately power o.

OFF The enclosure will only power on/o via the Power

button.

Pressing the ‘Sync’ button will toggle between the dierent modes.

Troubleshooting

Only one drive shows up over eSATA

If only one of the installed hard drives is visible on the computer when connected over

eSATA, ensure that the eSATA port on your computer system supports Port Multiplier

technology.

Instruction Manual

Specications

Bus Interface USB 2.0

SATA 3.0 Gb/s

External Connectors

1 x USB type B

1 x eSATA*

1 x DIN power connector

Chipset Exar XRS10L240

LEDs

3 x Fan Speed

2 x Fan Mode

2 x Interface

2 x Interface Link

1 x Power

1 x Sync Mode

Maximum Data Transfer Rate USB 2.0: 480 Mbps

eSATA: 3.0 Gbps

Fans 1 x 80mm

Number of Hard Drives Up to 4

Hard Drive Compatibility 3.5” SATA 1.5/3.0 Gbps Hard Drives,

tested up to 2.0TB

Power Adapter 12VDC, 5A

Dimensions 215.0mm x 126.0mm x 170.0mm

Weight 1.8kg

Compatible Operating Systems Windows 2000/XP/Server 2003/

Vista/7, Mac OS X, Linux

* eSATA host controller requires Port Multiplier support

Altri manuali per SAT3540U2E

Indice

Altri manuali StarTech.com Allegato

StarTech.com

StarTech.com InfoSafe S252U2ERR Manuale utente

StarTech.com

StarTech.com SAT1810U2 Manuale utente

StarTech.com

StarTech.com S251BU31REMD Manuale utente

StarTech.com

StarTech.com S251BU31315 Manuale utente

StarTech.com

StarTech.com SAT3540ER2 Manuale utente

StarTech.com

StarTech.com SAT2510BU2E Manuale utente

StarTech.com

StarTech.com SAT3550ESR Manuale utente

StarTech.com

StarTech.com INFOSAFE IDE2510U2 Manuale utente

StarTech.com

StarTech.com SAT1810U2 Manuale utente

StarTech.com

StarTech.com RK123WALHM Manuale utente

StarTech.com

StarTech.com RK9WALM Manuale utente

StarTech.com

StarTech.com S252SMTB3 Manuale utente

StarTech.com

StarTech.com RK2536BKF Manuale utente

StarTech.com

StarTech.com S251BU31REM Manuale utente

StarTech.com

StarTech.com S351BMU33ET Manuale utente

StarTech.com

StarTech.com S2510U2WF Manuale utente

StarTech.com

StarTech.com S252BU313R Manuale utente

StarTech.com

StarTech.com RK1224WALHM Manuale utente

StarTech.com

StarTech.com RK1219WALL Manuale utente

StarTech.com

StarTech.com S3510BMU33ET Manuale del sistema

StarTech.com

StarTech.com SAT3520U2ER Manuale utente

StarTech.com

StarTech.com HSB2535SATBK Manuale utente

StarTech.com

StarTech.com INFOSAFE SAT2510U2 Manuale utente

StarTech.com

StarTech.com InfoSafe IDECASE25OTG Manuale utente

Manuali Allegato popolari di altre marche

SilentiumPC

SilentiumPC Armis AR5 Manuale

Pulsar

Pulsar 17/TRP80/DSPR Manuale utente

Thermaltake

Thermaltake V150 TG Manuale utente

MSI

MSI MPG SEKIRA 500X Manuale utente

Antec

Antec Dark fleet DF-10 Manuale utente

Nexans

Nexans WTC05 Manuale utente

Peavey

Peavey DS 1502 Manuale utente

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuale utente

Rosewill

Rosewill RX82-U(JBOD) Manuale utente

QNAP

QNAP SAS JBOD CLI 1.0 Manuale utente

GAMDIAS

GAMDIAS Talos P1 Manuale utente

Auvs

Auvs KR615 Manuale utente

Digitus

Digitus DA-71114 Manuale utente

CommScope

CommScope FDH 3000 Manuale utente

FS FHD-FWME4 Manuale utente

JBL

JBL CS1215T Manuale utente

Pulsar

Pulsar ARAD-S4 Manuale utente

Pulsar

Pulsar AWO454 Manuale utente