StarTech.com VS421HDPIP Manuale utente
Manual Revision: 03/22/2018
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
VS421HDPIP
4x1 HDMI Matrix Switch with Picture-in-Picture –
1080p
*actual product may vary from photos
Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s
authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
i
Table of Contents
Product Diagram ....................................................................................1
Front View .................................................................................................................................................... 1
Rear View...................................................................................................................................................... 1
Introduction............................................................................................2
Packaging Contents ................................................................................................................................. 2
System Requirements.............................................................................................................................. 2
Specications..........................................................................................3
Technical Support ..................................................................................4
Warranty Information............................................................................4
Instruction Manual
1
Introduction
Packaging Contents
• 1x 4-Port HDMI Switch w/PAP
• 1x Remote Control
• 2x Mounting brackets
• 1x Universal Power Adapter (NA/UK/EU)
• 1x Instruction Manual
System Requirements
• Up to 4 x HDMI-enabled Video Source Devices (i.e. computer, Blu-ray Player)
• Up to 1x HDMI-enabled Display Devices (i.e. television, projector)
• Up to 5x M/M HDMI cables for your display, and video sources
Instruction Manual
2
4
1
235
6
1
2
3
4
7
5
6
Product Diagram
Front View
1. IR Sensor
2. Power Button / LED
3. Menu Button / LED
4. Menu Operation Buttons / LEDs
5. Input Selection Buttons / LEDs
6. Picture-in-Picture Selection Buttons / LEDs (A-H)
7. All Display Operation Buttons / LEDs (E-H)
Back View
1. HDMI Input Ports
2. HDMI Output Port
3. LAN Port
4. USB Service Port
5. DB9 Service Port
6. Power Adapter Port
Instruction Manual
3
Hardware Installation
1. Connect up to four HDMI cables (not included) from each of your HDMI video
source devices (i.e. computers, Blu-ray Players) to each of the HDMI input ports on
the matrix switch.
2. Connect up to an HDMI cable (not included) from the HDMI output port on the
matrix switch to the HDMI input port on your display device (i.e. televisions,
projectors).
3. Connect the power adapter from an available power outlet to the Power adapter
port the Matrix switch.
4. (Optional) If you would like to control your Matrix Switch over your network,
connect a network cable (not included) from the LAN port on the matrix switch to
an available LAN port on your network device.
Hardware Operation
Full Screen Display Operation
1. Press the Output select button (that corresponds with the numbered output
display) you wish to select.
2. Your selected video input will now be displayed on your video output.
Dual Mode Picture-in-Picture Operation
1. Select your primary video input, by pressing the Output select button (that
corresponds with the numbered output display) you wish to select.
2. Press the Picture-in-Picture Selection Button (A through D) that corresponds with
your desired secondary video output.
Note: A through D represents video Inputs 1 through 4 respectively.
3. Your secondary display is displayed along with your primary display.
All Input Display Operation
1. Press the All Display button (E through H) that corresponds with your desired
display conguration.
2. All Video sources will now display in your desired video output.
Note: The Audio output will be the source device connected to Input 1.
Instruction Manual
4
On Screen Display Menu
The OSD menu gives you access to advanced functionality. The below table lists
each OSD menu option. The description eld outlines the functionality of each menu
selection.
Instruction Manual
5
Main Menu Sub Menu Sub
Menu Adjustments Default Description
I/O Setup
Output Resolution
480P, 579P,
720P50/60,
1080P24/25/
30/50/60,
1024x768,
1280x800,
1280x1024,
1366x768,
1440x900,
1600x900,
1600x1200,
1680x1050,
1920x1200,
NATIVE
720p60
Enables you
to select your
desired output
resolution.
Menu Back Returns to
main menu.
OSD Settings
Info display On/O O
H Oset 0~20 (5) 5 Enables you
to adjust the
specied
attributes in
relation to
the On the
Screen display
positioning
and operation.
Note: TIMEOUT
=OFF means
MENU and
INFO will
continue
showing on
the screen
V Oset 0~20 5
Timeout O~50 O
Gain 0~10 2
Menu Back Returns to
previous menu.
Menu Exit Returns to
main menu.
Instruction Manual
6
Image Adjust
Brightness
Adjust
CH 1 0~100 50
Enables you
to adjust the
specied
attributes for
your desired
picture quality.
CH 2 0~100 50
CH 3 0~100 50
CH 4 0~100 50
Contrast
Adjust
CH 1 0~100 50
CH 2 0~100 50
CH 3 0~100 50
CH 4 0~100 50
Value Reset
Restores
default image
settings.
Menu Exit Returns to
Main Menu.
Window
Setup
Channel 1
Select
Size
CH1 Wxxx Hxxx
Enables you
to physically
dene the size
of the video
source on your
display.
Width Unit
Width Ten
Width Hundred
Height Unit
Height Ten
Height Hundred
Position
CH1 Hxxx Vxxx
Enables you
to physically
dene the
position of the
video source
on your display.
Horizontal Unit
Horizontal ten
Horizontal Hundred
Vertical Unit
Vertical Ten
Vertical Hundred
Instruction Manual
7
Window
Setup
Channel 1
Select
Image
Output On/O On
Enables or
disables the
output of the
specic video
source.
Priority
CH1->4, CH2 -> 3,
CH 3->2, CH4->4
CH1->4,
CH2 -> 3,
CH 3->2,
CH4->4
Enables you
to dene the
device priority
for automatic
switching.
Window Reset
Restores
your default
settings for
the specied
source
device.
Menu Exit Returns to
Main Menu.
Channel 2
Select
Size
CH1 Wxxx Hxxx
Enables you
to physically
dene the
size of the
video source
on your
display.
Width Unit
Width Ten
Width Hundred
Height Unit
Height Ten
Height Hundred
Position
CH1 Hxxx Vxxx
Enables you
to physically
dene the
position of
the video
source on
your display.
Horizontal Unit
Horizontal ten
Horizontal Hundred
Vertical Unit
Vertical Ten
Vertical Hundred
Altri manuali per VS421HDPIP
1
Indice
Altri manuali StarTech.com Commutatore a matrice
StarTech.com
StarTech.com VS421HDPIP Manuale utente
StarTech.com
StarTech.com VS420RDVIA Manuale utente
StarTech.com
StarTech.com VS424HD4K60 Manuale utente
StarTech.com
StarTech.com VS222HD4K Manuale utente
StarTech.com
StarTech.com ST424HDBT Manuale utente
StarTech.com
StarTech.com STHDBTRX Manuale utente
StarTech.com
StarTech.com VS424HDPIP Manuale utente
StarTech.com
StarTech.com ST424MX Manuale utente
StarTech.com
StarTech.com VS222HDQ Manuale utente
