STATESMAN BIW0814 Manuale utente
BIW0814
BUILT-IN 8KG 1400RPM WASHING MACHINE
Instruction Manual
Please read these instructions carefully before use and retain for future reference.
Before switching on your appliance – Always check for any damage that may have
been caused in transit.
2
CONTENTS
Important Safety Instructions ................................ 3-5
Product Overview ........................................................6
Technical Specication...............................................6
Product Fiche...............................................................7
Installation.............................................................. 8-12
- Unpacking the Washing Machine ..............................8
- Remove Transport Bolts ............................................8
- Leveling the Washing Machine ..................................8
- Connect the Water Supply Hose ...............................8
- Built-in Installation ............................................... 9-12
Operating Instructions ........................................ 13-23
- Calibration................................................................13
- Before Each Wash ...................................................14
- Detergent Dispenser ................................................15
- Detergent Recommendation....................................16
- Control Panel ...........................................................17
- Programs ........................................................... 18-21
- Functions ........................................................... 22-23
Cleaning & Maintenance..................................... 24-25
Troubleshooting Guide & Error Codes.....................26
Disposal Information.................................................27
3
SAFETY INSTRUCTIONS
Please read the following safety information thoroughly and follow it strictly to minimize the risk
of re or explosion, electric shock and to prevent property damage, personal injury or loss of life.
Failing to follow these instructions shall void any warranty.
Safety Indicator Key:
WARNING! = indicates a potentially dangerous situation which may result in death or serious
injury unless it’s avoided.
CAUTION = indicates a potentially dangerous situation which may result in slight or minor injury
or damage to property and the environment.
NOTE: = indicates a potentially dangerous situation which may result in slight or minor injury.
WARNING! Electric shock hazard
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent or a
qualied technician in order to avoid a hazard.
• If the machine is damaged, it must not be operated unless repaired by the manufacturer, its
service agent or a qualied technician.
• The appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
• Children should be supervised so that they do not play with the appliance.
• Children 3 years and under shall be kept away from the appliance or be continuously supervised.
• Animals and children may climb into the machine. Check the machine before every operation.
• Do not climb or sit on the appliance.
INSTALLATION LOCATION
• Any washing powders, detergents, tablets or other such substances are to be kept in a safe
place out of the reach of children.
• Do not install the machine on a carpet oor to prevent any obstruction of openings which could
damage the machine.
• Keep the appliance clear from any heat source and direct sunlight to avoid plastic and rubber
parts corroding.
• Do not use the appliance in humid environments.
• The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge
on the opposite side to that of the washing machine.
• Do not operate the machine in rooms with a temperature of below 5°C, as this could lead to
certain parts being damaged. If it is unavoidable, make sure to drain the water completely
from the appliance after every use (see ‘Maintenance - Cleaning of drain pump lter’) to avoid
damages caused by frost.
• Never use ammable sprays or substances in the immediate proximity of the appliance.
4
INSTALLATION
• Remove all packaging material and transport bolts before using the appliance. Otherwise this
could lead to serious damage to the appliance.
• This appliance is equipped with a single inlet valve and can be connected to the cold water
supply only.
• Mains plug must be accessible after installation.
• Before washing clothes for the rst time, the machine should be run on the cotton program at
90°C without any laundry or detergent inside.
• Before using the washing machine, the appliance shall be calibrated.
• Do not put any excessively heavy objects on the appliance, like water containers or heating
devices.
• Ensure the new hose-sets supplied with the appliance are used and that any existing hose-sets
are replaced.
• Max. Inlet water pressure 1 MPa. Min. inlet water pressure 0.05 MPa.
ELECTRICAL CONNECTION
CAUTION! Make sure the power cord is not trapped by the machine, as this could lead to
damages.
• Connect the product to a grounded outlet protected by a fuse complying with the values in
the “ Technical specications“ table. The grounding installation has to be made by a qualied
electrician. Ensure that the machine is installed in accordance with the local regulations.
• Water and electrical connections must be carried out by a qualied technician in accordance
with the manufacturer‘s instructions and local safety regulations.
WARNING!
• Don’t use multiple plugs or extension cords.
• The appliance must not have an external switching device such as a timer or connected to
a circuit that is regularly switched on and o.
• Do not pull the plug out of the mains outlet if there is ammable gas around.
• Never pull out power plug with wet hands.
• Always pull at the plug, not at the cable.
• Always unplug the appliance if it is not being used.
WATER CONNECTIONS
• Check the connections of the water inlet tubes, the water tap and the outlet hose for possible
problems due to changes of water pressure. If the connections loosen or leak, close the water
tap and get it repaired. Do not use the appliance before the pipes and hoses are installed
properly by a qualied technician.
• The glass door may become very hot during the operation. Keep children and pets far away from
the machine while it is operating.
• The water inlet and outlet hoses have to be safely installed and remain undamaged. Otherwise,
water leakage can occur.
• Do not remove the drain pump lter while there is still water in the appliance. Big quantities of
water can leak out, and there is a risk of scalding due to hot water.
5
OPERATION AND MAINTENANCE
• Never use any ammable, explosive or toxic solvents. Do not use gasoline and alcohol etc. as
detergents. Only select detergents that are suitable for machine washing.
• Make sure that all pockets are emptied. Sharp and rigid items such as coins, brooches, nails,
screws, stones etc. may cause serious damage to this machine.
• Remove all objects from pockets such as lighters and matches before using the appliance.
• Thoroughly rinse items that have been washed by hand.
• Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol,
kerosene, spot removers, turpentine, wax and wax removers should be washed in hot water with
an extra amount of detergent before being washed in the appliance.
• Items containing foam rubber (latex foam), shower caps, water proof textiles, rubber backed
articles and clothes or pillows tted with foam rubber pads should not be washed in the machine
• Fabric softeners or similar products should be used as recommended in their instructions.
• Never try to open the door forcefully. The door will unlock shortly after the end of a cycle.
• Please do not close the door with excessive force. If it is dicult to close the door, please check
if the clothes are properly inserted and distributed within the drum.
• Always unplug the appliance and close the water tap before cleaning and maintenance and after
each use.
• Never pour water over the appliance for cleaning purpose. Risk of electric shock!
• Repairs shall only be carried out by the manufacturer, its service agent or a qualied technician in
order to avoid a hazard. The manufacturer will not be held responsible for any damages caused
due to attempted repairs carried out by unqualied persons.
TRANSPORT
• Before Transport:
- Bolts shall be reinstalled to the machine by a qualied technician
- Accumulated water shall be drained out of the machine
CAUTION! This appliance is heavy. Transport with care. Never hold any protruding part of the
machine when lifting. The machine door cannot be used as a handle.
INTENDED USE
• The product is intended only for home use and for textiles in household amounts suitable for
machine washing. This appliance is for indoor use only. Only use according to these instructions.
The appliance is not intended for commercial use.
• Any other use is considered as improper use. The manufacturer is not responsible for any
damage or injuries that may be caused as a result.
• This appliance is intended to be used in household and similar applications such as:
- Sta kitchen areas in shops, oces and other working environments;
- Farm houses;
- Bed and breakfast type environments;
- Areas for communal use in blocks of ats or in launderettes.
PACKAGING/OLD APPLIANCE
This marking indicates that this product should not be disposed with other household
wastes throughout the EU and UK. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the
collection systems or contact the retailer where the product was purchased. This will
help to ensure that the appliance is recycled in an environmentally safe manner.
6
PRODUCT OVERVIEW
Detergent Drawer Control Panel
Door
Power Plug
Outlet Hose
Filter
Accessories
Transport
Hole Plug
Supply Hose
Cold Water
Drain Hose
Support
Supply Hose
Hot Water
Instruction
Manual
TECHNICAL SPECIFICATION
Model BIW0814
Power Supply 220-240V~,50Hz
MAX. Current 10A
Standard Water Pressure 0.05MPa~1MPa
Washing Capacity 8.0kg
Dimensions (mm) H:825 x W:595 x D:540
Net Weight 63kg
Rated Power 1950W
7
Supplier’s name or trade mark (a) (c): Statesman
Supplier’s address (a) (c): 38 Bluestem Road, Ransomes Industrial Estate, Ipswich, Suolk, IP3 9RR
Model Identier (a): BIW0814
General product parameters:
Parameter Value Parameter Value
Rated capacity (b) (kg) 8.0 Dimensions in cm (a) (c)
Height 83
Width 60
Depth 54
Energy eciency index (b) (EEIW)60.0 Energy eciency class (b)B (D)
Washing eciency index (b)1.031 Rinsing eectiveness (g/kg) (b)5.0
Energy consumption in kWh per kg per cycle,
based on the eco 40-60 program. Actual
energy consumption will depend on how the
appliance is used.
0.545
Water consumption in litre per cycle, for
the eco 40-60 program. Actual water
consumption will depend on how the
appliance is used and on the hardness of
the water
48
Maximum temperature inside the treated
textile (b) (°C)
Rated
capacity 37
Weighted remaining moisture
content (b) (%) 53.9
Half 33
Quarter 23
Spin Speed (b) (rpm)
Rated
capacity 1400
Spin-drying eciency class (b)B (d)
Half 1400
Quarter 1400
Program duration (b) (h:min)
Rated
capacity 3:38
Type Built-in
Half 2:48
Quarter 2:48
Airborne acoustical noise emissions during
the spinning phase (a) (dB(A) re 1 pW) 76 Airborne acoustical noise emission
class (b) (spinning phase) B (d)
O-Mode (W) (if applicable) 0.50 Standby Mode (W) (if applicable) 1.00
Delay Start (W) (if applicable) 4.00 Networked standby (W) (if applicable) N/A
Minimum duration of the guarantee oered by the supplier (a) (c)
This product has been designed to release silver ions during the
washing cycle NO
Additional information:
Weblink to the supplier’s website, where the information in point 9 of Annex II to Commission Regulation (EU) 2019/2023 (1) is found:
(a) this item shall not be considered relevant for the purposes of Article 2(6) of Regulation (EU) 2017/1369
(b) for the eco 40-60 programme
(c) changes to this item shall not be considered relevant for the purposes of paragraph 4 of Article 4 of Regulation (EU) 2017/1369
(d) if the product database automatically generates the denitive content of this cell the supplier shall not enter these data
PRODUCT FICHE
NOTE:
1. The actual energy consumption will depend on how the appliance is used.
2. The actual water consumption will depend on how the appliance is used and on the hardness of the water.
Product Data Sheet concerning (EU) 2019/2014
The product data sheet for your appliance can be found online.
Go to https://eprel.ec.europe.eu and enter the model identier for your appliance to download the data sheet.
The model identier for your appliance can be found in the technical specications section.
8
WARNING!
• Stability is important to prevent the product from moving. Make sure
the machine is level and stable.
• Make sure that the product does not stand on the power cord.
• Make sure to maintain the minimum distances from the walls as
shown in the picture.
Before installing the machine, the location characterised as follows shall be
selected:
1. Rigid, dry, and level surface
2. Avoid direct sunlight
3. Sucient ventilation
4. Room temperature is above 0°C
5. Keep far away from any heat sources such as coal or gas burning
appliances.
UNPACKING THE WASHING MACHINE
WARNING!
• Packaging material (e.g. Films, Styrofoam) can be dangerous for
children.
• There is a risk of suocation! Keep all packaging well away from
children.
1. Remove the cardboard box and Styrofoam packing.
2. Lift the washing machine and remove the base packaging. Make sure the
small triangle foam (a) is removed with the bottom packaging together. If
not, lay the unit down on the side surface and remove it manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
INSTALLATION
WW
W ≥ 20mm
a
REMOVE TRANSPORT BOLTS
WARNING! You must remove the transport bolts from the back of the machine before use.
Loosen the 4 transport
bolts with a spanner.
Remove the bolts including
the rubber parts and keep
them for future use.
Close the holes using
the cover caps.
9
LEVELLING THE WASHING MACHINE
WARNING! The lock nuts on all four feet must be screwed tightly against the housing.
1. Loosen the lock nut.
2. Turn the foot until it reaches the oor.
3. Adjust the legs and lock the nuts with a spanner. Make sure the
machine is level and steady.
CONNECT THE WATER SUPPLY HOSE
WARNING! To prevent leakage or water damage, follow the instructions in this chapter.
Do not kink, crush or modify water inlet hose.
Connect the water supply
hose to the water inlet valve
and a water tap with cold
water as indicated.
NOTE: Connect manually, do not use tools. Check if the connections are tight.
DRAIN HOSE
WARNING! Do not kink or protract the drain hose. Position drain hose properly,
otherwise damage might be a result of water leakage.
Connect the end of the drain hose as per the diagram below:
Washing
Machine
Drain Hose
Indirect connection
Standpipe
Trap
(may not be
permitted
below oor)
45cm min
to
75cm max
(some areas)
15cm min
to
45cm max
Waste
Pipe
10
BUILT-IN INSTALLATION
Appendix
Self-tapping
screws (ST4*12)
Self-tapping
screws (M5*12) Hinges Counter magnet Spacer Fixed position
paper
Tools Required (not supplied)
Screw driver Automatic driver Ruler Pencil
Install Steps
Overview:
Preparation and assembly of the door:
The door opens from left to right The door opens from right to left
Indice
Altri manuali STATESMAN Rondella
