Stealth Products I-Drive 4.0 Guida

USER MANUAL

i-Drive®4.0

Stealth’s User Manual and Maintenance Guide for i-Drive 4.0

Alternative Control with Bluetooth® Wireless Technology

Alternative Drive Controls

Customer Satisfaction 1.0

Stealth Products strives for 100% customer satisfaction. Your complete

satisfaction is important. Please contact us with feedback or suggested

changes that will help improve the quality and usability of our products.

You may reach us at:

General

Read and understand all instructions prior to the use of the product. Failure to

adhere to any recommendations and warnings in this document may result in

property damage, injury, or death. Product misuse due to failure of following

any instructions will void the warranty.

Immediately discontinue use if any function is compromised, parts are missing,

loose, or shows signs of excessive wear. Consult with your supplier for repair,

adjustment, or replacement.

If this document contains information you do not understand, or there are

concerns about safety or operation, contact your supplier.

Google, the Google Logo and Google Play Logo are registered trademarks of Google Inc. Apple Logo

and the AppStore Logo are registered trademarks of Apple Inc.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and

any use of such marks by Stealth Products, LLC is under license. Other trademarks and trade names

are those of their respective owners.

MDSS GmbH

Schiffgraben 41

30175 Hannover, Germany

Stealth Products, LLC

104 John Kelly Drive, Burnet, TX 78611

Phone: (512) 715-9995 Toll Free: 1(800) 965-9229

Fax: (512) 715-9954 Toll Free: 1(800) 806-1225

[email protected] www.stealthproducts.com

Important Information 2.0

Important Information!

All persons responsible for fitting, adjustment, and daily use of the devices

discussed in these instructions must be familiar with and understand all safety

aspects of the devices mentioned. In order for our products to be used

successfully, you must:

 Read and understand all instrucons and warnings.

 Maintain our products according to our instrucons on care and maintenance.

 Devices should be installed and adjusted by a trained technician.

All programming and configurations MUST be completed by a certified ATP or

trained technician.

This user manual contains programming instructions and statements that are

meant to be followed by a certified ATP or trained technician.

Supplier Reference

Supplier:

Telephone:

Address:

Purchase Date:

Model:

iii

Introduction 3.0

Before you install or begin using this product, it is important that you read and

understand the content of this user manual and its warnings. This user manual

will guide you through the options and possibilities with the product.

Information in this manual is written with the expressed intent of use with

standard configurations. They also contain important safety and maintenance

information, as well as describe possible problems that can arise during use.

For further assistance, or more advanced applications, please contact your

supplier or Stealth Products at (512) 715-9995 or toll free at 1-800-965-9229.

Always keep the user manual in a safe place so it may be referenced as

necessary.

All information, pictures, illustrations, and specifications are based on the

product information that was available at the time of printing. Pictures and

illustrations shown in this manual are representative examples and are not

intended to be exact depictions of the various parts of the product.

Ordering Documentation

You can download additional copies of this user manual on the Stealth website:

https://stlpro.site/stealth-docs

and search: i-Drive 4.0 User Manual in the search bar at the top of the page.

CAUTIO N

These products are designed to be fitted, applied, and installed exclusively by a

health care professional trained for these purposes. The fitting, application and

installation by a non-qualified individual could result in serious injury.

Warranty 4.0

Our products are designed, manufactured, and produced to the highest of

standards. If any defect in material or workmanship is found, Stealth Products

will repair or replace the product at our discretion. Any implied warranty,

including the implied warranties of merchantability and fitness for a particular

purpose, shall not extend beyond the duration of this warranty. Stealth

Products, LLC does not warrant damage due to, but not limited to:

Misuse, abuse, or misapplicaon of products.

Modicaon of product without wrien approval from Stealth Products, LLC.

Any alteraon or lack of serial number, where applicable, will automacally

void this warranty.

Stealth Products, LLC is liable for replacement parts only.

Stealth Products, LLC is not liable for any incurred labor costs.

No person is authorized to alter, extend, or waive the warranties of Stealth

Products, LLC.

Stealth Products warrants against failure due to defective materials

or workmanship:

Covers: 2 years

Hardware: 5 years

Electronics: 3 years

In Case of Product Failure

In the event of product failure covered by our warranty, please follow the

procedures outlined below:

1. Call Stealth at +1 (512) 715-9995 or toll free +1-800-965-9229.

2. Request the Returns Department or obtain an RA from the Returns Department and

follow department or documentaon instrucons.

FCC Statement 5.0

Federal Communications Commission (FCC) Statement (USA)

FCC ID: 2AJXVIDHBT500

FCC RF Exposure Statement

This device meets the FCC requirements for RF exposure in public or

uncontrolled environments.

This device complies with FCC part 15 FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operaon.

FCC Warning

Changes or modifications not approved by Stealth Products, LLC could void the

user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for

Class B digital device, pursuant to part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the

following measures:

 Reorient or relocate the receiving antenna

 Increase the separaon between the equipment and receiver

 Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected

 Consult the dealer or an experienced radio/TV technician for help

Table Of Contents 6.0

1.0 Customer Satisfaction.................................................................................... i

2.0 Important Information ................................................................................. ii

3.0 Introduction .................................................................................................. iii

4.0 Warranty........................................................................................................ iv

5.0 FCC Statement ............................................................................................... v

6.0 Table Of Contents ........................................................................................ vi

7.0 Warning Labels ........................................................................................... viii

7.1 Warning Labels ........................................................................................................... viii

7.2 Limited Liability........................................................................................................... viii

7.3 Testing............................................................................................................................ viii

8.0 Index ................................................................................................................ 1

9.0 System Requirements .................................................................................... 3

9.1 i-Drive Minimum System Requirements .............................................................. 3

9.2 i-Drive Bluetooth Minimum System Requirements ......................................... 3

9.3 EMC Requirements ....................................................................................................... 3

10.0 Design and Function................................................................................... 4

10.1 Intended Use ............................................................................................................... 4

10.2 Features......................................................................................................................... 4

10.3 Factory Settings........................................................................................................... 5

11.0 Parts and Accessories .................................................................................. 6

11.1 i-Drive Packages Available...................................................................................... 6

11.2 Replacement/Additional Parts Available........................................................... 6

12.0 Advanced Programming Software ........................................................... 7

12.1 i-Drive Advanced Programming Software........................................................ 7

12.2 Getting Started ........................................................................................................... 7

12.3 Downloading the i-Drive Software to Your PC.............................................. 7

12.4 Connecting to the i-Drive ....................................................................................... 9

12.5 Running Real Time Diagnostics ..........................................................................10

vii

Table Of Contents 6.0

12.6 Help Feature............................................................................................................... 11

12.7 Closing the i-Drive Programming Software .................................................. 12

13.0 i-Drive Mobile App Installation ...............................................................13

13.1 Downloading the i-Drive Bluetooth® Application .................................... 13

For iPhone Users................................................................................................ 13

For Android Users ............................................................................................. 14

13.2 Opening the i-Drive Bluetooth® App.............................................................. 15

13.3 Diagnostics................................................................................................................ 17

14.0 Testing ........................................................................................................ 18

14.1 Operational Test ...................................................................................................... 18

14.2 Test Drive.................................................................................................................... 18

15.0 First Time Use ............................................................................................19

15.1 Dealer Assistance .................................................................................................... 19

15.2 User Testing .............................................................................................................. 19

15.3 Conditions Of Use .................................................................................................. 19

16.0 Maintenance................................................................................................20

16.1 Care And Maintenance ........................................................................................ 20

16.2 Safety ......................................................................................................................... 20

16.3 Technical Data ........................................................................................................... 20

viii

Warning Labels 7.0

Warning Labels 7.1

Warnings are included for the safety of the user, client, operator and property. Please

read and understand what the signal words SAFETY, NOTICE, CAUTION, WARNING

and DANGER mean, how they could affect the user, those around the user, and property.

Limited Liability 7.2

Stealth Products, LLC accepts no liability for personal injury or damage to property that

may arise from the failure of the user or other persons to follow the recommendations,

warnings, and information in this manual.

Stealth Products does not hold responsibility of final integration of final assembly of

product to end user. Stealth Products is not liable for user death or injury.

Testing 7.3

Initial setup and driving should be done in an open area free of obstacles until the user is

fully capable of driving safely.

The i-Drive should always be programmed and tested without any person sitting in the

wheelchair until every alteration of the physical installation or adjustment is complete.

NOTICE

Identifies important information not related to injury, but

possible property damage.

SAFETY

Indicates steps or instructions for safe practices, reminders of

safe procedures, or important safety equipment that may

be necessary.

CAUTI ON Identifies a potential situation which (if not avoided) will

result in minor to moderate injury,and property damage.

WA RNIN G Identifies a potential situation which (if not avoided) will

result in severe injury, death,and property damage.

DANGER Identifies an imminent situation which (if not avoided) will

result in severe injury, death,and property damage.

Index 8.0

Configurable Parameters-There is only one additional configurable parameter in the

i-Drive configuration application for switched inputs, sensor sensitivity.

Sensor Sensitivity–This parameter shifts the position of the switch no-change region. A

higher value therefore means that a switch will always be interpreted as ON, whereas a

lower value means that a switch will almost always be interpreted as OFF.

Proportional Input Controls–Proportional inputs can be assigned to proportional

functions such as forward/reverse (F/R) and left/right (L/R). If the proportional input is

determined to be nonzero it will be output to the chair.

Configurable Parameters-Proportional inputs have the following additional configurable

parameters. Not that it is best to handle these by first calibrating the input through

‘Joystick Calibration’ in the i-Drive configuration applications.

Dead Band Region-This may be used to define the dead band low and high relative to

the proportional limits minimum, center, and maximum. Calibration is required in order

to calculate the center voltage.

Calibration-This feature is accessible directly through Config Mode rather than the

Channels menu after a proportional function has been assigned. The calibration

procedure calculates the center voltage as well as the recommended values for the

proportional region and dead band region based on user input.

Linked Left-Right-The left and right inputs can be linked so the chair moves forward

when both are engaged. This feature may be enabled under the sensor settings for ‘Left’

or ‘Right’ in the i-Drive Mobile apps, or by selecting ‘Linked Left and Linked Right’ to the

respective channels in the i-Drive Programmer Windows application

Multi-Tap-The i-Drive system implements an extended double-tap timer to

accommodate clients who need a longer double-tap input time. The double-tap exten-

sion time is shared with the triple-tap activation time in mouse mode, hence the name

‘Multi-Tap’.

Altri manuali per i-Drive 4.0

Indice

Altri manuali Stealth Products Controllori

Stealth Products

Stealth Products IDHBT500 Manuale

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente

Stealth Products i-Drive 4.0 Guida

Manuali Controllori popolari di altre marche