QUICK SET-UP GUIDE:
• DEVICE BATTERY CHARGES WITH SIMCARD INSIDE ONLY
• IT WAS NOT DEVELOPED FOR 220v CONTINOUS USAGE
• CALLBACK FUNCTION ACTIVATION SMS „1111“ and DEACTIVATION SMS „0000“
• IF THE BATTERY IS COMPLETELY DISCHARGED IT TAKES UP TO 3 MINUTES TO START CHARGING
IMPORTANT:
STEP 1
SETTING UP
PLUG in the device with the SIMCARD inside and wait for it to charge. The device is charging when the red diode
is on. Device takes several hours to charge, depending on your baery capacity.
STEP 2
USING THE PRODUCT
Unplug the device from the electricity and give the device 10seconds to boot up. You are now able to call the de-
vice, device itself will pick up the sound and you will hear from 5-10 range in what is going.
STEP 3
CALL BACK ACTIVATION
The callback funcon can be acvated by „1111“ and deacvated „0000“
DIODE FLASHING SIGNALS:
• PUT SIMCARD IN: 3x ashes
• PUT CHARGER IN : Connuous red light unl baery is full (THEN IT TURNS OFF)
• LOW BATTERY: Constant blinking
