Stealth B-52 Manuale utente

STEALTH B-52

STEALTH F-37

STEALTH H-52

STEALTH P-7

V2.4

STEALTH ELECTRIC BIKES OWNER’S MANUAL

V 2.4 PAGE | 2

CONGRATULATIONS!

Welcome to the Stealth Electric Bike community and congratulations on your purchase.

Stealth Electric Bikes redefine the ride experience. They are considered by peers to be the world’s toughest and most

powerful hybrid electric bikes.

Featuring heavy duty suspension, 2-hour charge time, silent operation and zero emissions, using your Stealth Electric Bike

will turn every ride into an adventure.

Ready for flight?

Stealth Electric Bikes manufacture a range of e-bikes so this manual may contain some information that does not apply to

your bike. Some illustrations may vary from your actual bike.

If you have any questions after reading the information in this manual, consult your local dealer.

STEALTH ELECTRIC BIKES OWNER’S MANUAL

V 2.4 PAGE | 3

IMPORTANT:

This manual contains important safety, performance and service information. Read it before you take the first ride on your

new Stealth Bike, and keep it for future reference.

Additional safety, performance and service information for specific components such as transmission, suspension or brakes

on your bike may also be available. Make sure that your dealer has given you all the manufacturers’ literature that was

included with your bike or accessories. In case of a conflict between the instructions in this manual and information

provided by a component manufacturer, always follow the component manufacturer’s instructions.

To the best knowledge of Stealth Electric Bikes, the material contained herein is accurate as of the date this publication was

approved for printing. Stealth Electric Bikes reserves the right to change specifications, equipment, or designs at any time

without notice and without incurring obligation. Illustrations in this manual are merely for demonstration purposes and

may not exactly match the detail described.

NOTE: This manual is not intended as a comprehensive use, service, repair or maintenance manual. Please see your dealer

for all service, repairs or maintenance. Your dealer may also be able to refer you to classes, clinics or books on bike use,

service, repair or maintenance.

Please read entire manual before riding your Stealth Electrical Bike

STEALTH ELECTRIC BIKES OWNER’S MANUAL 
V 2.4 PAGE | 4 
 
CONTENTS 
PRODUCT REGISTRATION............................................................................................................................................................. 5 
GENERAL WARNING..................................................................................................................................................................... 5 
ASSEMBLY .................................................................................................................................................................................... 6 
OUT OF THE CRATE .................................................................................................................................................................. 6 
BATTERY ..................................................................................................................................................................................... 17 
RANGE.................................................................................................................................................................................... 18 
CHARGING.............................................................................................................................................................................. 18 
BATTERY CARE........................................................................................................................................................................ 19 
STORING BATTERY AND STEALTH BIKE FOR LONG PERIODS ................................................................................................. 20 
BEFORE RIDING YOUR BIKE........................................................................................................................................................ 21 
YOUR FIRST RIDE ........................................................................................................................................................................ 22 
IMPORTANT COMPONENTS AND CONTROLS ........................................................................................................................ 22 
DC-1 AND ELECTRONIC SECURITY.......................................................................................................................................... 24 
DC-1 SCREENS ........................................................................................................................................................................ 25 
WHILE RIDING ............................................................................................................................................................................ 31 
TRIP INFORMATION ............................................................................................................................................................... 32 
POWER MODES AND LIMITS.................................................................................................................................................. 32 
RIDING TECHNIQUE................................................................................................................................................................ 36 
RIDING EFFICIENTLY ............................................................................................................................................................... 36 
STEALTH BIKE CARE.................................................................................................................................................................... 38 
CLEANING............................................................................................................................................................................... 38 
ADJUSTING YOUR BIKE........................................................................................................................................................... 38 
MAINTENANCE SCHEDULE..................................................................................................................................................... 42 
TROUBLESHOOTING................................................................................................................................................................... 43 
BMS RESET PROCEDURE ........................................................................................................................................................ 44 
APPENDIX 1: COMPONENT MANUALS....................................................................................................................................... 45 
LIMITED WARRANTY .................................................................................................................................................................. 45 
 
 
 
 
 

STEALTH ELECTRIC BIKES OWNER’S MANUAL

V 2.4 PAGE | 5

PRODUCT REGISTRATION

To receive full warranty support, you must completely fill out the online warranty registration form upon receiving your

bike.

This can be found at: http://www.stealthelectricbikes.com/register-your-stealth-2/

To read Stealth Electric Bikes current limited warranty and related warranty claims information please see the terms at the

end of this manual.

Warranty policies vary depending upon the Stealth Distributor in the country of your purchase. Please check with your

Stealth Dealer or the Stealth Distributor in your country for the warranty policy covering your purchase.

GENERAL WARNING

Action sports involve a risk of injury or death. In choosing to ride a Stealth Bike, you accept that risk and

take responsibility to learn and practise safe and responsible riding.

This e-bike is sold with a limited warranty against defective workmanship. In some countries, it does not

conform to federal motor vehicle safety standards and operation on public roads, streets or highways

and consequently may be illegal to operate. Before operating this vehicle, first determine that its use is

legal in that given area. It’s your responsibility to familiarse yourself with the laws of the areas where

you ride, and to comply with all applicable laws.

The bike is designed and constructed as an operator only model. The load limit and seating configuration

does not safely permit the carrying of passengers.

Do not ignore any warnings displayed in this manual. They indicate a potentially hazardous situation

which, if not avoided, could result in death or serious injury.

STEALTH ELECTRIC BIKES OWNER’S MANUAL

V 2.4 PAGE | 6

ASSEMBLY

OUT OF THE CRATE

Stealth bikes are partially disassembled for packing. Several components must be reassembled before riding. Batteries are

sent separate to the bike for non-Australian customers.

Tools required to assemble the remaining components:

•A set of metric Hex Keys (2, 2.5, 3, 4, 5, 6, 8, 10mm)

•A T25 Torx key

•15mm pedal spanner

•Calibrated torque wrench with hex key attachments

Stealth Electric Bicycles should only be assembled by a skilled mechanic. If you are not confident with

assembling the bike yourself please contact your nearest dealer for assistance.

The bike must be assembled in a safe workspace that is free of volatile materials, water, unauthorised

personal and tripping hazards.

Ensure that the power is switched off and the battery/motor cables are disconnected.

STEALTH ELECTRIC BIKES OWNER’S MANUAL

V 2.4 PAGE | 7

Torque Specifications:

Bolt

Torque (Nm)

Front axle

Check the manufactures specifications

Axle lockout

Rear axle nuts

Stem handlebar clamp

12.5

Stem steerer tube clamp

V-boxx cranks (B52 and H47 only)

Schlumpf speed drive bolts (F37

only)

Magura brake lever clamps

Side cover fasteners

7.5

1. INSTALL THE HANDLEBARS

The handlebars come from the factory with all controls installed and ready. Ensure that a torque wrench is used when

tightening bolts so that the correct torque value is reached.

I. Remove the 4 bolts around stem cap using a 6mm Allen key.

II. Remove cap from stem.

III. Gently and carefully cut tape securing forks to stem and remove bubble wrap.

IV. Install handlebars on stem making sure that wires and cables are moving freely and not fouled in any way.

V. Loosely reinstall the end cap on the stem using the same 4 bolts.

VI. Check alignment of handlebars and preferred riding position.

VII. Evenly tighten bolts to correct tension (see Torque Specifications table).

STEALTH ELECTRIC BIKES OWNER’S MANUAL

V 2.4 PAGE | 8

2. INSTALL THE FRONT WHEEL

For ease of transport, your bike may come with the front wheel uninstalled. The 20mm thru axle needs to be correctly

inserted into the dropout when installing the wheel.

DNM forks

MRP or SR Suntour forks

If your bike is equipped with MRP or SR Suntour forks see their respective manuals for wheel and axle installation.

3. INSTALL THE PEDALS

The B-52 model may come with the cranks removed from the SR Suntour V-boxx. To install these cranks insert them onto

the axle on either side of the bike. Make sure the cranks are parallel and oriented opposite ways. They are tightened with a

torque wrench hex key to the specified torque value.

The other stealth models have the cranks already installed. The pedals need to be installed on the correct side. The right-

hand crank and pedal has a standard thread and the left side has a reverse thread. The pedals should be tightened by hand

Remove stem cap

Hold assembly for

ease of installation

Loosen clamps (5mm Allen

key) and remove axle lock

nut (8mm Allen key). Remove

axle from fork legs.

Put wheel in place being careful

that the brake rotor sits within

the calliper. Slide axle through

hub. Note: sprung fork leg will

need to be compressed slightly to

allow axle to install

Tighten lock nut with

8mm Allen key

Tighten clamps with 5mm

Allen key. Spin wheel and test

brakes before riding.

STEALTH ELECTRIC BIKES OWNER’S MANUAL

V 2.4 PAGE | 9

first to ensure they are not cross threaded or have the wrong thread. Using a hex key or pedal spanner the pedals can be

tightened to the prescribed torque.

Stealth B-52:

Pedals come pre-fitted to the cranks at delivery. The pedal/crank assemblies can be installed using an 8mm Allen key.

I. Ensure pedal is securely fastened to the crank.

II. Connect pedal/crank assembly to gearbox being careful to match left

and right cranks to their respective sides (cranks are marked with L and Ras

shown).

Stealth F-37 and Stealth P-7:

Cranks come pre-fitted to bike. The pedals can be fitted using a 15mm pedal spanner.

I. Unwrap pedals and separate left from right if labelled. If not labelled, the

right pedal always has a standard thread and will only tighten CLOCKWISE into

the right crank. The left pedal is the opposite.

II. Tighten pedals on to their respective cranks using an 8mm Allen key if there

is no surface for a 15mm pedal wrench.

4. INSTALL THE SEAT POST (STEALTH B-52, F-37 AND P-7 MODELS)

The supplied seat posts are extra-long and suitable for taller riders. Shorter riders may find that they need to cut the length

of the seat post to avoid contact with the rear shock. Avoid contact between the shock spring and the seat post and make

sure that the shock will not contact the seat post when the suspension is fully compressed.

I. Bolt the seat to the post loosely.

II. Slide the seat post into the seat tube and adjust the height accordingly.

III. Adjust the tilt of the seat back and forth using the adjusters located on the seat post.

IV. Tighten all bolts. Ensure that there is always a minimum of 50mm of overlap between the seat post and the seat

tube (frame).

STEALTH ELECTRIC BIKES OWNER’S MANUAL

V 2.4 PAGE | 10

5. INFLATE THE TIRES

Tyres should be inflated no greater than the maximum recommended pressure printed on the sidewall of the tire.

Periodically check the wear and tear on the tyres and replace if damaged.

6. INSTALL THE BATTERY (FOR STEALTH B-52, F-37 AND H-52 MODELS)

If your battery has been shipped to you separately you will need to install the battery into the bike.

Check that the seat post will not

collide with shock under full

compression before riding

Loosen rear bolt

Fit clamp to seat rails.

Tighten bolts to get desired

seat angle.

Ensure key is removed when performing any work on bike. Accidental acceleration of bike may cause

serious personal injury.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Stealth Bicicletta

Stealth

Stealth bomber Manuale utente

Manuali Bicicletta popolari di altre marche

RAMBO

RAMBO R1000X2M-FF-BFD Manuale utente

Vermeiren

Vermeiren SAFARI Manuale utente

Velec

Velec A2/36V Manuale utente

Coswheel

Coswheel A-ONE Manuale utente

Betzold

Betzold 97869 Manuale utente

Cervélo

Cervélo S3 2019 Manuale utente

Tenways

Tenways AGO X Manuale utente

Festo

Festo EGSC-BS-KF Manuale elenco delle parti

Gio Electric

Gio Electric H1 Volt Manuale utente

GOGOBEST

GOGOBEST GM30 Manuale utente

DAHON

DAHON CIAO - 2009 Manuale utente

Aprimatic

Aprimatic ONDA 500 Guida rapida

MV Agusta

MV Agusta Lucky Explorer GRAVEL Manuale di istruzioni

Greyp

Greyp G6 Series Manuale utente

Babboe

Babboe Carve-E Manuale utente

Huka

Huka orthros Manuale utente

Xtracycle

Xtracycle Stoker 2021 Manuale utente

APRILIA

APRILIA DORSODURO 750 ABS 2015 Manuale utente