SteelFlex CT1 Manuale utente
VALUEINNOVATION DURABILITYQUALITY
USER MANUAL V.3
TREADMILL
1
TABLE OF CONTENTS
TABLE OF CONTENTS
GROUNDING INSTRUCTIONS................................................ 2
SAFETY INSTRUCTIONS.......................................................... 3
INSTALLATION.......................................................................... 6
TREADMILL OVERVIEW............................................................. 8
OPERATING INSTRUCTIONS FOR CT1................................... 9
OPERATION SYNOPSIS OF PROGRAMS FOR CT1................21
OPERATING INSTRUCTIONS FOR CT2..................................24
TFT-LCD SCREEN OPERATION FOR CT2 ..............................37
OPERATING INSTRUCTIONS FOR PT7/PT10........................46
PT-7/10 USB USER MANUAL ...................................................59
MAINTENANCE.........................................................................61
WARRANTY............................................................................... 62
GROUNDING INSTRUCTIONS
GROUNDING INSTRUCTIONS
DANGER-Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. Check with a
qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the
plug provided with the product- if it will not fit the outlet, have
a proper outlet installed by a qualified electrician.
Make sure that the product is connected to an outlet having the
same configuration as the plug. No adapter should be used with
this product.
The appliance must be positioned so that the plug is accessible.
If the power cord is damaged; it must be replaced by the
manufacturer or its service agent or a similarly qualified person
in order to avoid a safety hazard.
This product must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This product
is equipped with a cord having an equipment-grounding conductor
and grounding plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accordance with
all local codes and ordinances.
2
3
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always
be followed, including the following:
Read all instructions before using the Treadmill.
DANGER - To reduce the risk of electric shock:
Always unplug this appliance from the electrical outlet immediately
after using and before cleaning.
WARNING - To reduce the risk of burns, fire, electric shock,
or injury to persons:
1. An appliance should never be left unattended when plugged in.
Unplug from outlet when not in use, and before putting on or
taking off parts.
2. Close supervision is necessary when this appliance is used by,
on, or near children, invalids, or disabled persons.
3. Use this appliance only for its intended use as described in this
manual. Do not use attachments not recommended by the
manufacture.
4. Never operate this appliance if it has a damaged cord or plug,
if it is not working properly, if it has been dropped or damaged,
or dropped into water. Call service for examination and repair.
5. Keep the cord away from heated surfaces.
6. Never drop or insert any object into any opening.
7. Do not use outdoors.
4
SAFETY INSTRUCTIONS
8. To disconnect, turn all controls to the off position, than remove
plug from outlet.
9. Connect this appliance to a properly grounded outlet only.
See Grounding Instructions.
10. Never Tie off Safety Cord, as this will bypass the SAFE use,
could cause a choking hazard for children, and / or present
other unsafe use of product. Remove and store safety cord
and plug after use. Keep out of reach of children.
11. The appliance is not to be used by children or persons with
reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given
supervision or instruction.
12. Children being supervised not to play with the appliance.
13. WARNING:
REMOVE CONTROL BOX (OR KEY, OR SAFETY PIN) WHEN
NOT IN USE AND STORE OUT OF REACH OF CHILDREN.
AVERTISSEMENT:
RETIRER LA CLÉ DE SÉCURITÉ QUAND L´APPAREIL N´EST
PAS EN SERVICE, ET LA PLACER HORS D´ATTEINTE DES
ENFANTS.
14. CAUTION:
RISK OF INJURY TO PERSONS – TO AVOID INJURY, USE
EXTREME CAUTION WHEN STEPPING ONTO OR OFF OF
A MOVING BELT.
READ INSTRUCTION MANUAL BEFORE USING.
15. For commercial use.
5
SAVE THESE INSTRUCTIONS
GROUNDING PIN
Figure Grounding methods GROUNDED
OUTLET
Note:Illustration is for Example purposes only. Your Treadmill plug and required
outlet may look different. DO NOT MODIFY plug that comes with treadmill.
PRUDENCE:
RISQUE DE BLESSURES - POUR ÉVITER LES BLESSURES,
FAIRE PREUVE DE PRUDENCE EXTRÊME LORSQUE
L'INTENSIFICATION DANS OU HORS D'UN TAPIS ROULANT.
LIRE LES INSTRUCTIONS MANUEL AVANT D'UTILISER
15.CAUTION:
To Reduce The Risk Of Injury From Moving Parts - Unplug
Before Servicing.
ATTENTION: Pour réduire les risques de blessures des pièces
en mouvement - Débranchez avant tout entretien.
16.WARNING:
To Reduce the Risk of Electric Shock – Unplug Before Cleaning
or Servicing.
AVERTISSEMENT - Pour réduire le risque de choc électrique -
le débrancher avant de nettoyer ou de réparer.
SAFETY INSTRUCTIONS
6
INSTALLATION
INSTALLATION
Non-entry side of treadmill - Minimum of 8 inches (20cm)
Entry side of treadmill - Minimum of 36" (90cm)
Front of the treadmill - Minimum of 12 inches (30cm)
Behind treadmill - Minimum of 6 feet (180cm)
These spacing requirements are mandatory for the safe use of
the treadmill. If an accident should occur, you must have sufficient
space to move away from the treadmill.
ELECTRICAL REQUIREMENT
Your STEELFLEX treadmill is intended for use in the country to which
it was shipped. Electrical supplies outside of this country may differ
and may not be compatible with the product. Please consult
Customer Support before using the treadmill in a different country.
LOCATION
When choosing a location for the treadmill, pick a location that is
unobstructed. The treadmill must have the following clearance.
7
INSTALATION
GROUNDING INSTRUCTIONS
The treadmill must be properly grounded prior to use. Proper
grounding reduces the risk of shock or damage to the treadmill.
The power cord's plug is equipped with a grounding conductor
that must be used with an electrical outlet installed in accordance
to all local codes and ordinances. DO NOT use a temporary
adapter that bypasses this function. This will stop the safety
equipment from functioning properly and may void your warranty.
DO NOT MODIFY the plug provided with this product. If it will not fit
an electrical outlet, have a proper outlet installed by a qualified
electrician.
LEVELER LEGS
After finding a location that is suitable for the treadmill, the rear legs
must be adjusted to provide stable support. Located on the side of each
leg is a thumb-wheel that will allow you to lower or raise the leg until it
is
properly
seated on the floor.
DO NOT adjust legs while the
treadmill is on. Turn the power
switch
to the
OFF position
before adjustment.
8
TREADMILL OVERVIEW
TREADMILL OVERVIEW
POWER SWITCH
The power switch is located on the side of the
treadmill near the power cord. The power
switch has two positions - ON and OFF.
The display console will beep when the
treadmill is plugged in and the power switch is pressed ON.
CIRCUIT BREAKER RESET
The circuit breaker is located next to the power switch. If there
should be an electrical overload due to a surge in electricity or
other situation, the circuit breaker will disconnect and attempt to
prevent any damage from occurring to the treadmill.
If the treadmill suddenly stops with no lights visible nor beep heard,
the circuit breaker may need to be reset. To reset the circuit breaker
press the button firmly. The display console should restart and a beep
should be heard.
POWER CORD
The power cord of the treadmill must be plugged into a properly
grounded electrical outlet. Locate the power cord so it will not
come in contact with the wheels of the treadmills during operation.
This may cause the power cord to become pinched or damaged .
Damage to the power cord could result in a fire hazard or cause
personal injury through electrical shock.
CAUTION
Feel the power cord with your hands.If the power cord is warm to
the touch a problem may exist with the electrical outlet in which the
treadmill is plugged. It may be necessary to plug the treadmill into a
different outlet.
9
OPERATING INSTRUCTIONS FOR CT1
OPERATING INSTRUCTIONS FOR CT1
Display instruction
The display of your CT1 is used to operate the unit. It
includes information windows, matrix window and button location.
Information
Window
Matrix Window
Button Location
Information
Window
SHIFT
DISPLAY
6 7 8 9 10
2 3 4 5
6 7 8 9 10
2 3 4 5
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali SteelFlex Tapis roulant
