STEINEL IS 3180-24 Manuale utente

110011484 11/2011 Technical changes subject to no prior notiﬁ cation.

STEINEL America Inc.

9O51 Lyndale Avenue South

USA - Bloomington, MN 55420

Tel: +1-952-888-5950

Fax: +1-952-888-5132

www.steinel.net

Installation Instructions

Commerical Occupancy Sensor

Consignes d'installation

Détecteur de présence à usage commercial

English

Français

Made in

Romania

RoHS

Compliant

IS 3180-24 IS 3360-24 IS 345-24

www.steinel.net (800) 852-4343

In this package

Ř IS 3180-24

occupancy sensor

Ř Accessory pack

containing: plastic

nipple, plastic

washer, lock nut,

lens cover

Ř Installation

instructions

Ř IS 345-24

occupancy sensor

Ř Accessory pack

containing: plastic

nipple, plastic

washer, lock nut,

lens cover

Ř Installation

instructions

Ř IS 3360-24

occupancy sensor

Ř Accessory pack

containing: plastic

nipple, plastic

washer, lock nut,

lens cover

Ř Installation

instructions

Installation Overview

WARNING

Ř Turn power off at the circuit breaker before installing the sensor

Ř Sensor must be installed and used in accordance with appropriate

electrical codes and regulations

Ř Installation by a qualiﬁed electrician is recommended

Intended uses

Ř Suitable for automatic

switching of lights

Environmental considerations

For indoor use only

Needed for installation

Ř Recommended wire: 18

AWG, 3 conductor

Ř For use with a STEINEL

power pack

IS 3180-24 IS 3360-24 IS 345-24

www.steinel.net (800) 852-4343

Product Overview

24VDC PIR

IP20

Product description

The IS 3180-24, IS 3360-24

and IS 345-24 are part of the

STEINEL family of German-

engineered, high performance

commercial occupancy

sensors. They provide

exceptional lighting control in a

wide range of building spaces.

The sensors turn lighting ON either

automatically with occupancy or

manually using a low voltage wall

switch and the manual on mode

of a STEINEL power pack. After a

period of time where no occupancy

has been detected, the sensors

switch lighting OFF.

Applications

Ř Wall or ceiling mount

applications where

180° coverage is

needed

Ř Classrooms, ofﬁces,

conference rooms

Ř Ceiling mount

coverage where aisle

way coverage is

needed

Ř Corridors

Ř Ceiling mount

applications where

360° coverage is

needed

Ř Open and cubicle

spaces

Ř Lobbies

IS 3180-24 IS 3360-24 IS 345-24

www.steinel.net (800) 852-4343

Product Overview

1 - Back housing

2 - Front housing

3 - Shroud

4 - Lens

5 - Decorative cover

6 - Light level setting

7 - Time delay setting

8 - Lock nut

9 - Washer

10 - Snap in threaded nipple

www.steinel.net (800) 852-4343

Speciﬁcations

Product Overview

24 VDC, 12 mA

Wall/ceiling mount

5 sec to 15 min

.2 - 200 fc

2 - 2000 lux

180° horizontal

90° vertical

up to 65 ft *T

up to 42 ft *R

448

IP20

-4°F to +122°F

-20° C to +50°C

3.74x3.74x2.56 in

9 5 x 9 5 x 6 5 m m

Voltage

Mounting

Time Delay

Light Level

Coverage

Detection

levels

Switching

zones

Environment

Dimensions

5 Year Warranty

UL and CUL Listed, RoHS Compliant

*T = tangential reach

*R = radial reach

24 VDC, 12 mA

Ceiling mount

5 sec to 15 min

.2 - 200 fc

2 - 2000 lux

360° horizontal

180° vertical

up to 130 ft *T

up to 25 ft *R

1416

IP20

-4°F to +122°F

-20° C to +50°C

3.74x3.74x2.56 in

9 5 x 9 5 x 6 5 m m

24 VDC, 12 mA

Ceiling mount

5 sec to 15 min

.2 - 200 fc

2 - 2000 lux

180° horizontal

45° vertical

65 x 13 ft *T

40 x 13 ft *R

280

IP20

-4°F to +122°F

-20° C to +50°C

3.74x3.74x2.56 in

9 5 x 9 5 x 6 5 m m

IS 3180-24 IS 3360-24 IS 345-24

www.steinel.net (800) 852-4343

Mounting

Placement guidelines

Ř Detection lens must have a

clear, unobstructed view of

the detection area; the sensor

does not detect from behind

obstacles, such as walls or

panes of glass

Ř Ideal mounting height is 8-12

feet

Ř The site of installation should

be at least 20 inches away

from another light because

heat radiated from it may

activate the system

Ř An optional corner wall mount

(product no. 648015 black or

648114 white) is available for

installing the IS 3180-24 in

corners.

IS 3360-24 IS 345-24

IS 3180-24

www.steinel.net (800) 852-4343

Installation

Installation - wall or ceiling

mount with screws

Ř Conﬁrm power is off at the

circuit breaker

Ř Install power pack and run

low voltage wire to the sensor

location

Ř Remove the decorative cover

Ř Remove the screws securing

the front and back housings

Ř Separate the top housing from

the back housing

Ř Fasten the back housing to

the wall with screws through

the pre-punched holes (60 mm

or 2 3/8 in apart)

Ř Connect wiring

Ř Reattach the front housing to

the back housing and secure

with screws

Ř Snap the decorative cover back

in place

wires 200 mm

www.steinel.net (800) 852-4343

Installation

Installation - ceiling mount

with threaded nipple

Ř Conﬁrm power is off at the

circuit breaker

Ř Install power pack and

run low voltage wire to the

sensor location

Ř Run low voltage wires from

the sensor through the

provided threaded nipple and

snap threaded nipple in back

of sensor

Ř Cut 7/8” hold in ceiling tile

Ř Place threaded nipple

through hole in ceiling tile,

add washer and secure with

locknut

Ř Wire sensor to STEINEL

power pack

Ceiling Tile Washer

Locknut

Sensor

Threaded Nipple

Ceiling Tile

Locknut

Washer

Sensor

www.steinel.net (800) 852-4343

Operation

The IS 3180-24, IS 3360-24 and

IS 345-24 work with a STEINEL

power pack to control lighting

based on occupancy and daylight.

Manual operation

A line voltage or low voltage

switch may be used for manual off

control when the power pack is in

automatic on mode.

For manual on only operation, a

low voltage momentary switch is

required along with a STEINEL

power pack set in manual on

mode.

Light level function

The sensors incorporate a built-in

light level sensor which keeps

lighting off during daylight hours,

regardless of occupancy.

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali STEINEL Accessori

STEINEL

STEINEL Studioline 400 Manuale utente

STEINEL

STEINEL IR Quattro HD-2 KNX Manuale utente

STEINEL

STEINEL iHF 3D KNX Guida rapida alla configurazione

STEINEL

STEINEL IR 180 KNX Guida utente

STEINEL

STEINEL NM 5000-3 DAL Manuale del proprietario

STEINEL

STEINEL HBS 300 Manuale utente

STEINEL

STEINEL StudioLine IS 2160 Manuale utente

STEINEL

STEINEL SensorSchalter IR 180 UP Manuale utente

STEINEL

STEINEL GL 60 S Series Manuale utente

STEINEL

STEINEL HPD 2 IP Manuale utente

STEINEL

STEINEL GluePRO 300 Manuale utente

STEINEL

STEINEL IR 180 UP easy Manuale utente

STEINEL

STEINEL IS 3180 Manuale utente

STEINEL

STEINEL L 260 Manuale utente

STEINEL

STEINEL IS 180-2 Manuale utente

STEINEL

STEINEL IS 3360 Manuale utente

STEINEL

STEINEL IS 300 Manuale utente

STEINEL

STEINEL IS 140-2 Manuale utente

STEINEL

STEINEL Control Pro IR Quattro MICRO DCS Manuale utente

STEINEL

STEINEL SensorSchalter IR 180 UP Manuale utente

STEINEL

STEINEL XSolar L-S Manuale utente

STEINEL

STEINEL StudioLine HF 3600 Manuale utente

STEINEL

STEINEL LEDVANCE Osram ST8 LB Gen2 Manuale utente

STEINEL

STEINEL IS 1 Manuale utente

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente