Steiner 75-71215B4 Guida all'applicazione
OPERATION / PARTS MANUAL
MAN 4175237
Rev. A 07-2017
MODEL:
75-71215B
450 CAB KIT
www.steinerturf.com
CALIFORNIA
Proposition 65 Warning
Diesel engine exhaust and some of
itsconstituentsareknown tothe State
of California to cause cancer, birth
defects and other reproductive harm.
Californie Proposition 65
Avertissement
Les échappements des moteurs diesel
et certains de leurs composés sont
reconnus par l’Etat de Californie pour
être cancérigènes, provoquer des
défautscongénitaux etd’autresdangers
en matière de reproduction.
ADVERTENCIA
AVERTISSEMENT
WARNING
The engine exhaust from this product
containschemicalsknown totheState
of California to cause cancer, birth
defects or other reproductive harm.
California Advertencia
de la Proposicion 65
ElestadodeCaliforniahacesaber que
los gases de escape de los motores
dieselyalgunos desus componentes
producen cáncer, defectos de
nacimiento y otros daños en el
proceso de reproducción humana.
L’
é
mission du moteur de ce mat
é
riel
contient des produits chimiques que
l’Etat de Californie consid
è
re
ê
tre
canc
é
rig
è
nes, provoquer des d
é
fauts
cong
é
nitaux et d’autres dangers en
mati
è
re de reproduction.
El estado de California hace saber
que los gases de escape de este
producto contienen productos
quÍmicos que producen cáncer,
defectosde nacimientoy otrosdaños
en el proceso de reproducción
humana.
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, wiring
insulation, and related accessories
contain lead and lead compounds,
chemicals known to the State of
California to cause cancer and birth
defects or other reproductive harm.
WASH HANDS AFTER HANDLING.
1
CAB IMPORTANT MESSAGE
Thank you for purchasing this Schiller Grounds Care, Inc. product. You have purchased a world class product, one of the best designed
and built anywhere.
This machine comes with an Owner / Operator's Manual and an Illustrated Parts Manual. The useful life and good service you receive from
this machine depends to a large extent on how well you read and understand these manuals. Treat your machine properly, lubricate and
adjust it as instructed, and it will give you many years of reliable service.
Your safe use of this Schiller Grounds Care, Inc. product is one of our prime design objectives. Many safety features are built in, but we
also rely on your good sense and care to achieve accident-free operation. For best protection, study the manuals thoroughly. Learn the
proper operation of all controls. Observe all safety precautions. Follow all instructions and warnings completely. Do not remove or defeat
any safety features. Make sure those who operate this machine are as well informed and careful in its use as you are.
See a Schiller Grounds Care, Inc. dealer for any service or parts needed. Schiller Grounds Care, Inc. service ensures that you continue to
receive the best results possible from Schiller Grounds Care, Inc. products. You can trust Schiller Grounds Care, Inc. replacement parts
because they are manufactured with the same high precision and quality as the original parts.
Schiller Grounds Care, Inc. designs and builds its equipment to serve many years in a safe and productive manner. For longest life, use this
machine only as directed in the manuals, keep it in good repair and follow safety warnings and instructions. You'll always be glad you did.
Schiller Grounds Care, Inc.
One Bob Cat Lane
Johnson Creek, WI 53038-0469
07-2017
TABLE OF CONTENTS FIGURES PAGE
INTRODUCTION, SPECIFICATIONS, ACCESSORIES ...........................................................................................1
SAFETY.....................................................................................................................................................................2
ASSEMBLY ..........................................................................................................................................................3-10
PARTS SECTION....................................................................................................................................................11
MOUNTING KITASSEMBLY................................... FIGURE 1..............................................................................12
KIT HARDWARE..................................................... FIGURE 2..............................................................................13
FRONT VIEW ASSEMBLY...................................... FIGURE 3..............................................................................14
REAR VIEW ASSEMBLY ........................................ FIGURE 4..............................................................................15
HEADLINER ASSEMBLY........................................ FIGURE 5..............................................................................16
WIRE HARNESS..................................................... FIGURE 6..............................................................................17
RIGHT SIDE ASSEMBLY........................................ FIGURE 7........................................................................18, 19
LEFT SIDE ASSEMBLY........................................... FIGURE 8........................................................................20, 21
ROOF ASSEMBLY ..................................................FIGURE 9........................................................................22, 23
ACCESSORIES
WATER HEATER KIT 75-71221
QUICK DISCONNECT HEATER HOSE KIT 75-71229
FRONT WORK LIGHTS- HALOGEN 75-71222
FRONT WORK LIGHTS - LED 75-71309
REAR WORK LIGHT - LED 75-71310
SAFETY BEACON LIGHT KIT 75-71223
CENTER MOUNT BRACKET OPTION FOR BEACON LIGHT 4174404
CIRCULATION FAN KIT 75-71224
DUAL EXTERIOR MIRROR KIT 75-71225
INTERIOR MIRROR 75-71226
SPECIFICATIONS
Overall Height (Installed)......................................... 77"
Overall Width........................................................... 44.5"
Cab Weight.............................................................. 180lbs.
2
CAB
MODEL NUMBER: This number appears on
sales literature, technical manuals and price lists.
SERIAL NUMBER: This number appears only
on your unit. Use this number when ordering
parts or seeking warranty information.
SAFETY
NOTICE !!!
Unauthorizedmodicationsmaypresentextreme
safety hazards to operators and bystanders and
could also result in product damage.
Schiller Grounds Care, Inc. strongly warns against,
rejects and disclaims any modications, add-on
accessories or product alterations that are not
designed,developed,testedandapprovedbySchiller
GroundsCare,Inc.'s Engineering Department. Any
Schiller Grounds Care, Inc. product that is altered,
modiedorchangedinanymannernotspecically
authorized after original manufacture–including the
additionof“after-market”accessoriesorcomponent
partsnotspecicallyapprovedbySchillerGrounds
Care, Inc.–will result in the Schiller Grounds Care,
Inc. Warranty being voided.
Any and all liability for personal injury and/or
property damage caused by any unauthorized
modications,add-onaccessoriesorproductsnot
approved by Schiller Grounds Care, Inc. will be
considered the responsibility of the individual(s) or
company designing and/or making such changes.
Schiller Grounds Care, Inc. will vigorously pursue
full indemnification and costs from any party
responsibleforsuchunauthorizedpost-manufacture
modicationsand/oraccessories shouldpersonal
injury and/or property damage result.
This symbol means:
ATTENTION!
BECOME ALERT!
Your safety and the safety of others is involved.
Signal word defi nitions:
The signal words below are used to identify levels
of hazard seriousness. These words appear in this
manualandonthesafetylabelsattachedtoSchiller
Grounds Care, Inc. machines. For your safety and
thesafetyofothers,readandfollowtheinformation
given with these signal words and/or the symbol
shown above.
DANGER indicates an imminently hazardous
situationwhich, ifnot avoided, WILL result in death
or serious injury.
WARNING indicates a potentially hazardous
situation which, if not avoided, COULD result in
death or serious injury.
CAUTIONindicatesapotentiallyhazardoussituation
which,ifnotavoided,MAY resultinminorormoderate
injury. It may also be used to alert against unsafe
practices or property damage.
CAUTION used without the safety alert symbol
indicates a potentially hazardous situation which, if
not avoided, MAY result in property damage.
10 degree maximum angle of operation of power
unit with weather cab installed.
3
CAB ASSEMBLY
Read these instructions and identify all com-
ponents. Please retain these instructions for
future reference and parts ordering information.
MACHINE PREPARATION
1. Remove all attachments if present.
2. With the engine off, disconnect the battery using
the battery main disconnect switch on the back
of the battery compartment. Figure 1
3. Remove the two bolts Aand nuts Bsecuring the
reverse control pedal on the tractor. Figure 2
4. RemovetheoorplatebyremovingfourboltsC.
Figure 3
FIGURE 1
FIGURE 2
FIGURE 3
4
CAB
FRONT MOUNT INSTALLATION:
5. Secure the two front mount brackets (Item 7)
to the bottom of the machine using hardware.
Torque to 70 ft-lb (95n-m). Figure 4
(2) 1/2" X 1.50" long bolts (Item 16)
(2) 1/2" nylon nuts (Item 17)
(3)1/2"largeODatwashers(Item 31)
two on right side one on outside left side
(1)1/2"smallODatwasher (Item 15)
one on inside left side.
6. Secure the brackets to the side of the machine
using hardware. Torque to 70 ft-lb (95n-m).
Figure 4
(4) 1/2" x 1.25 long bolts (Item 26)
(4) 1/2" nylon nuts (Item 17)
(4)1/2"smallODatwashers (Item 15)
7.Reinstalltheoorplatewithhardwareremovedin
Step 4.
8. Reattach the reverse control pedal using
hardware removed in Step 3.
PUMP COVER FILLER PANEL INSTALLATION:
9. Remove the four mounting screws Dsecuring the
rear pump cover on the steering tower. Unplug
the two wires from the accessory plug in the
pump cover storage area. NOTE the polarity of
the connections. Figure 5 & 6
FIGURE 5
FIGURE 6
FIGURE 4
ASSEMBLY
5
CAB
10. On the inside of the removed pump cover, install
thetopllerplate (Item 5) using two .25 x .75
screws (Item 27) and two locking nuts. (Item 23)
Install the screws from the outside inward.
Figure 7
11.Installthellerdashbottom (Item 4) using two
.25 x .75 screws (Item 27) and two locking nuts
(Item 23). Install screws from outside in.
Figure 8
DASH FILLER PANEL INSTALLATION:
12.OpenthehoodandattachtheLHdashller
mount (Item 12)tothehoodusingtheLHller
dash bracket (Item 11) and two .25 x .75 screws
(Item 27). The screws will go up from the bottom
of the mount, through the hood, and screw into
thellerbracket.Tightenbothscrews.Figure 9
13.InstalltheLHdashllerassembly(Item 8) to
theLHdashllermountinstalledinStep12
using three .25 x .75 screws (Item 27). Tighten
screws. Install one Insulated hose clamp (Item
21)totheLHdashllerassy (Item 8) using one
.25 x .75 screw (Item 27). Figure 9
FIGURE 8
FIGURE 7
FIGURE 9
11
27
27
12
8
21
ASSEMBLY
6
CAB
14.InstalltheRHdashllermountingbracket(Item
9) using two .25 x .75 screws (Item 27) Bracket
should sit on top of the hood rail with hardware
going through hood then into bracket. Figure 10
If you don't have enough room, you may have to
rotate the hydraulic cooler hose on the oil cooler
inward and upward (clockwise) towards the cen-
ter of the machine. Figure 11
15.InstalltheRHdashllerassembly(Item 10) to
theRHdashllermountinstalledinStep14
using two .25 x .75 screws (Item 27). Tighten
screws. Install one Insulated hose clamp (Item
21)totheRHdashller (Item 10) using one .25
x.75 screw (Item 27). Figure 10
OSCILLATION STOP INSTALLATION:
16. Locate and remove the existing bushings E.
They are retained by two 5/8" carriage bolts F,
lock washers Gand nuts H. You should be able
to access from the bottom of the machine on the
front side of the steering link. Slide oscillation
stops (Item 1) in and attach with existing
hardware. Figure 12
FIGURE 12
FIGURE 10 10
27
27
9
21
FIGURE 11
F
G
H
E / 1
ASSEMBLY
7
CAB
REAR MOUNT INSTALLATION:
17. Loosely secure the Rear Mounting Bracket (Item
6) to the machine as shown in Figure 13 & 14
using hardware:
(2) 1/2" U-bolts (Item 25)
(4)1/2"serratedangenuts(Item 22)
DO NOT TIGHTEN AT THIS TIME!
INSTALLING THE CAB:
18. Flip the seat forward on the machine and lower
the ROPS upper hoop.
Using a spreader bar or lifting strap and overhead
crane or forklift, carefully raise the cab and remove
the crating and pallet. Locate the lifting strap at the
location of the roof brackets on the upper sides.
19. Lower the cab onto the tractor and align the front
mount holes of the cab tubes with the holes on
the front mount brackets installed in Step 7. The
rear mount may need to be tilted forward as you
lower the cab to allow it to pass to the inside of
the rear cab wall. Figure 15
20. Secure the front of the cab to the front mounts
installed in Step 4 using hardware:
Figure 16
(2) rubber isolators (Item 28)
(2)3/4"atwashers (Item 18)
(2) 3/8" x 3.50" bolts (Item 19)
(2) 3/8" nylock nuts (Item 29)
(4)3/8"atwashers (Item 30)
Torque to 30 ft-lb (41 N-m)
FIGURE 13 FIGURE 14
FIGURE 15
FIGURE 16
ASSEMBLY
8
CAB
21. Install the rubber isolators (Item 28) onto the
rear mount bracket. Secure the rear mounting
bracket to the back of the cab using hardware:
Figure 17
(4) 3/8" X 2.50" long bolt (Item 14)
(4) 3/8" nylock nuts (Item 29)
(4)3/8"atwashers(Item 30)
Torque to 30 ft-lb (41 N-m)
22. Tighten the nuts on the U-bolts for the rear mount
installed in Step 17.
23. Attach the two "P" clamps supplied on the 96"
bungee cord to the machine at the foot panel
using hardware:
Figure 18
(2) .75" long bolts (Item 24)
(2)1/4"angednuts(Item 23)
24. Remove screws (Item 27 ) from "P" clamps
(Item 30) on each side that were attached to
thefrontllerpanelsinSteps13and14.Slide
bungee cord into the clamp and attach bolt and
clamptofrontllerpanelsasshowninFigure 19
& 20
FIGURE 17
FIGURE 18
FIGURE 19
FIGURE 20
ASSEMBLY
Indice
Altri manuali Steiner Spazzaneve
