Stello CDA 500 Manuale utente

Stello CDA500

INTRODUCTION

Thank you for choosing the Stello CDA 500 from April Music. This superb CD player is also a USB DAC,

enabling playback of computer audio files through high-quality audio systems. The CDA 500 incorporates

state-of-the-art engineering and extreme musicality in a compact form factor. For music lovers and audio

enthusiasts alike, the CDA 500 offers the utmost in sonic reproduction and quality of construction.

Perfect for music of all genres, the CDA 500 features a top-loading transport mechanism for maximum

stability. This design eliminates the need for a drawer and drawer-loading mechanism, problematic with

players from other makers. The CDA 500 features custom-designed signal-processing and transmission

circuits that emphasize the overall musicality of the source recording.

April Music delivers the opposite of the cold, antiseptic digital sound so often encountered with equipment

built to rigorous engineering specifications but lacking the necessary soulfulness of real musicianship. For us,

music comes first.

Downloads are everywhere, but the compact disc is also here to stay. The Stello CDA 500 accommodates

both formats with ease. A superb CD player, the CDA 500 features a top-loading mechanism for trouble-free

operation. Electronic highlights include upsampling to 24 bits/192kHz, and compatibility with both “Red Book”

standard CDs and CD-Rs. With a full bank of analog and digital inputs and outputs, the CDA 500 will fit into

any kind of home entertainment system, be it old-school analog or cutting-edge digital.

The CDA 500 is also a bridge to the world of computer audio. USB connectivity means the CDA 500 can

communicate directly with your personal computer, elevating your archived audio files to CD quality. The

computer is a fantastic tool and ultra-convenient portable library, but it lacks refinement as an audio playback

device. You will be amazed at how good computer audio can sound when processed through the CDA 500‟s

state-of-the-art Digital-to-Analog converter.

Stello CDA500

FEATURES

-Top-loading transport mechanism, with sliding type cover, proven to be among the most efficient

transports available, with improved readability for all CD, CD-R, and CD-RW audio discs. The CDA

500 does not support playback of SACD, DVD-A, DVD or Blu-ray formats.

-The transport mechanism is specially mounted to enhance mechanical isolation, even after extended

use.

-Pick-up mechanism and Digital Signal Transmission Circuit (DSTC) are physically separated for

maximum operating efficiency

-Proprietary transmission circuitries get the most out of audio signals with no signal loss or audible

noise, resulting in a compelling listening experience

-Two digital outputs are provided for flexible connection to an external DAC. These include

coaxial and optical (Toslink).

-Elegant form factor is consistent with other Stello products, providing world-class performance

without the spatial intrusion of oversized components.

-Digital inputs include coax, optical and USB.

-USB input enables playback of audio files direct from computer.

Stello CDA500

PRECAUTIONS

The Stello CDA 500 is designed to operate at the proper voltage within the country it is used.

Please check the voltage before powering the CDA 500. If it is necessary to change the mains

voltage, please contact the authorized dealer from whom you purchased this unit, or contact April

Music at www.aprilmusic.com.

The Stello CDA 500 is a highly sensitive precision instrument. For best results, use it on a level,

vibration-free shelf system, isolated from airborne vibration.

Do not open the chassis without prior authorization from the manufacturer or a certified Stello

agent. Unauthorized repair or tempering of any type will void the manufacturer‟s warranty.

If you have to travel with the CDA 500, be sure to reinstall the drawer protector to prevent

accidental opening of the drawer.

UNPACKING

In the box you will find the following:

CDA 500

Power Cord

PC USB Cable Connector

Remote Control

Retainer Puck for the CDA 500

Owner's Manual

Remove all contents. Save the box and packing in case you need to ship the CDA 500.

Place the CDA 500 on a sturdy surface near your other components and plug in the power cord. When

playing CDs, you will open the sliding cover, place the disc label side up, put the retainer puck on top of it,

and close the cover.

Stello CDA500

CONNECTIONS

Analog Connections –CDA 500 as a CD player

The CDA 500 has both balanced (XLR) and unbalanced (RCA) stereophonic Left/Right outputs.

Digital Connections –CDA 500 as a CD Transport

The CDA 500 has coaxial and optical digital outputs. Use an unbalanced digital cable with 75-Ohm

characteristic impedance for RCA type coaxial connection. Use RCA-BNC adapter for a BNC

connection. Use a Toslink optical cable between CDA 500 and Toslink-based DAC port.

DAC (Digital to Analog Converter) Connections –CDA 500 as a DAC

All of the digital connections are fully operational. The user just needs to select the proper cables

to connect CD transport or computer to the CDA 500.

Stello CDA500

OPERATION

Front Panel

Functions

1. POWER On/Off: Turn on „Main‟ power switch located on the upper left corner of the front panel.

2. INPUT: Selects source - COAX/ OPT/ PC/ CD (Display shows LOAD first; CD spins, then display shows

playing track and time status, for example, “01 00:45”). To insert disc, place CD on spindle with printed label

side up. Place stabilizing puck on top of the disc and close the glass cover

3. UPSAMPLE: Select 16 bits/44.1 kHZ (BYPASS), 24/96 or 24/192 upsampling by sequentially pressing the

center button under the display window. BYPASS mode is set as default but you can choose either SRC 96K

or SRC 192 based on your preference from your CDs.

4. TIME: By pressing the TIME button, the display changes as follows: Current track time increase / current

track time decrease / decrease from total track time.

5. Circular button on the right side, from the top: (REPEAT, ▶||, ■) From left: (|◀, ▶|)

PLAY / PAUSE(▶||): Press „PLAY‟ (center button on right side of front panel) to play the disc.

The track number and elapsed time will be displayed. Use this button (same as play button) to pause the

disc. To resume play, press again.

STOP(■): Use this button (bottom on right side) to stop playing the disc.

The CD‟s embedded information will be shown on the display window.

TRACK: Press this button to skip to the previous or following track. Select the desired track by pressing one

of the arrow buttons, then press PLAY to start the music. While playing, press one of the arrow buttons to

skip tracks. Play will resume automatically on the selection of your choice.

REPEAT (via remote control) There are three Repeat functions: REPEAT ALL, REPEAT ONE, and

Stello CDA500

REPEAT OFF. To repeat the entire disc, choose „REPEAT ALL‟. To repeat only one track, choose the track

and press „REPEAT‟ until display shows „REPEAT ONE‟, then press „PLAY‟ button to start the music. Press

the „REPEAT‟ button once more to cancel the repeat command.

Stello CDA500

REMOTE CONTROL

[Remote Controller Layout]

STANDBY

Reactive the CDA500

DISPLAY

You can vary the brightness of the display in five levels (from „off‟to „very bright‟)

by pressing the “DISPLAY”button.

DISC

CD loading (Reset button)

1~0

You can listen wanted track by pressing 2 digits from these key pads.

PROGRAM

Use this function to play only the programmed tracks.

For example, to listen to tracks 8, 3, and 13, press 8 > PROG > 3 > PROG > 13 >

PROG > PLAY. Press the „STOP‟ button to stop the CD. The selected program is

still initialized. If „PLAY‟ is pressed again, the CD will begin from track 8. To

deactivate the „PROG‟ function, press „■‟twice. The „PROG‟ indicator on the

display will be turned off.

A - B

Use this function to listen to a customized edit of the track, extremely useful for

musicians in the process of learning a part from a recording. During playback,

press „A - B‟ at the beginning of the desired section. An „A‟ will appear at the

bottom of display window. Press „B‟ at the end of the section, which will change

the display to „A - B‟, and the CDA 500 will repeatedly play the edited section until

the A - B key is pressed to cancel the time-selected repeat function.

TIME

Press the „TIME‟ key once to show the total playing time. Press the „TIME‟ key

again to show total remaining time. (TIME REM). Press „TIME‟ a third time to

return to the standard display.

Stello CDA500

SCAN

Pressing this button will play the beginning of each track for 10 seconds.

Press „SCAN‟ once more to play the entire track.

RANDOM

Tracks will be played in random order. Press RANDOM again to deactivate the function.

INPUT

Same as the function explained from front panel section.

UPSAMPLE

Same as the function explained from front panel section.

REPEAT

Same as the function explained from front panel section.

Previous Track (|◀)

This button has two functions, and is marked |◀. Press once and the track being played will start playing

from the beginning again. Press |◀twice quickly and the previous track on the CD will play from the

beginning.

Next Track (▶|)

This button only has one function, and is marked as ▶|.Press this button once and the next track on the CD

will begin playing. Each time you press this button, the next track on the CD will begin to play in the normal

ascending numeric order, or the next programmed selection if you have used the “PROG”option.

Play / Pause (▶||)

The PLAY function is used to start a new listening program. When a CD is placed on the turntable the PLAY

function will not operate until one of the two following function is activated :

a) The “DISC”button on the CD player has been pressed.

b) The “STANDBY”button on the remote control is pressed twice.

This starts the turntable spinning and the disc information is read by the laser. The disc information will then

appear on the main display screen. Once the disc information is displayed, it is possible to play the CD by

pressing the “▶||” on the remote control.

Stello CDA500

This function suspends the playing of the CD at the exact point that the “▶||” button was pressed. This

mutes the sound completely. Press “▶||” again and play resumes from the exact point it was originally

suspended.

Stop Button (■)

This function stops the CD turntable from spinning and the laser from reading the digital information on the

disc. It also cancels all programmed functions and enables the current disc to be removed. The CD turntable

is now ready to accept another disc or to be switched off at the end of the current listening session.

Search Buttons (◀◀ ▶▶)

During playback, this feature allows fast search forward or fast search backward to the exact location of the

track. Press the double arrows to move forward or to go backward. To increase search speed, continue

holding the button. The music will play at normal speed when the button is released.

Indice

Altri manuali Stello Lettore CD

Stello

Stello CDA320 24/192 Manuale utente

Manuali Lettore CD popolari di altre marche

RCA

RCA RP-7923 Manuale utente

Pioneer

Pioneer DEH-P3550MP XM Manuale utente

Philips

Philips AZ1207 Manuale utente

Philips

Philips CD582 Manuale utente

Philips

Philips AZ 6821 Manuale utente

Lasonic

Lasonic MSU-2020 Manuale utente

THOMSON

THOMSON RCD150 Manuale utente

Denon

Denon DCD-1420 Manuale utente

Panasonic

Panasonic SJ-MR100 Manuale utente

Onkyo

Onkyo DX-7210 Manuale utente

Sony

Sony MZ-R3 Manuale utente

Denon

Denon DVM-4800 Manuale utente

JBL

JBL MR-32 Manuale utente

RCA

RCA RCD152 Manuale utente

Technics

Technics SL-PS770A Manuale utente

Clarion

Clarion compact disc Manuale utente

Sony

Sony MZ-M10 Manuale utente

Philips

Philips Expanium AZ 1538 Manuale utente