5. Operating Instruction of the Button and DC & Aux-in Jack Connect the adaptor
with the unit to turn on the unit. The
Time displaying on the LED screen is random time during the first use of the unit;
the figure on the right side is the room m temperature. There are 2 degree difference
between the displaying temperature and the actual temperature.
5.1Time Settings
Press “12/24” to switch 12-hour mode and 24 -hour mode. In 12- hour mode, a single
hour figure begins to flash; in 24- hour mode, both of the two hour figures begin to
flash.
After confirm the hour mode, press “TIME”, the HOUR figure begins to flash. Press
“UP”/ “DOWN” to adjust the HOUR; Press “TIME” again, the MINUTE figure
beings to flash. Press “UP”/ “DOWN” to adjust the MINUTE. To exit time setting,
press “TIME” to confirm your setting. (No operation on any keys in 15 seconds, it
exits time setting automatically)
5.2. Alarm Settings
Press “DOWN”to turn on alarm. The alarm indicator light begins to flash on the
LED screen in every 2 seconds. The alarm clock only works for one time.
Press”DOWN”again, the alarm indicator light stops flashing. The alarm clock works
everyday (See Fig 4)
Press “DOWN” to turn on alarm. The alarm indicator light begins to display on the
LED screen. (See Fig.4)
Press “ALARM” to set alarm time, the HOUR figure begins to flash, Press “UP”/
“DOWN” to adjust the HOUR; Press “ALARM”again, the MINUTE figure beings
to flash. Press “UP”/ “DOWN”to adjust the MINUTE. To exit alarm setting, press
“ALARM”to confirm your setting. (No operation on any keys in 15 seconds, it exits
alarm setting automatically).When alarm is on; it can last for one hour. Press any key
on “TIME”/ “ALARM”/ “UP” / “DOWN” to stop the alarm.
After stop the alarm, it will be on again after 24 hours. To turn off alarm, press
“DOWN”, the alarm indicator light goes out.
Press “DOWN”to turn on alarm, the circle dot lights up. When it begins to flash, it
means the alarm clock only works for one time. When it stops to flash, it means the
alarm clock works everyday.
Press “DOWN”to turn off alarm, the circle dot goes out.
