STEPHEN TECHNOLOGIES CO.,LIMITED SVG500SO 1 FXS + 1 FXO SIP VoIP ATA User Manual
4
2 IVR Interface for The TA
You can use the PSTN phone to configure the TA. Please follow the instruction to configure your
terminal adapter.
Group IVR Action IVR Menu Choice Parameter(s) Notes:
Function Reboot #195# None
After you hear “Option Successful,”
hang-up. The system will reboot
automatically.
Function Factory Reset #198# None
System will automatically Reboot.
WARNING: ALL “User-Changeable”
NONDEFAULT SETTINGS WILL
BE LOST! This will include network
and service provider data.
Info Check IP
Address #120# None IVR will announce the current IP
address of the TA
Info Check IP Type #121# None IVR will announce if DHCP in
enabled or disabled.
Info Check the Phone
Number #122# None IVR will announce current in use
VoIP number
Info Check Network
Mask #123# None IVR will announce the current
network mask of the TA.
Info Check Gateway
IP Address #124# None IVR will announce the current
gateway IP address of the TA.
Info
Check Primary
DNS Server
Setting
#125# None IVR will announce the current
setting in the Primary DNS field.
Info Check Firmware
Version #128# None IVR will announce the version of the
firmware running on the TA.
Setting Set DHCP client
#111# None The system will change to DHCP
Client type
Setting Set Static IP
Address #112xxx*xxx*xxx*xxx#
Enter IP address using numbers on
the telephone key pad. Use the *
(star) key when entering a decimal
point.
DHCP will be disabled and system
will change to the Static IP type.
Setting Set Network
Mask #113xxx*xxx*xxx*xxx#
Enter value using numbers on the
telephone key pad. Use the * (star)
key when entering a decimal point.
Must set Static IP first.
Setting Set Gateway IP
Address #114xxx*xxx*xxx*xxx#
Enter IP address using numbers on
the telephone key pad. Use the *
(star) key when entering a decimal
point.
Must set Static IP first.
Setting Set Primary DNS
Server #115xxx*xxx*xxx*xxx#
Enter IP address using numbers on
the telephone key pad. Use the *
(star) key when entering a decimal
point.
Must set Static IP first.
Setting Set Codec #130+[1-8]#
1:G.711 u-Law, 2: G.711 a-Law, 3:
G.723.1, 4: G.729a, 5: G.726 16K, 6:
G.726 24K, 7: G.726 32K, 8: G.726
40K,
You can set the codec you want to
the first priority.
Setting Set Handset
Gain #131+[00~15]# Handset Gain from 0~15 You can set the Handset gain to
proper value, default is 6
Setting Set Handset
Volume #132+[00~12]# Handset Volume from 0~12 You can set the Handset volume to
proper value, default is 10
By default, NAT is on, LAN’s ip is 192.168.123.1(dial #120# to check LAN’s ip), WAN is DHCP client
(dial #126# to check WAN’s ip).
3 Setup the TA by Web Browser
The TA provides a built-in web server. You can use Web browser to configure the TA. First please input
the IP address in the web browser. In the end of IP address, please add the port number “:9999”.
Ex:http://192.168.1.100:9999. By default, NAT is on, LAN’s ip is 192.168.123.1(dial #120# to check LAN’s ip),
WAN is DHCP client (dial #126# to check WAN’s ip). You have to set your PC in the same subnet with TA in
order to connect them with each other.
3.1 Login
Please input the username and password into the blank field. The default setting is:
1. For Administrator, the username is: root; and the password is: test. If you use this account to login,
you can configure all the settings.
