Steren MODLED-150/RO Manuale utente
+12V
+12V
+12V
RED OUTDOOR
LED STRIP
MODLED-150/RO
V0.0 / 0416m
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year and
three months on the battery from the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice, product box or package, and product, must be presented when warranty
service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned
later.
THIS WARRANTY IS VOID INTHE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries,
failure to follow enclosed instructions, improper repair by unauthorized personnel, improper
safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ______________________________________________________
Address _____________________________________________________________
Delivery date __________________________________________________________
01 800 500 9000
Product: Red outdoor LED strip
Part number: MODLED-150/RO
Brand: Steren
SIZE 1
Before starting
Connection
Installation
• Take measures to know the length of strip
that you will need.
• Make the cut on the dotted line if it is
necessary.
Insert the connector in a regulated
eliminator
1. Select a smooth and at surface to place the
strip. Make sure it is free of dust or waste.
2. Remove the protective lm.
3. Paste the strip.
1. Remove the plastic layer
carefully.
4. Use a soldering iron and a
tin solder to x cables.
5. Insulate the connection with
electrical tape, silicone or
thermot.
3. Place two cables between the terminals.
Check the polarity.
2. Cut on the dotted line.
+12V
+12V
+12V
Join two strips
+12V +12V +12V
+12V +12V
+12V +12V
+12V +12V +12V
+12V +12V
+12V +12V
Avoid handling the strip while it is connected to energy
electric
You can join up to three strips. If you exceed this amount, overheating may occur
+12V +12V +12V
+12V +12V
SIZE 2
Specications
Important
Input: 12 V - - -
Consumption: 3.6W per meter
Color: red
Protection IP: 65
Consumption: 18 W/h
Stand-by power consumption: not applicable
The instructions of these manual are for reference about the product.
There may be dierences due to update.
Please check our web site (www.steren.com) to obtain the latest version of
the instruction manual.
Read these manual to avoid any damage.
Indice
Altri manuali Steren Attrezzatura di illuminazione
Steren
Steren LAS-550 Manuale utente
Steren
Steren LAM-510 Manuale utente
Steren
Steren LAM-SWI Manuale utente
Steren
Steren LAM-505 Manuale utente
Steren
Steren MODLED-100/BCO Manuale utente
Steren
Steren LAM-705 Manuale utente
Steren
Steren 125/BC0 Manuale utente
Steren
Steren PAR-030 Manuale utente
Steren
Steren BIKE-300 Manuale utente
Steren
Steren LAM-263 Manuale utente
Steren
Steren MODLED-300/RGB Manuale utente
Steren
Steren DIS-150 Manuale utente
Steren
Steren EST-75AM Manuale utente
Steren
Steren LAM-225 Manuale utente
Steren
Steren LAM-235 Manuale utente
Steren
Steren LAM-500 Manuale utente
Steren
Steren LAM-820 Manuale utente
Steren
Steren LAM-020 Manuale utente
Steren
Steren LAM-010 Manuale utente
