Operation & Service Manual (V0) 4 Wireless
5Installation 40
5.1 Unpacking and setup 40
5.2 Switch tube assembly 41
6Operation 42
6.1 Introduction 42
6.2 Safety when hoisting 42
6.3 Linking the column lifts 44
6.4 Control box 45
6.4.1 Emergency shutdown button 45
6.4.2 Starting and identification 45
6.4.3 Raising 48
6.4.4 Lowering 48
6.4.5 Slow lowering 48
6.4.6 Lowering into the safety locks 49
6.4.7 Information screen 49
6.5 Setting the columns 50
6.5.1 Operating system 50
6.5.2 Pair operation 50
6.5.3 Operation of a single column 51
6.6 Operating the pallet lifting mechanism 51
6.7 Running procedures 52
6.7.1 Preparations before operation 52
6.7.2 Raising and lowering 52
6.7.3 Unblocking in case of emergency 53
6.8 Traverse beam (option) 53
6.9 Outdoor use 54
6.10 Adjustable forks 55
7Inspection and maintenance 57
7.1 Aim of maintenance 57
7.2 When you carry out maintenance 57
7.2.1 Recommendations for maintenance 58
7.2.2 Preparations before inspection and maintenance 58
7.2.3 Pay attention to safety 58
7.2.4 Waste disposal 59
7.2.5 Forms and administration 59
7.3 Daily checks by the user 59
7.4 Monthly maintenance 59
7.5 Annual maintenance by the technical service 60
7.6 Regular preventive maintenance procedures 61
7.6.1 Lubrication instructions 61
7.6.2 Hydraulic oil 62
7.6.3 Checking the emergency shutdown mechanism 62
7.6.4 Checking the safety locking feature 63
7.6.5 Checking the safety switch of the pallet lifting mechanism 63
7.6.6 Checking the pneumatic spring(s) 64
7.6.7 Checking the battery capacity 64
7.7 Maintenance switches 66
7.8 Batteries 67
7.9 Programmable settings 67
7.9.1 Height limit 68
7.9.2 Unlock during up 68
7.9.3 Crush limit 68
7.9.4 Height difference guard 68
7.9.5 Height monitoring 69
7.9.6 Odd number of columns 69
7.9.7 Height dimension 69
7.9.8 Language 70
7.9.9 Motor run time hours 70
7.9.10 System run time 70
7.9.11 Long distance 70
