Stihl TS 700 Manuale utente
04-015
1
04-015
14” CUT-OFF SAW
Gas Powered Stihl 700
PROCEDURES:
•Unit will be sent with 50:1 gas mixture, wrench and goggles.
•Use only in well ventilated areas. Gas fumes are hazardous!
•Area must be clear of any debris before cutting.
•Determine what type of material is to be cut. Asphalt, concrete, metal and ductile blades are
available. 6300 rpm or faster are required.
•Blades must have a 20mm arbor.
•SHUTDOWN: Allow engine to idle down approximately 5 minutes to reduce engine heat
from burning protective coating of oil in cylinder.
•Customer should clean air filter after every four hours of usage.
•Customer will be instructed on proper filter and gasket combination. Exploded view diagram
provided on back of page.
•Consult owner’s manual for changing position of blade.
•Customer will be charged for any clean up or damage due to neglect.
SPECIFICATIONS:
2 Cycle Engine
9,800 RPM
50:1 Mixture
6.1 Cu In. - 6.7 bhp
Fuel Capacity: 26.2 oz.
Depth: 4.9”
Arbor: 20 mm
Weight: 26.2 lbs
04-015
2
Troubleshooting:
If the unit does not start:
1. Check to make sure the filter is not completely plugged with concrete dust.
2. Check fuel level.
3. Remove and clean spark plug. Pull start unit without spark plug to remove any excess
fuel from cylinder.
Altri manuali per TS 700
6
Indice
Altri manuali Stihl Sega
Stihl
Stihl MSA 300.0 Manuale utente
Stihl
Stihl MSA 160 T Manuale utente
Stihl
Stihl TSA 230 Manuale utente
Stihl
Stihl FS 500 Manuale utente
Stihl
Stihl MS 500i Manuale utente
Stihl
Stihl TSA 230 Manuale utente
Stihl
Stihl MSA 220 T Manuale utente
Stihl
Stihl TS 440 Manuale utente
Stihl
Stihl 038 Manuale utente
Stihl
Stihl TSA 230 Manuale utente
Stihl
Stihl MS 241 C-M Manuale utente
Stihl
Stihl TS 420 Guida utente
Stihl
Stihl FS 460 C Manuale
Stihl
Stihl MS 241 C-M Manuale utente
Stihl
Stihl TSA 230 Manuale utente
Stihl
Stihl TS 400 Cutquick Manuale
Stihl
Stihl MS 180 Manuale utente
Stihl
Stihl MS 362 Manuale utente
Stihl
Stihl GS 461 Manuale utente
Stihl
Stihl TS 440 Manuale utente
