STONEFLY DR365V-2404 Manuale utente
Setup Guide
DR365V - Backup & Disaster Recovery
Appliance
www.stonefly.com
www.iscsi.com
DR365V-2404 24-bay / 4U Model
This Page is intentionally left blank.
Copyright © 2006-2019 StoneFly, Inc.
All rights are reserved. No part of this document may be photocopied or reproduced without
the prior written consent of StoneFly.
The information contained in this document is subject to change without notice. StoneFly
shall not be liable for errors contained herein or for consequential damages in connection
with the furnishing, performance, or use of this material.
StoneFly, the StoneFly logo, Storage Concentrator, Integrated Storage Concentrator, ISC,
Modular Storage Concentrator, StoneFly Backup Advantage, StoneFusion, StoneFly
Replicator CDP, ValueSAN, Unified Scale Out, USO, Super Scale Out, SSO, Twin Scale
Out, TSO, Unified Storage & Server, USS, Unified Deduplicated Storage, UDS, Unified
Encrypted Storage, UES, OptiSAN, StoneFly Voyager, DR365, DR365 Fusion, StoneFly
Mirroring, Storage Concentrator Virtual Machine, SCVM, Software-Defined Unified
Storage, SDUS, and StoneFly Cloud Drive are property of StoneFly, Inc.
Other brands and their products are trademarks or registered trademarks of their respective
holders.
StoneFly DR365V-2404 Getting Started Guide
V8.0.3x
©StoneFly Inc. 2019 | All rights reserved
Page 3
Table of Contents
1.1 Introduction........................................................................................................5
1.1.1 Icons...................................................................................................................................... 6
2.1. Rack Installation Instructions........................................................................................................ 8
2.2. Power Up & Initial Access.......................................................................................................... 13
2.3. Configuring IPMI KVM ............................................................................................................ 14
2.4. VMware Management Network Configuration .......................................................................... 18
2.5. Steps to Configure SCVM Management Port............................................................................. 25
2.6. Configuring the SCVM............................................................................................................... 29
2.7. Configuring the Veeam Management VM.................................................................................. 36
2.7.1. Assigning a Static IP Address to the Veeam Management VM ......................................... 36
1.1.2 Enabling RDP on the Veeam Management VM................................................................. 40
1.1.3 Accessing Windows Server hosting Veeam ....................................................................... 43
StoneFly DR365V-2404 Getting Started Guide
Introduction
V8.0.3x
©StoneFly Inc. 2019 | All rights reserved
Page 4
Chapter-1: Introduction
StoneFly DR365V-2404 Getting Started Guide
Introduction
V8.0.3x
©StoneFly Inc. 2019 | All rights reserved
Page 5
1.1 Introduction
This document is aimed for system administrators who would like to know how to get started
with StoneFly DR365V Appliance. It describes initial steps for launching the appliance.
The StoneFly DR365V is the ideal purpose-built hyperconverged infrastructure solution for
backup and disaster recovery which also allows you to consolidate all of your server and backup
systems into one easy to manage appliance.
This guide gives an overview of the product, rack mounting instructions and initial installation
procedure. Information for using the features of the StoneFusion software is found in the Storage
Concentrator User Guide.
StoneFly Resource Library:
https://stonefly.com/resources
The StoneFly SCVM™ Webpage:
https://stonefly.com/hyper-converged/scvm-virtual-storage-appliance
Veeam Backup & Replication User Guide for VMware:
https://helpcenter.veeam.com/docs/backup/vsphere/overview.html?ver=95u4
Each StoneFly DR365V comes preconfigured with VMware vSphere, a StoneFly SCVM™
Virtual Storage Controller, and an Enterprise Backup Engine running on a second VM.
Additional Virtual Machines can be installed on the DR365V as needed as long as adequate
processing cores and system memory are available to support those VMs. Contact your StoneFly
sales representative for details.
DR365V-2404 12-Bay / 4U Model
The DR365V comes in five standard configurations:
•12-bay / 2U model features maximum of 12 x 3.5” SAS drives or SSDs
•16-bay / 3U model features maximum of 16 x 3.5” SAS drives or SSDs
•24-bay / 2U model features maximum of 24 x 2.5” SAS drives or SSDs
•24-bay / 4U model features maximum of 24 x 3.5” SAS drives or SSDs
•36-bay / 4U model features maximum of 36 x 3.5” SAS drives or SSDs
StoneFly DR365V-2404 Getting Started Guide
Introduction
V8.0.3x
©StoneFly Inc. 2019 | All rights reserved
Page 6
1.1.1 Icons
Icon Type Description
Note Special instructions or information
Warning Risk of system damage or a loss of data
V8.0.3x
©StoneFly Inc. 2019 | All rights reserved
Page 7
StoneFly DR365V-2404 Getting Started Guide
Initial Installation
Chapter-2: Initial Installation
V8.0.3x
©StoneFly Inc. 2019 | All rights reserved
Page 8
StoneFly DR365V-2404 Getting Started Guide
Initial Installation
2.1. Rack Installation Instructions
This section provides information on installing the StoneFly DR365V appliance into a rack or cabinet
with the rails provided. There are a variety of rack/cabinet units on the market, which may mean that the
assembly procedure will differ slightly. You should also refer to the installation instructions that came
with the rack unit you are using.
NOTE: This rail will fit a rack/cabinet between 26.5" and 36.4" deep.
Identifying the Sections of the Rack Rails
The DR365V appliance package includes one pair of rack rail assemblies in the rack mounting kit. Each
assembly consists of an inner rail that secures the appliance with the chassis and an outer rail that is
attached directly to the rack. The inner rails are etched with “L” (left side) and “R” (right side) to make
them easily distinguishable.
Identifying the Rack Rails
V8.0.3x
©StoneFly Inc. 2019 | All rights reserved
Page 9
StoneFly DR365V-2404 Getting Started Guide
Initial Installation
Locking Tabs
Each inner rail has a locking tab. This tab locks the chassis into place when installed and pushed fully into the
rack. These tabs also lock the chassis in place when fully extended from the rack. This prevents the server from
coming completely out of the rack when the chassis is pulled out for servicing.
Releasing the Inner Rail
Each inner rail has a locking latch. This latch prevents the server from coming completely out
of the rack when the chassis is pulled out for servicing. To mount the rail onto the chassis, first
release the inner rail from the outer rails.
Releasing the Inner Rail from the Outer Rails:
1.
Pull the inner rail out of the outer rail until it is fully extended as illustrated below.
2.
Press the locking tab down to release the inner rail.
3.
Pull the inner rail all the way out.
4.
Repeat for the other outer rail.
Extending and Releasing the Inner Rail
Indice
Altri manuali STONEFLY Hardware di rete
STONEFLY
STONEFLY ISC-808S Manuale utente
STONEFLY
STONEFLY DR365V-1205L Manuale utente
STONEFLY
STONEFLY ISC-1208s Manuale utente
STONEFLY
STONEFLY DR365-1204 Manuale utente
STONEFLY
STONEFLY DR365V-HA Manuale utente
STONEFLY
STONEFLY DR365V-1604 Manuale utente
STONEFLY
STONEFLY DR365V-3605 Manuale utente
STONEFLY
STONEFLY DR365V-HA Manuale utente
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
