13. Heart Rate Settings
To set the Heart Rate function, head to Your Profile page from the homepage by pressing the cog icon in the bottom
right side.
Select the ‘HR Range Alert’ function. The Low HR Limit and High HR Limit should be set following the input of other
information e.g. weight, height.
Slide the slider to blue if you would like receive a notification to your watch if your heart rate goes over or below the
set range.
14. Changing the Watch Display
To set a personalised watch skin, head to Your Profile.
From here select the Skin function, this will display a number of colour options and layouts. Choose the skin that
you prefer. This can be changed at a later date. Use the top left arrow to navigate back to previous page.
15. Heart Rate Monitoring
To monitor your heart rate, wear the watch tightly to your wrist to ensure an accurate reading.
1. Tap the screen on your watch to enter Heart Rate Monitoring Mode .
2. Long-press the screen for 3 seconds to start the test. Press the watch against your wrist tightly to ensure accurate
reading.
3. The test will last for around 15 seconds. While measuring your heart rate the watch will show this icon .
After 20 seconds, the watch will vibrate lightly and display your heart rate.
If the watch cannot pick up your heart rate accurately it will show the high or low icon as follows:
Heart Rate monitor is not for medical use, this feature is just for reference only and does not guarantee an accurate
reading. Please do not use in place of medical guidance/equipment.
16. Battery
You can check the remaining battery of your smart watch on the homepage of your LeClock app. This can be found in
the centre at the top of the Home tab. You can also select the battery level indicator on the date section on the watch
display.
To keep optimal usage, when the battery reaches 30%, the watch will close smart functions automatically and the
battery will only work for some features.
Note: The main Analogue mechanism has a separate battery from the smart module.
The main Analogue mechanism battery is a standard non-rechargeable button cell battery (SR626SW) which needs to
be replaced every 2-3 years. Only the Smart Module has a rechargeable battery that can be charged.
Please contact our Service Dept: service@stormlondon.com for further information on battery change service.
