Strand Lighting R21 Manuale utente

Strand Lighting Offices

The material in this manual is for information purposes only and is subject to change without notice. Strand

Lighting assumes no responsibility for any errors or omissions which may appear in this manual. For comments and

suggestions regarding corrections and/or updates to this manual, please contact your nearest Strand Lighting office.

El contenido de este manual es solamente para información y está sujeto a cambios sin previo aviso. Strand

Lighting no asume responsabilidad por errores o omisiones que puedan aparecer. Cualquier comentario, sugerencia

o corrección con respecto a este manual, favor de dirijirlo a la oficina de Strand Lighting más cercana.

Der Inhalt dieses Handbuches ist nur für Informationszwecke gedacht, Aenderungen sind vorbehalten. Strand

Lighting uebernimmt keine Verantwortung für Fehler oder Irrtuemer, die in diesem Handbuch auftreten. Für

Bemerkungen und Verbesserungsvorschlaege oder Vorschlaege in Bezug auf Korrekturen und/oder

Aktualisierungen in diesem Handbuch, moechten wir Sie bitten, Kontakt mit der naechsten Strand Lighting-

Niederlassung aufzunehmen.

Le matériel décrit dans ce manuel est pour information seulement et est sujet à changements sans préavis. La

compagnie Strand Lighting n'assume aucune responsibilité sur toute erreur ou ommission inscrite dans ce manuel.

Pour tous commentaires ou suggestions concernant des corrections et/ou les mises à jour de ce manuel, veuillez s'll

vous plait contacter le bureau de Strand Lighting le plus proche.

Information contained in this document may not be duplicated in full or in part by any person without prior written

approval of Strand Lighting. Its sole purpose is to provide the user with conceptual information on the equipment

mentioned. The use of this document for all other purposes is specifically prohibited.

Document Number: 2-450186-010

Version as of: 22 June 2011

R21 Powered Raceway Installation Guide

Strand Lighting - Dallas

10911 Petal Street

Dallas, TX 75238

Tel: 214-647-7880

Fax: 214-647-8031

Strand Lighting - New York

267 5th Ave, 4th Floor

New York, NY 10016

Tel: 212-213-8219

Fax: 212-532-2593

Strand Lighting - Asia Limited

Room 6-10, 20/F Delta House 3 On Yiu Street

Shatin, N.T. Hong Kong

Tel: + 852 2757 3033

Fax: + 852 2757 1767

Strand Selecon - Auckland

19-21 Kawana Street

Northcote, Auckland 0627

New Zealand

Tel: +64 9 481 0100

Fax: +64 9 481 0101

Strand Lighting - Europe

Marssteden 152

Enschede 7547 TD

The Netherlands

Tel: +31 53 4500424

Fax: +31 53 4500425

Website:

www.strandlighting.com

R21 Powered Raceway Installation Guide

IMPORTANT SAFEGUARDS

When using electrical equipment, basic safety precautions should always be followed including the following:

a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

b. Do not use outdoors.

c. Do not mount near gas or electric heaters.

d. Equipment should be mounted in locations and at heights where it will not readily be subjected to

tampering by unauthorized personnel.

e. The use of accessory equipment not recommended by the manufacturer may cause an unsafe

condition.

f. Do not use this equipment for other than intended use.

g. Refer service to qualified personnel.

SAVE THESE INSTRUCTIONS.

WARNING: You must have access to a main circuit breaker or other power disconnect device

before installing any wiring. Be sure that power is disconnected by removing fuses or turning the

main circuit breaker off before installation. Installing the device with power on may expose you to

dangerous voltage and damage the device. A qualified electrician must perform this installation.

WARNING: Refer to National Electrical Code® and local codes for cable specifications. Failure to

use proper cable can result in damage to equipment or danger to persons.

WARNING: This equipment is intended for installation in accordance with the National Electric

Code® and local regulations. It is also intended for permanent installation in indoor applications

only. Before any electrical work is performed, disconnect power at the circuit breaker or remove the

fuse to avoid shock or damage to the control. It is recommended that a qualified electrician perform

this installation.

CAUTION: Wire openings MUST have fittings or lining to protect wires/cables from damage. Use

90° C copper wire only! Aluminum wire may not be used.

Installation Guide R21 Powered Raceway

2Table of Contents

TABLE OF CONTENTS

Strand Lighting Offices........................................................................................................Inside Front Cover

Important Safeguards

Table of Contents

Preface

About This Guide ................................................................................................................................................... 3

Additional Resources.............................................................................................................................................. 3

Other Manuals................................................................................................................................................. 3

Additional Resources for DMX512................................................................................................................. 3

Overview

Installation and Checkout Sequence....................................................................................................................... 4

Components

R21 Powered Raceway........................................................................................................................................... 5

Raceway Control Modules ..................................................................................................................................... 6

Dimmer Modules.................................................................................................................................................... 7

Mechanical Considerations

Tools and Supplies.................................................................................................................................................. 8

Installation Location............................................................................................................................................... 8

Wire Routing........................................................................................................................................................... 9

Wiring Requirements.............................................................................................................................................. 9

Installation Procedure

Connecting Sections ............................................................................................................................................. 10

Mounting the Unit ................................................................................................................................................ 10

Single-Pipe Methods ..................................................................................................................................... 10

Double-Pipe Methods.................................................................................................................................... 11

Threaded Rod and Wall Mount Methods...................................................................................................... 11

Connecting Power Wiring .................................................................................................................................... 12

Overview ....................................................................................................................................................... 12

Line Power..................................................................................................................................................... 13

Connecting Control Wiring .................................................................................................................................. 14

Overview ....................................................................................................................................................... 14

DMX512........................................................................................................................................................ 15

Vision.net Networks (SVN/485)................................................................................................................... 16

Termination of Shielded Cable...................................................................................................................... 16

Termination of Ethernet Cable...................................................................................................................... 17

Master/Slave Wiring (DIM96)...................................................................................................................... 18

Panic Input..................................................................................................................................................... 18

Installing Cable Tray (if applicable)..................................................................................................................... 19

Complete and Test ................................................................................................................................................ 19

Maintenance Procedures

Replacing a Dimmer Module................................................................................................................................ 20

Appendix A.

R21 Powered Raceway Dimmer DIP Switch Settings......................................................................................... 21

R21 Powered Raceway Installation Guide

Installation Guide R21 Powered Raceway

4Preface

PREFACE

1. About This Guide

The document provides installation instructions for all configurations of the R21 Powered Raceway.

Please read all instructions before installing or using this product. Retain this guide for future reference.

2. Additional Resources

Other Manuals

For additional operation, maintenance, and setup information, please see the following Strand manuals:

• R21 Powered Raceway Operation and Maintenance Guide

• Dimmer.net Software Manual

Dimmer.net software and manuals may be downloaded at www.strandlighting.com.

Additional Resources for DMX512

For more information on installing DMX512 control systems, the following publication is available for purchase

from the United States Institute for Theatre Technology (USITT), "Recommended Practice for DMX512: A Guide for

Users and Installers, 2nd edition" (ISBN: 9780955703522). USITT Contact Information:

USITT

315 South Crouse Avenue, Suite 200

Syracuse, NY 13210-1844 USA

1-800-938-7488 or 1-315-463-6463

www.usitt.org

Installation and Checkout Sequence 5

R21 Powered Raceway Installation Guide

OVERVIEW

1. Installation and Checkout Sequence

The R21 Powered Raceway is shipped from the factory in a ready-to-install configuration. The following steps will

be required to successfully install the unit(s) at your location:

1) Unpack and Inspect

Remove all components from shipping container(s) and inspect for damage. Compare the equipment you

received to the packing list. If these do not match, contact Strand Lighting Customer Service at: 1-800-

4STRAND (U.S.) or 1-214-647-7880 (international).

2) Review ALL Instructions

Read this entire installation guide before you start the installation.

3) Gather Tools

Obtain all tools and supplies listed in "Tools and Supplies" on page 9.

4) Choose Appropriate Installation Location

Ensure installation location meets the requirements listed in "Installation Location" on page 9.

5) Plan Wire Routing

Decide where line and control wiring will enter the unit.

6) Install Unit

Following the instructions provided in "Installation Procedure" on page 11, mount and wire the unit.

7) Checkout

Perform the steps listed in "Complete and Test" on page 20 to ensure that the unit has been properly installed.

8) Call For Approval

Do not energize the R21 Powered Raceway until the wiring has been approved by an authorized technician. Call

Strand Lighting to schedule an Engineering Checkout.

Installation Guide R21 Powered Raceway

6Components

COMPONENTS

1. R21 Powered Raceway

The R21 Powered Raceway - up to 96 feet long - contains one Raceway Control Module (RCM), up to forty-eight

20A Dual Dimmer Modules, and at least one Power Terminal Box (PTB). The number of Power Terminal Boxes is

determined by the location and the number of necessary power feeds.

Figure 1: R21 Powered Raceway Component Overview

Raceway Control Module (RCM)

Located on Raceway or Rack Mount

Power Feed Multi-conductor Cable

with Strain Relief (optional)

Hanger Bracket

- six types available

Pigtail Receptacle - Standard Length 18"

(choice of stagepin, twistlock, or Edison

connectors)

Dual Dimmer Module

(2400 Watt total)

Focus Button /

LED Indicator

Flush Receptacle (choice of stage pin,

twistlock, or Edison connectors)

1-1/2" Schedule 40 Pipe

(provided by others)

Control Cable

Tray (optional)

Power Terminal Box (PTB)

DMX512 In/Thru Connectors,

RJ45 Ethernet Connector &

Serial Connector (diagnostic)

SIDE VIEW

FRONT VIEW

Power Terminal Box Interior View (Typical)

Ground Terminal

Input

Output Power Wiring

(pre-wired at factory)

Input Power Terminals

Power

Feed

EXAMPLE CONFIGURATION

Raceway Components May Vary

BSee next pages

for detail illustrations

Note: All components are pre-wired

at the factory except terminal box

line input connections.

Raceway Control Modules 7

R21 Powered Raceway Installation Guide

2. Raceway Control Modules

The Raceway Control Module (RCM) is used to configure the R21 Powered Raceway. The RCM comes in two

configurations, a 19-inch "rack mount" configuration for remote applications or a "head end" configuration for local

applications.

Figure 2: Head End RCM Component Detail

Figure 3: Rack Mount RCM Components

SIDE VIEWFRONT VIEW

Status

Menu Navigation

Escape

Button

Display

LEDs

and Enter Buttons

Serial Port

Ethernet

DMX512 In

Port

DMX512-Over-Ethernet Output

(Ethernet Enabled Units)

DMX512 Thru

(DMX Only Units)

- or -

FRONT VIEW

REAR VIEW

Status

Menu Navigation

Escape

Button

Display

LEDs

and Enter Buttons

Ethernet

Vision.net Port

A/C Input

DMX512

Termination

Port

DMX512

Ground

DMX512-Over-Ethernet

Output (Ethernet-Enabled Units)

DMX512 In & Thru

(DMX Only Units)

Data Ports

Panic

Input

Data Port

Enable Switches

Installation Guide R21 Powered Raceway

8Components

3. Dimmer Modules

R21 Powered Raceway Dimmer Modules contain one 20A dual dimmer with 20A (2400W) power shared between

the two dimmers. Each dual dimmer module includes two Focus/LED Indicator buttons, which function as both focus

adjustment controls and status indicators.

Figure 4: Dimmer Module Detail

Focus Button /

LED Indicator

Indice

Altri manuali Strand Lighting Attrezzatura per DJ

Strand Lighting

Strand Lighting 301 Manuale utente

Strand Lighting

Strand Lighting Quartet Series Manuale utente

Strand Lighting

Strand Lighting 200 Series Manuale utente

Strand Lighting

Strand Lighting NEO Manuale utente

Manuali Attrezzatura per DJ popolari di altre marche

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuale del proprietario

Chauvet

Chauvet OVATION E-930VW Manuale utente

Zumtobel

Zumtobel APHRODITE Home Manuale utente

Snow Masters

Snow Masters Zig Oscillator Manuale utente

EuroLite

EuroLite 50530554 Manuale utente

Beamz

Beamz BUV243 Manuale utente

thomann

thomann Stairville DJ Lase 40-G MK-III Manuale utente

Eagletone

Eagletone 6 Eyes Flower Manuale utente

EuroLite

EuroLite FLD-1508 Manuale utente

Technical Pro

Technical Pro LG8xSEA Manuale utente

JB Systems

JB Systems Lounge Laser DMX Manuale utente

Lightmaxx

Lightmaxx Vega Halo 90 Manuale utente

Elation

Elation FUZE WASH Z350 Manuale utente

Maverick

Maverick MK3 WASH Manuale utente

Infinity

Infinity TF-260C7 Fresnel Manuale utente

Chauvet

Chauvet EVE E-50Z Manuale utente

Eliminator Lighting

Eliminator Lighting E 138 Manuale utente

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuale utente