Strand Lighting 65161 Manuale utente

65168 & 65168-1 - Eight Port DMX512 Network Nodes

65161 - Single Port

DMX512 Network Node

65163 - Three Port

DMX512 Network Node

Strand Lighting Offices

The material in this manual is for information purposes only and is subject to change without notice. Strand

Lighting assumes no responsibility for any errors or omissions which may appear in this manual. For comments and

suggestions regarding corrections and/or updates to this manual, please visit the Strand Lighting web site at

www.strandlighting.com or contact your nearest Strand Lighting office.

El contenido de este manual es solamente para información y está sujeto a cambios sin previo aviso. Strand

Lighting no asume responsabilidad por errores o omisiones que puedan aparecer. Cualquier comentario, sugerencia

o corrección con respecto a este manual, favor de dirijirlo a la oficina de Strand Lighting más cercana. Der Inhalt

dieses Handbuches ist nur für Informationszwecke gedacht, Aenderungen sind vorbehalten. Strand Lighting

uebernimmt keine Verantwortung für Fehler oder Irrtuemer, die in diesem Handbuch auftreten. Für Bemerkungen

und Verbesserungsvorschlaege oder Vorschlaege in Bezug auf Korrekturen und/oder

Aktualisierungen in diesem Handbuch, moechten wir Sie bitten, Kontakt mit der naechsten Strand Lighting-

Niederlassung aufzunehmen.

Le matériel décrit dans ce manuel est pour information seulement et est sujet à changements sans préavis. La

compagnie Strand Lighting n'assume aucune responsibilité sur toute erreur ou ommission inscrite dans ce

manuel. Pour tous commentaires ou suggestions concernant des corrections et/ou les mises à jour de ce manuel,

veuillez s'il vous plait contacter le bureau de Strand Lighting le plus proche.

Note: Information contained in this document may not be duplicated in full or in part by any person without prior

written approval of Strand Lighting. Its sole purpose is to provide the user with conceptual information on the equipment

mentioned. The use of this document for all other purposes is specifically prohibited.

Document Number: 02.8100.0001

Version as of: 27 June 2016

DMX512 Networking Node QuickStart Guide

Strand Lighting - Dallas 10911 Petal

Street

Dallas, TX 75238

Tel: 214-647-7880

Fax: 214-647-8031

Strand Lighting - Asia Limited Unit

C, 14/F, Roxy Industrial Centre No.

41-49 Kwai Cheong Road

Kwai Chung, N.T., Hong Kong

Tel: +852 2796 9786

Fax: +852 2798 6545

Strand Lighting - Auckland

19-21 Kawana Street

Northcote, Auckland 0627

New Zealand

Tel: +64 9 481 0100

Fax: +64 9 481 0101

Strand Lighting - Europe

Rondweg zuid 85

Winterswijk 7102 JD

The Netherlands

Tel: +31 (0) 543-542516

Website:

www.strandlighting.com

DMX512 Network Nodes QuickStart Guide

IMPORTANT INFORMATION

Warnings and Notices

Additional Resources for DMX512

For more information on installing DMX512 control systems, the following publication is available for purchase

from the United States Institute for Theatre Technology (USITT), "Recommended Practice for DMX512: A Guide

for Users and Installers, 2nd edition" (ISBN: 9780955703522). USITT Contact Information:

USITT

6443 Ridings Road

Syracuse, NY 13206-1111 USA

1-800-93USITT

www.usitt.org

Strand Lighting Limited Two-Year Warranty

Strand Lighting offers a two-year limited warranty of its products against defects in materials or

workmanship from the date of delivery. A copy of Strand Lighting two-year limited warranty containing

specific terms and conditions can be obtained from the Strand Lighting web site at

www.strandlighting.com or by contacting your local Strand Lighting office.

When using electrical equipment, basic safety precautions should always be followed including the following:

a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

b. For indoor, dry locations use only. Do not use outdoors.

c. Do not mount near gas or electric heaters.

d. Equipment should be mounted in locations and at heights where it will not readily be subjected to

tampering by unauthorized personnel.

e. The use of accessory equipment not recommended by the manufacturer may cause an unsafe

condition.

f. Not for residential use. Do not use this equipment for other than its intended use.

g. Refer service to qualified personnel.

SAVE THESE INSTRUCTIONS.

WARNING: You must have access to a main circuit breaker or other power disconnect device

before installing any wiring. Be sure that power is disconnected by removing fuses or turning the

main circuit breaker off before installation. Installing the device with power on may expose you to

dangerous voltages and damage the device. A qualified electrician must perform this installation.

WARNING: Refer to National Electrical Code® and local codes for cable specifications. Failure to

use proper cable can result in damage to equipment or danger to personnel.

WARNING: This equipment is intended for installation in accordance with the National Electric

Code® and local regulations. It is also intended for installation in indoor applications only. Before

any electrical work is performed, disconnect power at the circuit breaker or remove the fuse to avoid

shock or damage to the control. It is recommended that a qualified electrician perform this

installation.

QuickStart Guide DMX512 Network Nodes

2TABLE OF CONTENTS

TABLE OF CONTENTS

Strand Lighting Offices ....................................................................................................... Inside Front Cover

IMPORTANT INFORMATION

Warnings and Notices...................................................................................................................................... 1

Additional Resources for DMX512................................................................................................................. 1

Strand Lighting Limited Two-Year Warranty..................................................................................... 1

TABLE OF CONTENTS

PREFACE

About this Manual .................................................................................................................................................. 3

Getting Started ........................................................................................................................................................ 3

Unpack DMX512 Network Node.................................................................................................................... 3

DMX512 NETWORKING NODES - OVERVIEW

DMX512 Network Node Components ................................................................................................................... 4

65161 - Single Port Node ................................................................................................................................ 4

65163 - Three Port Node ................................................................................................................................. 5

65168 - Eight Port Nodes ................................................................................................................................ 6

INSTALLATION

Power Requirements............................................................................................................................................... 7

POE (Power Over Ethernet) Models (65161 or 65163) .................................................................................. 7

Rackmount Models (65168 or 65168-1) ......................................................................................................... 7

Connecting a DMX512 Network............................................................................................................................ 7

Mounting - 65161 / 65163 Models ......................................................................................................................... 7

Installation - 65161 or 65163 Flush Wall Mounting ....................................................................................... 8

Installation - 65161 or 65163 Surface Mounting ............................................................................................ 8

Installation - 65161 or 65163 Truss Mounting................................................................................................ 8

Mounting - 65158 or 65158-1 Models.................................................................................................................... 9

OPERATION

Overview............................................................................................................................................................... 10

Node Configuration .............................................................................................................................................. 10

Pre-Configuring DMX512 Network Nodes .................................................................................................. 10

PRODUCT SPECIFICATIONS

DMX512 Network Node - Single Port (catalog number 65161).......................................................................... 11

DMX512 Network Node - Three Port (catalog number 65163)........................................................................... 12

DMX512 Network Node - Eight Port (catalog number 65168) ........................................................................... 13

DMX512 Network Node - Eight Port (catalog number 65168-1)........................................................................ 13

About this Manual 3

DMX512 Network Nodes QuickStart Guide

PREFACE

1. About this Manual

The document is intended for experienced and trained installers and provides installation and operation instructions

for the following products:

• DMX512 Network Node, POE, Single-Port, 1-Gang (Catalog Number 65161)

• DMX512 Network Node, POE, Three-Port, 2-Gang (Catalog Number 65163)

• DMX512 Network Node, 8-Port, Phoenix Connectors, 1U Rackmount Enclosure (Catalog Number 65168)

• DMX512 Network Node, 8-Port, 5-Pin XLR Connectors, 1U Rackmount Enclosure (Catalog Number 65168-1)

Please read all instructions before installing or using this product. Retain this manual for future reference. Additional

product information and descriptions may be downloaded at www.strandlighting.com.

2. Getting Started

Unpack DMX512 Network Node

Unpack the node from the packaging and check that all components are contained within.If anyparts are missing, or

damaged, please contact the carrier and your nearest Strand Lighting office.

DMX512 Network Node - Single Port (catalog number 65161):

• DMX512 Networking Node, 1 Port, POE, 1-Gang

•QuickStart Guide (this document)

•Single Gang Back Box with RJ45 connector

•Truss hook and mounting bolt (for truss mounting)

•Four rubber, screw-infeet (for tabletop)

•Two hole plugs (if surface or flush mounted)

DMX512 Network Node - Three Port (catalog number 65163):

• DMX512 Networking Node, 3 Port, POE, 2-Gang

• QuickStart Guide (this document)

• Double Gang Back Box with RJ45 connector

• Truss hook and mounting bolt (for truss mounting)

• Four rubber, screw-in feet (for tabletop)

• Two hole plugs (if surface or flush mounted)

DMX512 Network Node - Eight Port (catalog number 65168):

• DMX512 Networking Node, 8 Port, Phoenix Connectors, 1U Rackmount Enclosure with Internal Power Supply

• QuickStart Guide (this document)

• Input power cable (IEC type - 1 each - US, UK, and EU)

DMX512 Network Node - Eight Port (catalog number 65168-1):

• DMX512 Networking Node, 8 Port, 5-Pin XLR Connectors, 1U Rackmount Enclosure with Internal Power Supply

• QuickStart Guide (this document)

• Input power cable ((IEC type - 1 each - US, UK, and EU)

QuickStart Guide DMX512 Network Nodes

4DMX512 NETWORKING NODES - OVERVIEW

DMX512 NETWORKING NODES - OVERVIEW

1. DMX512 Network Node Components

65161 - Single Port Node

DMX512

Connection (XLR5F)

NOTE: Unit can be flush mounted, surface mounted, or hung in truss.

Local Area Network

DMX512 Network Status LED

(LAN) Status LED

C-Clamp

Removable Rubber Feet (x4)

Network (POE) Connection

DMX512 Network Node Components 5

DMX512 Network Nodes QuickStart Guide

65163 - Three Port Node

DMX512 Connections

(3 Each, XLR5F)

LCD Information

Network Connection

(Not for POE)

Display

LCD Control

Rotary Button

NOTE: Unit can be flush mounted, surface mounted, or hung in truss.

Network (for POE) Connection

C-Clamp

Removable Rubber Feet (x4)

QuickStart Guide DMX512 Network Nodes

6DMX512 NETWORKING NODES - OVERVIEW

65168 - Eight Port Nodes

POWER INLET

100-250 VAC

.25 AMP 50-60 HZ

0.30 250V AMP SLOW FUSE

LAN 2 LAN 1

SHIELD

D-

D+

D2-

D2+

SHIELD

D-

D+

D2-

D2+

SHIELD

D-

D+

D2-

D2+

SHIELD

D-

D+

D2-

D2+

SHIELD

D-

D+

D2-

D2+

SHIELD

D-

D+

D2-

D2+

SHIELD

D-

D+

D2-

D2+

SHIELD

D-

D+

D2-

D2+

DMX 8 DMX 7 DMX 6 DMX 5 DMX 4 DMX 3 DMX 2 DMX 1

LAN 2 LAN 1 DMX 8 DMX 7 DMX 6 DMX 5 DMX 4 DMX 3 DMX 2 DMX 1

POWER INLET

100-250 VAC

.25 AMP 50-60 HZ

0.30 250V AMP SLOW FUSE

Local Area Network (LAN) 1

Ethernet Connection (RJ45)

AC Input Power

(input cable included with unit)

Rackmount Ear (x2, removable)

Local Area Network (LAN) 2

Ethernet Connection (RJ45)

Fuse (x2)

Compartment

DMX512 Connections

(8 Each, 5 Pin Phoenix Connectors)

Front of Unit (All 8-Port Models)

Rear of Unit (5-Pin Phoenix Connector Models)

LCD Control

Rotary Button

LCD Information

Display

Rear of Unit (5-Pin XLR5F Connector Models)

Fuse (x2)

Compartment Local Area Network (LAN) 1

Ethernet Connection (RJ45)

Local Area Network (LAN) 2

Ethernet Connection (RJ45)

DMX512 Connections

(8 Each, 5 Pin XLR5F Connectors)

AC Input Power

(input cable included with unit)

Power Requirements 7

DMX512 Network Nodes QuickStart Guide

INSTALLATION

1. Power Requirements

POE (Power Over Ethernet) Models (65161 or 65163)

All portable DMX512 Network Nodes are powered from a POE (Power Over Ethernet) compatible Ethernet Switch

or midspan/endspan POE injector using IEEE P802.3af-2003 power. The POE should be +48vdc. The unit shall draw

45mA with LCD backlight at full (65163 models only).

Rackmount Models (65168 or 65168-1)

Rackmount DMX512 Network Nodes are powered from standard AC wall sockets through the provided AC input

cable. The unit is auto-ranging from 100 - 240 VAC and the nominal current draw is 0.25 Amps with the LCD display

backlight at full.

Note: For all rackmount models, the socket-outlet shall be installed near the equipment and shall be easily

accessible. WARNING: Double Pole/Neutral Fusing / AVERTISSEMENT: Double Pole / Fusing Neutre.

2. Connecting a DMX512 Network

Basic DMX512 installation consists of connecting a DMX512 Network Node to a DMX512 controller in "daisy-

chain" fashion. A cable runs from the DMX512 controller to a DMX512 Network Node and to other DMX512

devices in the system. Note, the DMX512 Network Node does not have to be first device in the DMX512 signal

chain.

For more information on DMX512 networking and systems, refer to "Additional Resources for DMX512" on page 1.

3. Mounting - 65161 / 65163 Models

The 65161 DMX512 Network Node includes the faceplate, electronics, and a single-gang back box. This unit is

suitable for flush or surface wall mounting, sitting on a flat surface or hung in a truss (truss hook and mounting bolt

are included).

The 65163 DMX512 Network Node includes the faceplate, electronics, and a two-gang back box. This unit is suitable

for flush or surface wall mounting, sitting on a flat surface or hung in a truss (truss hook and mounting bolt are

included).

PUSH

DMX512 Connections

DMX512 Signal XLR Pin

Common (Drain) 1

DMX512 - 2

DMX512 + 3

No Connection 4

No Connection 5

XLR5F Type Connectors

DMX512 Connections

DMX512 Signal Phoenix Pin

Common (Drain) 1

DMX512 - (LAN1) 2

DMX512 + (LAN1) 3

No Connection 4

No Connection 5

5-Pin Phoenix Type

Connectors

SHIELD

D-

D+

D2-

D2+

DMX 8

12345

QuickStart Guide DMX512 Network Nodes

8INSTALLATION

Note: Installation should be done in full compliance of local and national codes.

Installation - 65161 or 65163 Flush Wall Mounting

To flush mount a 65151 or 65163 DMX512 Network Node:

Step 1. Determine a suitable location for unit to be installed.

Step 2. Prepare the wall by cutting an appropriate sized hole for the unit’s back box.

CAUTION: Before continuing, note that faceplate electronics is connected to a short internal Ethernet cable. Do not

damage cable in next step.

Step 3. If installed, remove faceplate with electronics from back box. Disconnect internal Ethernet cable from rear

of faceplate electronics. Set aside so faceplate and its electronics are safe from damage.

Step 4. Insert two supplied hole plugs into top of unit.

Step 5. Insert the back box in the wall and secure back box to structure using suitable hardware (by others).

Step 6. Connect network Ethernet cable to RJ45 connector on side of back box.

Step 7. Reconnect internal Ethernet cable to faceplate electronics.

Step 8. Reinstall faceplate.

Installation - 65161 or 65163 Surface Mounting

To surface mount a 65151 or 65163 DMX512 Network Node:

Step 1. Determine a suitable location for unit to be installed.

CAUTION: Before continuing, note that faceplate electronics is connected to a short internal Ethernet cable. Do not

damage cable in next step.

Step 2. If installed, remove faceplate with electronics from back box. Disconnect internal Ethernet cable from rear

of faceplate electronics. Set aside so faceplate and its electronics are safe from damage.

Step 3. Ensure that the back box is level by placing a spirit level on top of the box and mark the four mounting

holes.

Step 4. Drill four (4) holes in the wall and secure the back box to the wall using screws and suitable hardware (by

others).

Step 5. Reconnect internal Ethernet cable to faceplate electronics.

Step 6. Insert two supplied hole plugs into top of unit.

Step 7. Reinstall faceplate.

Step 8. The unit is ready for connection to network.

Installation - 65161 or 65163 Truss Mounting

To truss mount a 65151 or 65163 DMX512 Network Node:

CAUTION: Before proceeding, note that faceplate electronics is connected to a short internal Ethernet cable. Do not

damage cable in next step.

Step 1. If installed, remove faceplate with electronics from back box. Disconnect internal Ethernet cable from rear

of faceplate electronics. Set aside so faceplate and its electronics are safe from damage.

Step 2. Using supplied bolt, slide Belleville washer over bolt so washer will compress against back box when

tightened.

Step 3. Working inside of back box, insert bolt with washer through hole in top of back box.

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente