Structura Mac Manuale utente

Stuctura, Inc. |9635 Widmer Rd., Lenexa, KS 66215 |913.390.8787 |www.structura.com

Mac/Mac II

Installation Instructions

Warnings

CAUTION—risk of fire and this product must be installed

in accordance with the applicable installation code by a

person familiar with the construction and operation of the

product and the hazards involved.

Suitable for wet locations.

Mounting orientation must have light source facing down.

Electrical service must be disconnected during installation.

Proper grounding is required to protect against shock and

proper operation.

Tools Required

5/64” Allen wrench for 8-32 set screws

9/16” socket for 3/8” threaded rod assemblies

Philips drive for driver box lid

Wiring tools and connectors

Bollard Installation

Step 1: Turn off power to location.

Step 2: Tighten (4) 8-32 set screws into bollard sides to

allow for LED module and cap removal.

Step 3: Loosen (2) 3/8”-16 thread rod assembly until

baseplate is removable.

Step 4: Attach baseplate to pre-installed 3/8”-16 anchor

bolts. Make sure baseplate is level.

Step 5: Connect power to LED driver in driver

compartment. See page 2 for driver wiring.

Step 6: Place bollard upright onto baseplate.

Step 7: Retighten threaded rod to secure bollard body to

baseplate.

Step 8: Place LED module and cap back into top of bollard

and secure by looseninng set screws.

Step 9: Turn power back on.

8-32 x 1”

Set Screw

3/8”-16

Threaded Rod

3/8”-16

Coupling Nut

Driver

Compartment

LED Module

Step 2

Stuctura, Inc. |9635 Widmer Rd., Lenexa, KS 66215 |913.390.8787 |www.structura.com

Mac/Mac II

Installation Instructions

10"

5.5"

Bollard Wiring

Step 1: Connect input power to driver pigtail as shown

above.

Step 2: Connect dimming wires to remote dimmer (by

others) if applicable.

Step 3: Connect grounding wire to ground pigtail attached

to driver box tray.

LED Module

AC/N (White)

AC/L (Black)

Input

100-277V 18-54V

Dim+ (Purple)

Dim- (Grey)

Ground

Connected to

Bollard Frame

Base Detail

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali structura Luce esterna

structura

structura Duo Bollard Manuale utente

Manuali Luce esterna popolari di altre marche

Sealey

Sealey LED37 Manuale utente

nordlux

nordlux VEJERS Guida utente

SImx

SImx ELITE LED LHTC637 Manuale utente

GEV

GEV CAROLINE 10833 Manuale utente

NEBO

NEBO NEB-LSP-0020 Manuale utente

WE-EF

WE-EF PFL540 LED Manuale utente

Lindby

Lindby 9949029 Manuale utente

HEPER

HEPER DOGO Side LW6048.585-US Istruzioni per l'installazione e il funzionamento

HEPER

HEPER LW8034.003-US Istruzioni per l'installazione e il funzionamento

Maretti

Maretti VIBE S 14.6080.04.A Manuale utente

BEGA

BEGA 84 253 Manuale

HEPER

HEPER MINIMO Istruzioni per l'installazione e il funzionamento

LIGMAN

LIGMAN BAMBOO 3 Manuale utente

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manuale utente

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manuale utente

urban ambiance

urban ambiance UQL1273 Manuale utente

TotalPond

TotalPond 52238 Manuale utente

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manuale utente

structura Mac Manuale utente

Manuali Luce esterna popolari di altre marche