General safety precautions
1. The machine must be installed in compliance with local safety regulations. All
functions on the machine and any connected equipment must be in working
order.
2. This device must be mounted securely on the machine.
3. The operator must read the safety precautions and Instruction Manual, as
well as relevant sections of the manuals for any connected equipment and
accessories.
4. If you observe malfunctions or hear unusual noises, switch off the machine
and call technical service.
5. In case of fire, alert bystanders and the fire brigade. Disconnect the electrical
power supply. Use a powder fire extinguisher. Do not use water.
6. This machine must be operated and maintained only by skilled/trained
personnel.
7. Always switch off the electrical power supply and remove the plug or power
cable before dismantling the machine or installing additional components.
8. The machine must be disconnected from the electrical power supply before
any service. Wait 5 minutes until residual potential on the capacitors is
discharged.
9. Struers equipment must only be used in connection with and as described in
the Instruction Manual supplied with the equipment.
10. If the equipment is subjected to misuse, incorrect installation, alteration,
neglect, accident or incorrect repair, Struers will accept no responsibility for
damage to the user or the equipment.
11. Dismantling of any part of the equipment, during service or repair, should
always be performed by a qualified technician (electromechanical, electronic,
mechanical, pneumatic, etc.).
2.3 Safety messages
Struers uses the following signs to indicate potential hazards.
ELECTRICAL HAZARD
This sign indicates an electrical hazard which, if not avoided, will
result in death or serious injury.
DANGER
This sign indicates a hazard with a high level of risk which, if not
avoided, will result in death or serious injury.
6 LaboUI
2 Safety
