STRUMENTO MARINO SM133 Manuale utente
User Manual
Swiss ISA Movement 8270B
YACHTING TIMER
ref.code SM133
STRUMENTOMARINO.IT
1
3
4
5
7(Button A)
8
9
10(Button B)
6
2
321
BATTERY: SR927W
BATTERY LIFE: 2 YEARS
Crown
1. Countdown indicator (10 minutes maximum)
2. Hour/second counter to display
- Countdown seconds
- Race timing hours
- Number of hours and seconds counted
3. Hour hand
4. Date window
5. Minute hand
6. Central hand to display:
- Countdown minutes
- Race timing minutes
7. Push button A: start/stop
8. Small second hand
9. Crown position:
1. Normal running
2. Quick correction of date; alarm
3. Correction of hour, minute, date
10. Push button B
- Reset
- Countdown timer setting
- Second chance count down adjustment
- Select the display of hours/seconds counted at the 10H
counter
PUSHERS AND INDICATIONS
SET THE TIME
• Pull the crown to position 3.
• Turn the crown anti-clockwise to set the time of the day
(hour & minute) and the date.
• Push the crown to position 1.
Attention
- The date changes at 00:00 midnight, not at 12:00 noon.
- Make sure that the AM/PM is set correctly, or the date
will not change correctly.
SET THE DATE
• Pull the crown to position 2.
• Turn the crown clockwise to move the date to the
desired position.
• Push the crown to position 1.
Attention
- Do not do quick date correction between 21:00 and 00:30.
TO SET THE TIME AND DATE
TO SET THE COUNTDOWN (TIMER)
Attention
The countdown can only be set when countdown or raicing
functions timer are adjusted.
The countdown timer allows the user to choose the time to be
counted down up to the start of race timing.
The user can set the countdown duration between 10 minutes
and 1 minute. Adjustment of countdown is not allowed during
the last minute.
• Press B for ~ 1 second to enter into the setting mode, 1
beep emits.
• After 1 second, press B step-by-step to set the central
hand in order to define the duration of countdown.
Between the positions of 0 minute and 10 minutes, the central
hand advances fast automatically to “10 min.”.
Exit automatically from the setting mode if there has been no
action on B for 3 seconds, 1 beep emits.
10(B) 10(B)
(Refer to countdown adjustment section).
• Press A to activate the countdown, 2 beeps emit.
• The small counter hand at 10H turns fast to make a turn and
stop shortly at “60”, then countdown starts.
• When countdown starts, the small counter hand at 10H
indicates the seconds (1 step every 2 seconds); the central
counter hand displays the minutes (1 step every 2.4 seconds).
ACTIVATION OF COUNTDOWN (TIMER)
in progress
Display of countdown minutes
Display of countdown seconds
7(A)
COUNTDOWN PROGRESS BEEPER (TIMER)
Once countdown is activated, there are beepers to
communicate to the user about the progress of the countdown.
• During countdown, 2 beeps emit every minute up to the last
minute.
Then:
• 50” before the end of countdown, 1 beep emits.
• 40” before the end of countdown, 1 beep emits.
• 30” before the end of countdown, 2 beeps emit.
• 20” before the end of countdown, 2 beeps emit.
• 10” before the end of countdown, 1 beep emits every
second to indicate the end of countdown.
At the end of countdown, 1 long beep emits lasting for 1 second
to communicate to the user that the countdown reaches zero,
and the race timing function begins.
The user can at anytime during the countdown period adjust the
countdown timer, except the last minute.
Example:
If the countdown was set at 10 minutes at the beginning with
delay:
• The user can, during the countdown runs, adjust it to 9 min. by
pressing B.
• The central minute chronograph hand will move from “10
min.” to “9 min.”.
The small counter hand at 10H will advance fast to make a
turn, and stops shortly at “60”, then it continues to count and
display the countdown seconds.
Attention:
This function does not operate when the countdown is set at 1
minute, or when the racing timer is in use.
“SECOND CHANCE” COUNTDOWN ADJUSTMENT
10(B)
CHRONOGRAPH (until 96 hours)
• When countdown is finished, race timing starts automatically.
• The central minute counter hand displays the race timing
minutes (1 step every 12 seconds). The small hand at 10H
counter displays the race timing hours from 0 hour to 24 hours,
up to 96 hours maximum (1 step every hour). Between “24”
and “0”, the small counter hand advances fast.
• Press B to display race timing seconds at 10H counter.
The display of race timing seconds last for 1 minute at
maximum (1 step every 2 seconds). During the display
of race timing seconds, another press on B can switch it to
display race timing hours.
• The race timing function allows the measurement of a
duration of 96 hours at maximum (= 4 days), then stops. At the
end of the race timing, the small counter hand at 10H will rest
at “0”, and the central hand will rest at “12”.
10(B)
Press B to display
the race/timing
hours/seconds
at the 10H counter
Date of arrival
Departure date
Stop:
• Press A to stop the racing timer, 1 beep emits to confirm the
racing timer «OFF».
Start:
• Press A again to start the race timing function, 2 beeps emit
to confirm that the racing timer is engaged «ON».
RACING TIMER START/STOP
OFF ON
7(A)
7(A)
Indice
