Stryker 240-031-050 Manuale utente
1
32”4K Surgical Display
240-031-050
2
Warning and Cautions
Please read this manual and follow its instructions carefully. The words warning, caution, and note carry special
meanings and should be carefully reviewed:
Warning: Indicates measures to avoid potential serious injury to the user and the patient.
Caution: Indicates risks to the equipment. Failure to follow cautions may result in product damage.
Note: Provides special information to clarify instructions or present additional useful information.
Warnings
To avoid potential serious injury to the user and the patient, please note the following warnings:
1. Read this manual thoroughly and be familiar with its contents prior to using this device.
2. Federal law (United States of America) restricts this device to sale by, or on the order of, a physician.
3. Carefully unpack the device and check if any damage occurred during shipment.
4. This device is non-sterile and therefore should not be placed in the sterile field.
5. Do not place the device or any other heavy object on the power cord. Damage to the cable can cause fire or electric
shock.
6. To avoid electric shock, avoid removing the bezel.
7. This device should not be used adjacent to or stacked with other devices. If adjacent or stacked use is necessary, the
device should be observed to verify normal operation in the configuration in which it will be used.
8. Test this device prior to a surgical procedure. This device was fully tested at the factory before shipment.
9. Do not attempt internal repairs or adjustments not specifically detailed in this manual. Ensure that readjustments,
modifications, and/or repairs are carried out by persons authorized by Stryker Endoscopy.
10. Do not put any object into the panel. If this occurs, unplug the device and have it checked by qualified personnel
before operating it any further.
11. Use appropriate caution to prevent contact with fluids if the device is being used with a power supply in patient
environments.
12. The use of cables and/or other accessories with this device, other than those specified, may result in increased
emissions or decreased immunity of this device.
13. AC adapter is not protected against water. DO NOT expose AC adapter to water
3
Cautions
1. Connect the device to an AC adapter connected to a hospital grade power cord ensuring the power cord is plugged
into a grounded power outlet to achieve grounding reliability.
2. Do not sterilize the device, as the delicate electronics cannot withstand this procedure.
3. Use only the proprietary surgical display power supply for the display. Completely secure the connection between the
DC power cord and the extension cord.
4. Never operate the device immediately after transportation from a cold location to a warm location.
5. To connect to an international power supply, use an attachment plug appropriate for the power outlet
6. Unplug the device if it is not to be used for an extended period of time. To disconnect the cord, unscrew the plug first,
then pull the cord out by the plug. Never pull the cord itself.
7. Do not expose the device to moisture or apply liquid cleaners directly to the screen. Spray the cleaning solution onto a
soft cloth and clean gently. For further detail, refer to the "Cleaning and Maintenance" section of this manual.
8. Allow adequate air circulation to prevent internal heat buildup. Do not place the device on surfaces (rugs, blankets,
etc.) or near materials (curtains, draperies) that may block the ventilation slots. The device is cooled by natural
convection and has no fan.
9. Do not touch the patient with signal input or output connectors. Equipment with SIP/SOP connectors should either
comply with IEC 60601-1 and/or IEC 60601-1-1 harmonized national standards or the combination should be evaluated
for safety.
10. To ensure electromagnetic compatibility, refer to the “Electromagnetic Compatibility”section of this manual. The 32”
4K Surgical Display (240-031-050) must be installed and operated according to the EMC information provided in this
manual.
11. Pay close attention to the cleaning instructions in this manual. A deviation may cause damage.
12. Do not install the device near sunlight, excessive dust, mechanical vibration, or shock.
13. Do not position the device so that it is difficult to disconnect the power cord from the supply mains.
14. Do not operate with the glass device screen facing downward.
15. Handle the device with care. Do not strike or scratch the screen.
16. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the device.
17. Note: This device has been tested and found to comply with the limit for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. There is no
guarantee that interference will not occur in a particular installation, which can be determined by turning the device
off and on. The user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving device.
•Increase the separation distance between the device.
4
•Connect the device to an outlet on a circuit different from that to which the other device(s) are connected.
•Consult the manufacturer or field service technician for help.
The warranty is void if any of these warnings or cautions is disregarded.
This product contains electrical waste or electronic equipment. It must not be disposed of as unsorted municipal waste
and must be collected separately.
5
About Your Device
32”4K Surgical Display
REF: 240-031-050
32”4K Surgical Display is 32”LED Display is a wide screen LED surgical display that can support a maximum resolution of
UHD (4096 x 2160). The display supports the following video inputs: digital RGB (DVI), HDMI and HDMI (4K). It supports
serial communication via the RS232 port and SDC SIDNE port. It also supports USB ports (2) for 5V, 1A power supply for
accessories and peripherals.
Intended Use
32”4K Surgical Display is intended for video display during surgical procedures. The display is a non-sterile reusable
device not intended for use in the sterile field. The display is intended for use by qualified physicians having complete
knowledge of these surgical procedures.
Indications for Use
General Surgical Population
Contraindications:
There are no known contraindications for this device.
6
Package Contents
x4
Part Number
Package Contents
240-031-050
32”4K Surgical Display
-
(4) M4 x 16mm VESA screws
-
Hospital-grade AC power cord
0240-031-004
Medical Power Supply
Model : BPM150S24F11 (Bridgepower)
-
HDMI Cable
-
Cable Cover
Part Number
Optional Accessories
0240-030-951
15-ft. (5 pin) DC extension cable
Model: 1501047***(Bridgepower) ***: blank or
001~999
0240-030-952
75-ft. (5 pin) DC extension cable
Model: 1501047***(Bridgepower) ***: blank or
001~999
7
Device Features
Front panel
1. Auxiliary device status LED shines red to indicate an active connection to a connected device
2. Display Screen Shows video image
3. Power switch(soft) Powers the display ON and OFF.
4. Power LED* Indicates current status
5. PIP Accesses the Picture in Picture adjustment menu.
6. Bright Accesses the Brightness adjustment menu.
7. Specialty Accesses the Specialty selection menu.
8. Input Access the Input selection menu.
9. Rotary control Access the on-screen and navigates through its function.
10. Logo Light Indicates current status.
*: Refer to following Power management menu
8
This system saves energy by switching your monitor into a low-mode when is has not been used for a certain period of
time. Power Management system operates with a VESA DPMS compliant video card installed in your computer. You use
a software utility installed on your computer to set up this feature.
State
Normal
Operation
DPMS Standby
DPMS suspend
DPM Off
Horizontal Sync
Active
Inactive
Active
Inactive
Vertical Sync
Active
Active
Inactive
Inactive
Video
Active
Blanked
Blanked
Blanked
Power LED
GREEN
Green Flashing
Green Flashing
Green Flashing
Logo Light
White
Breathing Light
Breathing Light
Breathing Light
Power
Consumption
TBD
TBD
TBD
TBD
NOTE : This monitor automatically returns to normal operation when horizontal and vertical sync return. This occurs
when you move the computer’s mouse or press a key on the keyboard.
9
Rear Panel
1. Accessory mount Provide an access point for mounting optional accessories.
2. VESA mounting holes Provide access point for mounting the display. (100x100, 200x100)
3. Power switch (hard) Powers the input DC power On and OFF.
4. Handles Aid in display positioning
Caution: The handles are not intended to bear the entire weight of the display.
5. Cable cover hinges Attach the bottom of the cable cover to the display
6. Velcro straps Straps aid in cable management.
7. Cable cover Covers and conceals cables.
8. Cable cover clips Attach the top of the cable cover to the display.
10
Cable Cover
Installing the Cable Cover
1. Align the left and right hinges of the cable cover onto the bottom rear of the display.
2. Snap on the top section of the cable cover to the aligning clips.
Removing the Cable Cover
1. Pinch the left and right clips and pull the cable cover towards you.
2. Remove the cable cover from the left and right hinges.
Indice
Altri manuali Stryker Monitor
Stryker
Stryker WiSe 26 inch HDTV Manuale utente
Stryker
Stryker visionpro 0240-031-020 Manuale utente
Stryker
Stryker VisionElect 240-030-930 Manuale utente
Stryker
Stryker VisionPro EDAM Manuale utente
Stryker
Stryker 0240-031-050 Manuale utente
Stryker
Stryker 240-030-960 Manuale utente
Stryker
Stryker VisionPro Manuale utente
Stryker
Stryker 0240-030-960 Manuale utente
Stryker
Stryker 0240-031-000 Manuale utente
