STA 01‐360 series 3
Intended use:
This product is intended for use by professional
and commercial photographers in a studio envi-
ronment with a high ceiling. The wheels are de-
signed to be used indoors on a floor that is
smooth, hard, flat and unobstructed. The Studio
Stands with internal counterweight are designed
to be used at all times with a load (Camera or
laptop shelf or both). CAUTION: This product is
not recommended for use by hobbyists or in a
household environment with a low ceiling or car-
peted floors. Carpeting or pitted surfaces are
not recommended because of the increased
rolling resistance which can cause the stand to
tip over. If the surface is not ideal, the stand
must be moved with CAUTION, very slowly, us-
ing both hands one at the top and the other at
the bottom to steady the stand in order to pre-
vent the stand from tipping over. If the surface is
not ideal, lower the load to waist level before
moving the stand. We also recommend the use
of a sandbag or weight attached at the base
when conditions are not ideal to prevent tipping
over. Ultimately it’s the users responsibility to
understand how the stand operates and to use
the stand within its specification limits, as in-
tended to insure their own safety and the safety
of their equipment. It is also recommended to
use a short tether cable to secure the camera to
the stand in the event that the head, head plate,
attachment stud or camera adapter plate comes
loose or fails. Some assembly is required, we
recommend using an assistant during the initial
product assembly. Please read all documenta-
tion prior to assembly.
