Subsite Marksman Series Istruzioni operative
Marksman Series Beacons
Intended Use
The Subsite® Electronics Marksman Series beacons are designed to function as
one part of a guidance system for horizontal directional drills. These beacons
transmit roll, temperature, battery status, and pitch information and perform
best in Subsite Electronics approved downhole tool housings.
This system is intended for operation only according to the instructions in this
manual. Operate equipment in temperatures from -4°F to 221°F (-20°C to 105°C).
Contact your Subsite Electronics dealer for provisions required for operating in
extreme temperatures. Use in any other way is considered contrary to the
intended use.
Subsite and Ditch Witch are registered trademarks of Charles
Machine Works, Inc.
This product and its use may be covered by one or more patents at http://charlesmachine.works/
patents/.
NOTICE: High temperature is the primary cause of beacon failure. Monitor
beacon carefully. See “Communication Features” on page 7.
Rev A - 04/21
790-1238
ORIGINAL INSTRUCTION
Foreword
This manual is an important part of your equipment. It provides safety
information and operation instructions to help maintain your Subsite Electronics
equipment.
Read this manual before using your equipment. Keep it with the equipment at all
times for future reference. If you sell your equipment, be sure to give this manual
to the new owner.
If you need a replacement copy, contact your Ditch Witch dealer. If you need
assistance in locating a dealer, visit our website at www.subsite.com or write to
the following address:
Subsite Electronics
ATTN: Product Support
1950 W. Fir
Perry, OK 73077-0066
USA
The descriptions and specifications in this manual are subject to change without
notice. The Charles Machine Works, Inc. reserves the right to improve
equipment. Some product improvements may have taken place after this manual
was published. For the latest information on Ditch Witch equipment, see your
Ditch Witch dealer.
Thank you for buying and using Subsite Electronics equipment.
Regulatory Notices
United States
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Changes or modifications not
expressly approved by The Charles Machine Works, Inc. could void the user’s authority to operate
the equipment.
This machine has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in
accordance with the instructions, can cause harmful interference to radio communications.
Operation of this equipment in a residential area could cause harmful interference which the user
will be required to correct at his own expense. Changes or modifications not expressly approved by
The Charles Machine Works, Inc. could void the user’s authority to operate the equipment.
Contains FCC ID: QOQBT121
Canada
CAN ICES-003(A)/NMB-3(A)
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Contains IC ID: 5123A-BGTBT121
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit
pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
Contient IC ID: 5123A-BGTBT121
EU Declaration of Conformity
Hereby, Charles Machine Works declares that the radio equipment type Marksman Series HDD
tracking and guidance equipment is in compliance with Directive 2014/53/EU. The full extent of the
EU declaration of conformity is available by visiting https://subsite.com/about-us/contact-us or by
emailing a request to service@subsite.com.
Equipment Modification
This equipment was designed and built in accordance with applicable standards and regulations.
Modification of equipment could mean that it will no longer meet regulations and may not function
properly or in accordance with the operating instructions. Modification of equipment should only
be made at authorized repair centers.
Safety
Safety Alert Classifications
These classifications and the icons defined on the following pages work together
to alert you to situations which could be harmful to you, jobsite bystanders, or
your equipment. When you see these words and icons in the book or on the
machine, carefully read and follow all instructions. YOUR SAFETY IS AT STAKE.
When you see this safety alert sign, carefully read and follow all
instructions.
YOUR SAFETY IS AT STAKE. Read this entire section before using your
equipment.
Watch for the three safety alert levels: DANGER, WARNING, and CAUTION. Learn
what each level means.
indicates a hazardous situation that, if not avoided, will result in
death or serious injury. This signal word is to be limited to the most extreme
situations.
indicates a hazardous situation that, if not avoided, could result
in death or serious injury.
indicates a hazardous situation that, if not avoided, could result
in minor or moderate injury.
Watch for two other words: NOTICE and IMPORTANT.
NOTICE indicates information considered important, but not hazard-related (e.g.,
messages relating to property damage).
IMPORTANT can help you do a better job or make your job easier in some way.
Guidelines
Follow these guidelines before operating any jobsite equipment:
• Complete proper training.
• Read and understand operator’s manual before using equipment.
• Wear personal protective equipment.
• Mark proposed path with white paint and have underground utilities located
before working. In the US or Canada, call 811 (US) or 888-258-0808 (US and
Canada). Also contact any local utilities that do not participate in the One-Call
service. In countries that do not have a One-Call service, contact all local
utility companies to have underground utilities located.
• Classify jobsite based on its hazards and use correct tools and machinery,
safety equipment, and work methods for jobsite.
• Mark jobsite clearly and keep spectators away.
• Review jobsite hazards, safety and emergency procedures, and individual
responsibilities with all personnel before work begins.
• Fully inspect equipment before operating. Repair or replace any worn or
damaged parts. Replace missing or damaged safety shields and safety alert
signs. Contact your Ditch Witch dealer for assistance.
• Replace missing or damaged safety signs.
• Use equipment carefully per the instructions in this manual. Stop operation
and investigate anything that does not look or feel right.
• Contact your equipment dealer if you have any questions about operation,
maintenance, or equipment use.
Misuse of machine can cause
death or serious injury. Read and understand
operator’s manual and all other safety
instructions before use. Know how to use all
controls.
Safety Alerts
Lithium cell batteries. Fire or
explosion can cause death or serious injury.
Follow proper care, handling, and charging
precautions. See operator’s manual.
To help avoid injury:
• Turn off equipment and remove accessories
before opening battery compartment.
• Only charge with approved battery charger.
• Do not crush, heat or incinerate, short
circuit, dismantle, or immerse in fluid.
• Use proper disposal.
• Follow proper shipping procedures for Class
9 batteries.
Hot batteries. Contact can cause
injury. Only touch when cool or wear gloves.
Communication Features
Roll angle transmission: 24 positions
Pitch: sent in 0.1% increments from -100% (45° down) to +100% (45° up)
Battery: sent in 5% increments
Beacon temperature: sent in 5°C increments
IMPORTANT:
• Beacon will sleep after ten minutes of inactivity. To wake, roll slowly.
• Beacon operating time is counted while beacon is awake. Remove battery
when not in use.
NOTICE: Monitor beacon temperature carefully.
• Operating beacon at temperatures above 221°F (105°C) will cause beacon
to overheat and will void beacon warranty.
• If temperature goes above 161°F (72°C), tracker alarm will sound. Stop
drilling, pull back 3’ (1m) and pump drilling fluid downhole until beacon
cools.
Install Battery
1. Unscrew battery cap (1) from
beacon housing (2).
2. Insert battery (4, 5) as shown.
3. If needed, insert adapter (3) as
shown.
4. Reinstall battery cap.
5. Check beacon function. See
tracker operator’s manual for
more information.
Explosive hydrogen gas. Fire or
explosion can cause death or serious injury.
Keep heat flames, sparks, and other sources of
ignition away.
To help avoid injury:
• Not all batteries perform in the same environmental conditions. See
“Specifications” on page 9 for battery operating temperatures.
• Refer to Safety Data Sheet (SDS) for additional information regarding
battery.
NOTICE: Check condition and function of threads, foam washers, springs, and
o-rings. Replace if needed.
IMPORTANT: For maximum performance, use only an approved battery. Use
of non-approved battery will limit power level options and reduce battery life.
See “Specifications” on page 9.
IMPORTANT: When flat
top on front isolator is at
12 o’clock, tracker should
display 3 o’clock roll.
e26om027w21.eps
1
34
5
2
Specifications
Dimensions US Metric
Size 17.8in x 1.5in 452mm x 38mm
Weight (with battery) 2.3lb 1.04kg
Environmental US Metric
IP Rating IP67
Operating temperature -4° to 221°F -20° to 105°C
Storage temperature -4° to 221°F -20° to 105°C
Operation
Product contains Bluetooth® radio
Battery US Metric
Electrochem CC 3.67V lithium thionyl choloride
Battery operating temperature -40° to 302°F -40° to 150°C
Battery life 70 hours
Battery life (H) 30 hours
Battery rating 15Ah
Klarus 21GT-50 5000mAh lithium-ion (with adapter)
Battery operating temperature -4° to 140°F -20° to 60°C
Battery charging temperature 32° to 113°F 0° to 45°C
Battery life 23 hours
Battery life (H) 10 hours
Battery rating 5Ah
Support
Procedure
Notify your dealer immediately of any malfunction or failure of Subsite Electronics equipment.
Always give model, serial number, and approximate date of your equipment purchase. This
information should be recorded and placed on file by the owner at the time of purchase.
Return damaged parts to dealer for inspection and warranty consideration if in warranty time
frame.
All repairs must be done by an authorized Subsite Electronics repair facility. Repairs done elsewhere
will void warranty.
Resources
Publications
Contact your dealer for publications and videos covering safety, operation, maintenance, and repair
of your equipment.
Training
For information about on-site individualized training, contact your dealer.
Indice
Altri manuali Subsite Sistema di sicurezza
Manuali Sistema di sicurezza popolari di altre marche
EDM
EDM Solution 6+6 Wireless-AE Manuale utente
Highway Safety Group
Highway Safety Group EA401 Manuale utente
Siren
Siren LED GSM Manuale utente
Detection Systems
Detection Systems 7090i Istruzioni per il montaggio
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuale utente
Siemens
Siemens FDM273 Manuale utente