Sudio Rafter Manuale utente
Rafter 36” Bathroom Vanity
Page 1of 4
Before beginning assembly, we encourage you to take a few minutes to go through this booklet. It contains
important information on installation and care tips to keep your furniture looking as good as new.
Thank you for Shopping with us!
We hope we were able to provide your home with the perfect vanity. This vanity has been constructed with design,
quality and functionality in mind. We hope you enjoy this new addition!
Your feedback is invaluable to us and we would love to hear about your experience. Please take the
time to leave us a review.
Rafter 36” Bathroom Vanity
Page 2of 4
STEP 1
•Place the vanity in the desired location.
•Ensure the vanity is level. Shim legs, if necessary.
•The drawers need to be removed to assist with plumbing installation and to secure the vanity to the wall. Locate
the plastic clips located on both sides of the bottom of the drawer. At the same time, press the right spring clip
downward and the left spring clip upward. Once both spring clips are held in the indicated position, pull the
drawer straight out.
•Install the faucet and all plumbing.
•Using the appropriate screws and wall anchors secure the vanity to the wall through the back rail panel of the
vanity.
Before installation, please check received items in below “Part List”. Please report any missing items to your
retailer immediately.
Part List
Part A - Vanity w/top 1 PC
Part B - Backsplash 1PC
•Ensure there are no water leaks.
•To reinsert the drawers, close completely both
drawer slides attached to the vanity. Move the
component of the slides with ball bearings to the
front of the slides, maintaining the slides completely
closed. Carefully line up the slides of the drawer box
with the slides in the base cabinet and close the
drawer all the way to the back. Open the drawer
completely to ensure it is properly installed.
Part C - Door
Part D - Hardware 2PCS
NOTES, ASSEMBLY AND INSTALLATION
● Faucet, drain, silicone and all other plumbing components, tools & hardware are not included.
● Handling will require two people.
● Ensure the vanity is installed on a level floor. Unevenness can cause the vanity to become misaligned,
resulting in twisting of the cabinet. Repair any uneven areas with shims.
● Ensure all building & plumbing codes are respected. Professional installation recommended.
Rafter 36” Bathroom Vanity
Page 3of 4
STEP 2
Install the door by aligning the bottom of the door to the floor track and the top wheels of the door to the upper
track and then slide down into place.
Once the door is in place and the top wheels are secured on the track, secure the door in place by inserting the
screws just below the wheels (see sketch below)
STEP 3
•With the vanity in its location and all plumbing in place, apply a bead of silicone to the unpolished back
side and bottom edge of the backsplash and secure it to the vanity and wall.
•Wipe away any excess silicone immediately.
Ensure that you apply the silicone to the rough
edge and that the smooth face is facing the front
D
Rafter 36” Bathroom Vanity
Page 4of 4
CARE, CLEANING AND MAINTENANCE
DIMENSIONS
TOP VIEW BACK VIEW
•Dust regularly with a soft, dry cloth.
•Avoid the use of all chemicals, household cleaners and abrasives that may damage finish.
•Excessive exposure to sunlight and extreme changes in temperature and moisture can damage wood
furniture.
•Avoid placing hot appliances, such as curling irons and hot hair dryers directly on the countertop.
•Avoid placing extremely heavy items on the countertop.
•Stone countertops are surprisingly resilient to stains and scratches. However, as a preventative measure,
any spills on the stone surfaces should be wiped up within a reasonable amount of time. Don't let liquid sit
on the stone overnight. Stone countertops are most prone to staining by oil and acid, so be sure to
blot these spills up as soon as they happen. Follow up by cleaning the stone with a mild non-abrasive
soap and water. In bathrooms specifically, stone tends to attract soap scum, just like man-made tile.
Rinse vanity top with clean, hot water frequently. The use of sealers is also a powerful preventative
measure. Your stone was sealed at the factory, but reapplication is necessary over time. The
frequency of countertop use and quality of the sealer will determine how often it needs to be reapplied.
We recommend using a penetrating non-toxic sealer for bath areas, but a food-safe sealer is typically
not necessary.
•If stains and scratches on top countertop occur, there are many things you can do as a consumer to
remove them. Remove oil-based stains with acetone, mineral spirits, or ammonia. Organic stains like
coffee, tea, or juice can be removed with hydrogen peroxide, mixed with a few drops of ammonia. Water
spots or rings are the most common problem with bath vanities, and are caused by minerals left behind
when water evaporates. These can be removed by buffing the spots gently with 00 gauge steel wool. Small
nicks and scratches can often be removed the same way.
•Larger scratches, chips, and resilient stains on the countertop may require professional assistance.
Please contact your local stonemason for details.
Indice
Altri manuali Sudio Apparecchio per il bagno
