Summit Appliance SCUF 18 Guida all'installazione

6. Repairs to parts or systems resulting from unauthorized modifica-

tions made to the freezer.

7. Expenses for travel and transportation for product service in re-

mote locations.

8. The removal and reinstallation of your freezer if it is installed in an

inaccessible location or is not installed in accordance with published

installation instructions.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WAR-

RANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. IMPLIED WAR-

RANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORT-

EST PERIOD ALLOWED BY LAW. WARRANTOR SHALL NOT BE LIABLE FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT AL-

LOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUEN-

TIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WAR-

RANTIES OF MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR

LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPE-

CIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH

VARY FROM STATE TO STATE.

5 YEAR COMPRESSOR WARRANTY

1. The compressor is covered for 5 years.

2. Replacement does not include labor.

Keep this book and your sales slip together for future reference.

You must provide proof of purchase or installation date for in-

warranty service. Write down the following information about your

major refrigerator to better help you obtain assistance or service if

you ever need it. You will need to know your complete model num-

ber and serial number. You can find this information on the model

and serial number label located on the product.

Dealer name__________________________________________

Address ______________________________________________

Phone number__________________________________________

Model number __________________________________________

Serial number ___________________________________________

Purchase date ___________________________________________

SUMMIT APPLIANCE

If you need service or call with a question, have this

information ready. We advise you to keep this Owners

Manual in your possession.

MODEL:

SERIAL NUMBER:

DATE OF PURCHASE:

Felix Storch, Inc.

770 Garrison Avenue

Bronx, NY 10474

SUMMIT APPLIANCE

SCUF 18/20/25

Summit Frost Free Freezer

Table of Contents

Freezer Safety Page 2

Safety Instructions

Proper Disposal of Your Old Freezer

Installation Instructions Page 3

Key Eject Lock

Location Requirements Page 4

Adjusting the Door Page 5

Freezer Use

Digital Thermostat Instructions Page 6

Freezer Care Page 6-8

Cleaning your frost-free freezer

Base Grill

Changing the light bulb

Loss of Power

Moving Care

Troubleshooting Page 8-10

Service and Warranty Page 11-12

SUMMIT APPLIANCE

FREEZER SAFETY

Your safety and the safety of others are very important to us.

We have provided many important safety messages in this manual

and on your appliance. Always read and obey all safety messages.

You can be killed or seriously injured if you don’t follow instructions.

All safety messages will tell you what the potential hazard is, tell you

how to reduce the chance of injury, and tell you what can happen if

the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury when

using your refrigerator, follow these basic precautions:

• Plug into a grounded 3 prong outlet.

• Do not remove ground prong.

• Do not use an adapter.

• Do not use an extension cord.

• Disconnect power before servicing.

• After servicing, replace all parts and panels before operating.

• Use nonflammable cleaner.

• Keep flammable materials and vapors, such as gasoline, away from

freezer.

• Use two or more people to move and install freezer.

• Remove doors or lid from your old freezer.

[SUFFOCATION HAZARD]

Proper Disposal of Your Old Freezer

Suffocation Hazard

Remove doors from your old freezer.

Leave shelves in place.

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check

“Troubleshooting.” It may save you the cost of a service call. If you

still need help, follow the instructions below.

When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will

help us to better respond to your request.

If You Need Replacement Parts

If you need to order replacement parts, we recommend that you only

use factory specified parts. Factory specified parts will fit right and

work right, because they are made with the same precision used to

build every new SUMMIT® appliance.

Call customer service toll free in the U.S.A. toll free:

1-800-287-8799 Monday to Friday 9:00 am. — 5:00 p.m. (EST).

FREEZER WARRANTY

ONE YEAR LIMITED WARRANTY

For one year from the date of purchase, when this freezer is oper-

ated and maintained according to instructions attached to or fur-

nished with the product, warrantor will pay for factory specified

parts and repair labor to correct defects in materials or workman-

ship. Service must be provided by a designated service company.

ITEMS WARRANTOR WILL NOT PAY FOR

1. Service calls to correct the installation of your freezer, to instruct

you how to use your freezer, to replace or repair house fuses or to

correct house wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs. Consum-

able parts are excluded from warranty coverage.

3. Damage resulting from accident, alteration, misuse, abuse, fire,

flood, acts of God, improper installation, installation not in accor-

dance with electrical or plumbing codes, or use of products not ap-

proved by warrantor.

4. Replacement parts or repair labor costs for units operated outside

the United States.

SUMMIT APPLIANCE

• Does the freezer need to be cleaned? See “Freezer Care.”

• Are the air vents blocked? This prevents cold air movement.

Move objects away from the air vents. See “Ensuring Proper Air Cir-

culation” for air vent locations.

• Is the door opened often? Be aware that the freezer will warm

when this occurs. In order to keep the freezer cool, try to get every-

thing you need out of the freezer at once and close the door as soon

as the material is removed.

• Has a large amount of material just been added to the freezer?

Adding a large amount of material warms the freezer. It can take sev-

eral hours for the freezer to return to the normal temperature.

• Is the control set correctly for the surrounding conditions? See

“Using the Control.”

The door will not close completely or is difficult to open

• Are containers blocking the door? Rearrange containers so that

they fit more tightly and take up less space.

• Are the shelves and basket out of position (on some models)?

Put the shelves and basket back into their correct positions.

• Are the gaskets dirty or sticky? Clean gaskets according to the

directions in “Freezer Care.”

• Does the freezer wobble or seem unstable? See “Adjust the

Door.”

The freezer clicks but does not run

• Has the local power failed? Unplug the freezer for 30 minutes to

allow the refrigeration system to equalize. During this time, keep the

door closed whenever possible.

SUMMIT APPLIANCE

INSTALLATION INSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install freezer.

Failure to do so can result in back or other injury.

1. Remove Packaging Materials

2. Remove tape and glue residue from surfaces before turning on the

freezer. Rub a small amount of liquid dish soap over the adhesive with

your fingers. Wipe with warm water and dry.

3. Do not use sharp instruments, rubbing alcohol, flammable fluids, or

abrasive cleaners to remove tape or glue. These products can damage

the surface of your freezer. For more information, see ‘Freezer

Safety.”

4. When Moving Your Freezer:

Your freezer is heavy. When moving the freezer for cleaning or ser-

vice, be sure to protect the floor. Always pull the freezer straight out

when moving it. Do not wiggle or “walk” the freezer when trying to

move it, because floor damage can occur.

5. Clean Before Using

After you remove all of the packaging materials, clean the inside of

your freezer before using it. See the cleaning instructions in “Freezer

Care.”

Key Eject Lock

To lock or unlock the freezer, you must hold the key in the lock while

turning. The lock is spring loaded, so the key cannot be left in the

lock.

If the key is lost, contact your dealer for a replacement. Always give

the model and serial number of your freezer when requesting a re-

placement key.

SUMMIT APPLIANCE

LOCATION REQUIREMENTS

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away

from freezer.

Failure to do so can result in death, explosion, or fire.

IMPORTANT: Do not install the freezer near an oven, radiator, or

other heat source, nor in a location where the temperature will fall

below 40°F (5°C).

Check the strength of the floor before installing your freezer. It

should hold the weight of a fully loaded freezer. Allow at least 3” (7.5

cm) of airspace at the top and on both sides of the freezer and 1” (2.5

cm) between the back of the freezer and the wall. If the freezer is

going to be placed against a wall, leave extra space on the hinge

side so the door can open wider than its width.

NOTE: This freezer may be installed side by side with another freezer

or refrigerator. Allow for a 3’ (7.5 cm) clearance at the top and sides

and a ¼” (0.64 cm) clearance between the appliances.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or

electrical shock.

Recommended grounding method

A 115 Volt, 60 Hz. AC only 15- or 20- amp fused or circuit breaker,

grounded electrical supply is required. It is recommended that a

separate circuit serving only your freezer be provided. Use outlets

that cannot be turned off by a switch or pull chain. Do not use an

extension cord.

• Is the power supply cord unplugged? Plug into a grounded 3

prong outlet.

• Is a light bulb loose in the socket or burned out? See “Changing

the Light Bulb.”

The motor seems to run too much

• Is there something preventing the door from closing? Move the

package so the door closes properly.

• Is the room temperature hotter than normal? The motor will run

longer under warm conditions. At normal room temperatures, your

motor will run about 40% to 80% of the time. Under warmer condi-

tions, it will run even more.

• Has a large amount of product just been added to the freezer?

Adding a large amount of product warms the freezer. The motor nor-

mally will run longer to cool the freezer back down.

• Is the door opened often? The motor will run longer when this oc-

curs. Conserve energy by getting all items out at one time, and clos-

ing the door as soon as possible.

• Is the control set correctly for the surrounding conditions? See

“Using the Control.”

• Is the door or not closed completely? Push the door firmly shut. If

it will not shut all the way, see “The door will not close completely”

later in this section.

• Are the condenser coils dirty (on some models)? This prevents

air transfer and makes the motor work harder. Clean the condenser

coils. See “Freezer Care.”

• Is the door gasket sealed all the way around? Contact a qualified

person or a technician.

• Is there enough air circulation space around the freezer? See

“Location Requirements.”

NOTE: If the problem is not due to any of the above, remember that

your new freezer will run longer than your old one due to its high-

efficiency motor.

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

SUMMIT APPLIANCE

Loss of Power

After the power is restored, unplug the freezer for 30 minutes, to al-

low the refrigeration system to equalize. During this time keep the

door closed whenever possible.

REMEMBER: A full freezer stays cold longer than a partially filled

one.

Moving Care

1. Remove all containers.

2. Unplug the freezer.

3. Clean it thoroughly.

4. Tape the freezer shut and tape the electrical cord to the cabinet.

When you get to your new location, refer to the “Installation Instruc-

tions” and “Freezer Use” sections for information on installation and

setting the controls.

TROUBLESHOOTING

Try the solutions suggested here first to avoid the cost of an un-

necessary service call...

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or

electrical shock.

• Is the power supply cord unplugged?

Plug into a grounded 3 prong outlet.

• Has a circuit breaker tripped?

Reset the circuit breaker.

The lights does not work

SUMMIT APPLIANCE

Adjusting the Door

1. Locate the two front leveling legs taped among the packing materi-

als.

2. Screw these legs into the front holes on the bottom of the freezer.

The back of the freezer rests on two fixed supports.

3. Adjust the front legs just enough to lift the cabinet up off of the

floor.

NOTE: If your model is equipped with rollers, the front legs should

be lowered enough to lift the rollers off of the floor to ensure the

freezer does not roll forward when the door is opened.

4. Place a leveling tool on top of the freezer first side to side, then

front to back. Turn leg counterclockwise to raise a corner. Turn leg

clockwise to lower a corner.

5. Repeat Step 4 until freezer is level.

6. After freezer is fully loaded, recheck with level as in Step 4.

REFRIGERATOR USE

In order to ensure proper temperature, you need to permit proper

airflow in the freezer. As shown in the illustration, cool air enters

through the freezer wall and moves down. The air then re-circulates

through the vent near the bottom.

Do not block any of these vents. If the vents are blocked, airflow will

be prevented, and temperature and moisture problems may occur.

Allow the freezer to cool 6 to 8 hours before filling. Never add more

than 2 to 3 lbs (907 to 1,350 g) of material per cubic foot (28.32 L) of

freezer space.

NOTE: When the freezer is first started, the compressor will run con-

stantly until the freezer is cooled, It may take up to 6 or 8 hours (or

longer), depending on room temperature and the number of times

the freezer door is opened. After the freezer is cooled, the compres-

sor will turn on and off as needed to keep the freezer at the proper

temperature.

The outside of your freezer may feel warm. This is normal. The

freezer’s design and main function is to remove heat from packages

and air space inside the freezer. The heat is transferred to the room

air, making the outside of the freezer feel warm.

SUMMIT APPLIANCE

Digital Thermostat Instructions

If you find that it is necessary to change the temperature setting for your

digital thermostat controlled freezer, please refer to the following in-

structions. The front panel of the thermostat is illustrated here:

To see the SETPOINT:

Push and immediately release the SET key -the display will show the

SET point value. Wait 5 seconds and the probe value will display again.

To change the SETPOINT:

Push and hold the SET key for more then 2 seconds to change the set

point value; The value of the set point will be displayed, and the

“snowflake” LED will start blinking.

To change the SET value:

Push the up or down arrows to the desired setting; The new setting will

be memorized after 15 seconds, provided no other keys are pushed.

FREEZER CARE

Cleaning Your Frost-Free Freezer

Explosion Hazard

Use nonflammable cleaner.

Frost-free means that you do not have to defrost your freezer.

Frost is removed by air moving and collecting any moisture and

depositing it on the cooling coil. The cooling coil periodically

warms up enough to melt the frost, and the water then flows down

to the drain pan (located behind the base grill) where it is evapo-

rated.

Complete cleaning should be done at least once a year.

1. Unplug freezer or disconnect power.

2. Remove all substances.

3. Wash the inside walls with a solution of mild detergent in warm

water or 2 tbs (26 mg) baking soda to 1 qt (0.95 L) warm water.

melting

snowflake snowflake

Up & Down arrows

“SET” key

SUMMIT APPLIANCE

• Do not use abrasive or harsh cleaners such as window sprays,

scouring cleansers, flammable fluids, cleaning waxes, concentrated

detergents, bleaches or cleansers containing petroleum products on

plastic parts, interior and door liners or gaskets. Do not use paper

towels, scouring pads, or other harsh cleaning tools. These can

scratch or damage materials.

4. Rinse well and wipe dry with a clean soft cloth.

5. Use the appropriate cleaning method for your exterior finish.

Painted metal: Wash exteriors with a clean sponge or soft cloth and

a mild detergent in warm water. Do not use abrasive or harsh clean-

ers, or cleaners designed for stainless steel. Dry thoroughly with a

soft cloth. For additional protection against damage to painted metal

exteriors, apply appliance wax (or auto paste wax) with a clean, soft

cloth. Do not wax plastic parts.

6. Plug in freezer or reconnect power.

7. Replace all containers.

Base Grill

To Remove and Replace the Base Grill:

1. Open the freezer door and remove the base grill by pulling down

and out from the top.

2. Replace the base grill by putting the clips in the openings in the

freezer panel. Push in until the base grill snaps into place.

Changing the light bulb

NOTE: Not all appliance bulbs will fit your freezer. Be sure to re-

place the bulb with one of the same size, shape, and wattage.

1. Unplug freezer or disconnect power.

2. Remove the light shield. From the front of the light shield, push

backward and down.

3. Replace the light bulb with an appliance bulb of the same wattage.

4. Replace the light shield.

5. Plug in freezer or reconnect power.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Summit Appliance Congelatore

Summit Appliance

Summit Appliance Accucold VT65M Manuale utente

Manuali Congelatore popolari di altre marche

Siemens

Siemens GU..D SERIES Manuale utente

Omcan

Omcan FR-CN-0155 Manuale utente

Beko

Beko FNE290E24W Manuale utente

Electrolux

Electrolux ARCTIS G 8 60 50-6I Manuale utente

Electrolux

Electrolux EUF2042AOX Manuale utente

Dometic

Dometic CoolFreeze CFX95DZ Manuale utente

Electrolux

Electrolux EUF7000W1 Manuale utente

Polar Electro

Polar Electro CT330 Manuale utente

MPM

MPM MPM-145-SK Series Manuale utente

SAF

SAF PRESTOTIG 200AC/DC Guida rapida

Zanussi

Zanussi ZFT11407WA Manuale utente

AEG

AEG A63190GT Manuale utente

AEG

AEG A81000TNW0 Manuale utente

Matsui

Matsui MUC50S15E Manuale utente

NEFF

NEFF G4344X8 Manuale utente

Frigidaire

Frigidaire FV 1246 H Manuale utente

Frigidaire

Frigidaire FFC13K1AW Manuale utente

Electrolux

Electrolux EU 2400C Manuale utente