SETTING THE ALARM
1. Move alarm on/off selector to OFF position'
2. Press and hold ALARM set button. Use the HOUR and MINUTE set buttons
- io i"itnu tirne you wish the alarm to sound. Release the ALARM ser button.
3. Move alarm on/oJf Selector to oN position. Alarm "on" indicator light will
appear in the upper left hand corner of disptay'
4. The "beep-tone" alarm sound will wake you at the desired time'
NOTE: Your clock has a 24 hour melrlory alarm' When setting your alaIm
time Ue sure to set it correctly AM or PM' l{ you wish to beawakened at the
,rme time the next day, move the alarm on/off selector to the oFF position
,nJ-tn"n to the ON psition before retiring' tl you do not wish to be
iwat<ened by the alarm, leave the switch in the OFF position'
SNOOZE REPEAT ALARM OPERATION
Whenthealarmsounds.simplytouchtheSNooZEbuttontosilencealarm-The
aiarm will sound again appioximately 9 minutes later. This can be repeated as
often as you wish, for uP to 2 hour.
To silence alarm, move on/off selector to OFF position'
WARNING:
To prevent electrical shock, do not expose.clock to rain or moisture' Do not
atiempt to disa5semble theiock - it does noicontain customer serviceable parts.
bo ncit use solvent cleaners on display yyindown. Never use polish or abrasive
cleanersonthecabinetastheymaydamagethesurface.Cleanwithasoftcloth
dampened with water only iG'sure power Jord is unplugged)' \
Do not expose clock to extrefile heat such as {ound near a radiator or stove' High
temperatuies may damage the cabinet as wdl a the components inside'
